Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 [All]

Author Topic: New Zipper Performance Red Shift 525 CAMs and Dual Piston CAM Tensioners  (Read 13038 times)

0 Members and 1 Guest are viewing this topic.

Dead_Reckoning

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 608
  • 03 SERK

I just stumbled across ad ad for New Zipper Performance Red Shift 525 CAMs and Red Shift Dual Piston Hydraulic CAM Tensioners.
The 525 CAMs state Increased TQ and HP at 2000 Range, but No dyno information using them on any FL.
They also claim quicker throttle response, Increased TQ and HP with the Red Shift Dual Piston CAM Tensioners.

Has anyone tried either of these yet?
Wondering if it is typical Ad Hype or some degree of performance?

DR
Logged
Government is best which governs least.

Power Commander 3 Tuner
Doherty Power PACC with K&N Air Filter
Screamin' Eagle® Hydraulic Cam Chain Tensioner and High-Flow Oil Pump
Headwinds 2" Bullet Passing Lights 50w'
Progressive 440HD Shocks & Monotube Fork cartridges
Dual Bulb Halogen Headlamp Kit

Fired00d

  • Global Moderator
  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 32639
  • Orange & Black SEEG... Can it get any better?
    • VA


    • CVO1: FLHTCSE

If you are thinking of these for your '03 SERK they may not be the ones for you...

Red Shift® 525 Cams for 2007-Up Touring Models

The new Red Shift® 525 Cams deliver an impressive gain in HP,with a HUGE increase in early torque – right where you accelerate around town and cruising on the highway!

Perfect for 96” and 103” 2007-Up Touring models, this cam was developed to deliver immediate passing power in 6th gear at 60-65 mph. Red Shift® 525 cams provide immediate throttle response and acceleration at or below 2,000 rpms without detonation

Red Shift® 525 cams have a unique design feature which produces an extremely fast and turbulent inlet charge in the combustion chamber at low rpms. Inducing turbulence in the chamber as early as possible is the secret to the 525’s tremendous results. This equates to immediate throttle response and acceleration in RPMs,lower than ever before possible on a stock 2007-up Twin Cam® engine.
 

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Logged
:pumpkin: 2004 Screamin’ Eagle Electra Glide :pumpkin:
Rinehart True Duals
SE Breather
SE Race Tuner
HogTunes Speakers
Zippers 575 Gear Drive Cams
Zippers Pro-Tapered Adjustable Push Rods
Zippers Oil Pressure Bypass Shim
Feuling Oil Pump
Feuling Lifters
Zumo 550 W/Flame Caps
Lyndall Z+ Brake Pads
CVOHarley Member #1234
PGR Member #754 (Since '05)
Proud Member EBCM #2.0

Dead_Reckoning

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 608
  • 03 SERK

If you are thinking of these for your '03 SERK they may not be the ones for you...

Red Shift® 525 Cams for 2007-Up Touring Models

The new Red Shift® 525 Cams deliver an impressive gain in HP,with a HUGE increase in early torque – right where you accelerate around town and cruising on the highway!

Perfect for 96” and 103” 2007-Up Touring models, this cam was developed to deliver immediate passing power in 6th gear at 60-65 mph. Red Shift® 525 cams provide immediate throttle response and acceleration at or below 2,000 rpms without detonation

Red Shift® 525 cams have a unique design feature which produces an extremely fast and turbulent inlet charge in the combustion chamber at low rpms. Inducing turbulence in the chamber as early as possible is the secret to the 525’s tremendous results. This equates to immediate throttle response and acceleration in RPMs,lower than ever before possible on a stock 2007-up Twin Cam® engine.
 

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:


I have asked Zipper about that "2007 and up".
I have upgraded to the new Billet Plate, larger Oil Pump and the Hydraulic Cam tensioners.
Waiting to see what they have to say.

Logged
Government is best which governs least.

Power Commander 3 Tuner
Doherty Power PACC with K&N Air Filter
Screamin' Eagle® Hydraulic Cam Chain Tensioner and High-Flow Oil Pump
Headwinds 2" Bullet Passing Lights 50w'
Progressive 440HD Shocks & Monotube Fork cartridges
Dual Bulb Halogen Headlamp Kit

grc

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 14216
  • AKA Grouchy Old Fart
    • IN


    • CVO1: 2005 SEEG2

I have asked Zipper about that "2007 and up".
I have upgraded to the new Billet Plate, larger Oil Pump and the Hydraulic Cam tensioners.
Waiting to see what they have to say.


There is one other difference, inner cam bearing size.  So unless they offer this cam in a hybrid version with the late model bearingless outer cam journals and the older model inner cam bearing journal size, often called a "conversion" cam, it still won't work even though you converted the cam plate to the new style.


Jerry
Logged
Jerry - 2005 Cherry SEEG  -  Member # 1155

H-D and me  -  a classic love / hate relationship.  Current score:  love 40, hate 50, bewildered 10.

SDCVO

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2917
  • 19 CVO RG-12 CVO RG
    • CA


    • CVO1: 2019 Mako Shark Roadglide
    • CVO2: 2012 Maple Roadglide
    • CVO3: 2019 BMW K1600 Grand America

Let us know what you find out. I have been reluctant to move away from the stock 255's because with my driving style, I am not willing to give up that "hit" at around 2200rpm's. I know I should change my style but I am just to fricken old to change. I love the way my 110 runs but would certainly love to get "more" without giving anything up (reliability, low end grunt etc). Thanks
Logged
Alan

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50536
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2

Those cams won't work in our older engines Dennis.  The cam plate change you did was an upgrade but it was an upgrade within the old format. 

Zippers has a better cam for your 103" engine anyway.  Check out the Redshift 575 if you're shopping Zippers.  Was designed for the 103" engine specifically and did a great job.
Logged

HILLSIDECYCLE.COM

  • Banned
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2085

The dual-piston tensioners, seem to be quite a nice unit.
Used 'em 3 times now.
A 124" build, tuned in Ohio, was commented, that "it was THE quietest 124, they had ever heard".
Note that it had Wood TW-9F-6 cams. :)
Scott
Logged

Dead_Reckoning

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 608
  • 03 SERK

Those cams won't work in our older engines Dennis.  The cam plate change you did was an upgrade but it was an upgrade within the old format.  

Zippers has a better cam for your 103" engine anyway.  Check out the Redshift 575 if you're shopping Zippers.  Was designed for the 103" engine specifically and did a great job.

Thanks Don
It is kind of a two fold question on my part. My neighbor, riding buddy - age 70, has and 09 RK and is on the fence right now about maybe a new 2013 RK or keep this one.
One of the things he really wants is that low rpm TQ, he rides 2 up a lot. One of the points for the 525 in his case would be "For Standard Heads".
As for Me, Thats - I will check out the 575s you mentioned.

DR
« Last Edit: August 20, 2012, 08:16:38 AM by Dead_Reckoning »
Logged
Government is best which governs least.

Power Commander 3 Tuner
Doherty Power PACC with K&N Air Filter
Screamin' Eagle® Hydraulic Cam Chain Tensioner and High-Flow Oil Pump
Headwinds 2" Bullet Passing Lights 50w'
Progressive 440HD Shocks & Monotube Fork cartridges
Dual Bulb Halogen Headlamp Kit

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50536
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2

The dual-piston tensioners, seem to be quite a nice unit.
Used 'em 3 times now.
A 124" build, tuned in Ohio, was commented, that "it was THE quietest 124, they had ever heard".
Note that it had Wood TW-9F-6 cams. :)
Scott

Dennis, if you check out the tensioners Hillside is mentioning here check this thread also:

http://www.cvoharley.com/smf/index.php?topic=74040.0

The parts had come up for discussion before when Hillside first suggested them to the site.  They may be great parts.  But while the agreement was not absolute and universal a general concensus seemed that paying twice as much as even Mother Harley gets for a part doing comparable work wasn't something most of us seemed willing to do.  Me included.

Single case anecdotal evidence notwithstanding it's also hard to be convinced these tensioners, in and of themselves, account for "THE quietest" (emphasis in original) engine someone ever heard.  Original sales hyperbole from the Zippers website made the following claims:

Restores Critical Camshaft Timing Events for Both Cylinders
- Reduced Valve Train Noise by Increasing Chain and Valve Train Stability
- Improved Throttle Response, Engine Acceleration and Engine Smoothness
- Increased Horsepower and Torque Throughout the Entire RPM Range
- Increased Valve Train Component Lifespan in High Performance Applications


Throttle response, increased horsepower and celestial imaginings to calm the mind.  All from a pair of chain tensioners.

These parts are for a 2007 and newer motor.  But the cam plate you put in does switch to the newer style tensioners.  So if you wanted to blow another $160 replacing the tensioners you just installed to gain "The quietest" motor with improved throttle response, horsepower, torque and better celestial calmness "throughout the entire RPM range" this is definitely the place to piss away $160 to consider spending your money.
Logged

HILLSIDECYCLE.COM

  • Banned
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2085

Oh.
Scott
Logged

smiley1049

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 401
Re: New Zipper Performance Red Shift 525 CAMs and Dual Piston CAM Tensioners
« Reply #10 on: August 20, 2012, 12:30:05 PM »

Here we go again
Logged

Dead_Reckoning

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 608
  • 03 SERK
Re: New Zipper Performance Red Shift 525 CAMs and Dual Piston CAM Tensioners
« Reply #11 on: August 20, 2012, 12:50:15 PM »

Here we go again

No we do not.
I came, I asked questions and I received answers.
I am not going that route. I have received good information from the group to convince me of that.

Cheers
DR
Logged
Government is best which governs least.

Power Commander 3 Tuner
Doherty Power PACC with K&N Air Filter
Screamin' Eagle® Hydraulic Cam Chain Tensioner and High-Flow Oil Pump
Headwinds 2" Bullet Passing Lights 50w'
Progressive 440HD Shocks & Monotube Fork cartridges
Dual Bulb Halogen Headlamp Kit

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50536
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: New Zipper Performance Red Shift 525 CAMs and Dual Piston CAM Tensioners
« Reply #12 on: August 20, 2012, 08:32:59 PM »

No we do not.
I came, I asked questions and I received answers.
I am not going that route. I have received good information from the group to convince me of that.

Cheers
DR


Aren't you glad your tensioners are already new ::) ?
Logged

Dead_Reckoning

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 608
  • 03 SERK
Re: New Zipper Performance Red Shift 525 CAMs and Dual Piston CAM Tensioners
« Reply #13 on: August 20, 2012, 08:38:02 PM »

Aren't you glad your tensioners are already new ::) ?

 :)Ayah, that I am.

Heard back from Zippers today. They suggested the 575, just exactly what you suggested.
According to Zippers the 575TC was made specifically for the CVO 103.

DR
Logged
Government is best which governs least.

Power Commander 3 Tuner
Doherty Power PACC with K&N Air Filter
Screamin' Eagle® Hydraulic Cam Chain Tensioner and High-Flow Oil Pump
Headwinds 2" Bullet Passing Lights 50w'
Progressive 440HD Shocks & Monotube Fork cartridges
Dual Bulb Halogen Headlamp Kit

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50536
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: New Zipper Performance Red Shift 525 CAMs and Dual Piston CAM Tensioners
« Reply #14 on: August 20, 2012, 08:47:10 PM »

:)Ayah, that I am.

Heard back from Zippers today. They suggested the 575, just exactly what you suggested.
According to Zippers the 575TC was made specifically for the CVO 103.

DR


It was.  There's a lot that Zippers does wrong (support after the fact, general verity, and the band plays on) but that cam isn't one of their failings.  It's a good cam for your engine.  Early and strong torque curve.  I ran it for a couple years.  Never a complaint.  It's a really good cam choice.
Logged

Dead_Reckoning

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 608
  • 03 SERK
Re: New Zipper Performance Red Shift 525 CAMs and Dual Piston CAM Tensioners
« Reply #15 on: August 20, 2012, 08:58:09 PM »

It was.  There's a lot that Zippers does wrong (support after the fact, general verity, and the band plays on) but that cam isn't one of their failings.  It's a good cam for your engine.  Early and strong torque curve.  I ran it for a couple years.  Never a complaint.  It's a really good cam choice.

Thanks for the information Don.
It certainly looks like it covers my average rpm range.I like to maintain 2000 RPMs and above at all times and rarely do I see 5000 RPMs. It sounds like the 575 will fit right in my normal RPM Range, with some added TQ.

DR
Logged
Government is best which governs least.

Power Commander 3 Tuner
Doherty Power PACC with K&N Air Filter
Screamin' Eagle® Hydraulic Cam Chain Tensioner and High-Flow Oil Pump
Headwinds 2" Bullet Passing Lights 50w'
Progressive 440HD Shocks & Monotube Fork cartridges
Dual Bulb Halogen Headlamp Kit

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50536
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: New Zipper Performance Red Shift 525 CAMs and Dual Piston CAM Tensioners
« Reply #16 on: August 20, 2012, 11:16:06 PM »

Just looked back through some old records Dennis and found the report numbers from the tune after the install of the 575 cams in what used to be my 05.  Same 103 engine as your bike and your bike is lighter.  Following are HP~TQ numbers in 500 RPM increments starting at 2000 RPM.  Tuner was an artist with the dyno named John Golden (now retired).  As always they'll vary a bit from bike to bike and dyno to dyno.  But for purposes of illustrating the shape of the curve here you go:

2000        2500      3000       3500       4000     4500      4500       5000      5500

33~86   42~90   57~96   72~104   83~108   90~102   96~98   101~93   104~90
Logged

HILLSIDECYCLE.COM

  • Banned
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2085
Re: New Zipper Performance Red Shift 525 CAMs and Dual Piston CAM Tensioners
« Reply #17 on: August 21, 2012, 10:13:48 AM »

Lower production runs, fully machined, from higher quality materials, with better design features, would account for the higher costs, on these parts, but we are all aware of that, anyway. :)
Logged

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50536
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: New Zipper Performance Red Shift 525 CAMs and Dual Piston CAM Tensioners
« Reply #18 on: August 21, 2012, 01:18:12 PM »

Lower production runs, fully machined, from higher quality materials, with better design features, would account for the higher costs, on these parts, but we are all aware of that, anyway. :)

Yes.  But fortunately sometimes the distinction between good and better really is at a peripheral margin.  So we don't need to spend more just because we can.  Goes against the rules of ownership.  But sometimes it works out. 
Logged

HILLSIDECYCLE.COM

  • Banned
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2085
Re: New Zipper Performance Red Shift 525 CAMs and Dual Piston CAM Tensioners
« Reply #19 on: August 21, 2012, 02:21:16 PM »

They just seem like a better mouse trap, from this side of the fence. :)
Scott
Logged
Pages: 1 2 [All]
 

Page created in 0.207 seconds with 24 queries.