Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Hyd Clutch line length  (Read 1461 times)

0 Members and 1 Guest are viewing this topic.

TimBone

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 794
Hyd Clutch line length
« on: August 14, 2013, 07:55:23 PM »

Need help see if anyone can tell me the length of the Hyd Clutch line length on
a 2007 FLHTCUSE2.
Putting 14" bars on it and want to get this thing on order before tearing into the fairing.

Thanks for the help.
TimBone
Logged

redbeard719

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 336

    • CVO1: 2010 FLHXSE converted to FLTRXSE
    • CVO2: 2006 FLSTSCI
Re: Hyd Clutch line length
« Reply #1 on: August 15, 2013, 08:30:21 PM »

You can shop by bike at Magnum Shielding's website.

For 14" bars, +6 would probably do, depending on the bars. When I installed Yaffe 14" bars, +8 was perfect, but the bars were closer to 16".  YMMV.
« Last Edit: August 18, 2013, 11:05:50 AM by fish eye »
Logged

GMONEY

  • Newbie
  • *
  • Offline Offline
  • Posts: 44
Re: Hyd Clutch line length
« Reply #2 on: August 17, 2013, 10:56:16 PM »

Johnny Vaughn at HDBikeParts(dot)com is the cable guru
Logged
\_/ Chicks Dig Ape Hangers \_/
IronButt Assoc. #27301
Long Range Riding Platoon

TimBone

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 794
Re: Hyd Clutch line length
« Reply #3 on: September 01, 2013, 05:38:31 PM »

You can shop by bike at Magnum Shielding's website.

For 14" bars, +6 would probably do, depending on the bars. When I installed Yaffe 14" bars, +8 was perfect, but the bars were closer to 16".  YMMV.

Great, thanks for the scoop n that.
Logged

TimBone

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 794
Re: Hyd Clutch line length
« Reply #4 on: September 01, 2013, 05:39:41 PM »

Johnny Vaughn at HDBikeParts(dot)com is the cable guru

Thanks dude, great looking bars on your Road Glide!
Logged

DLSSOJC

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 89
Re: Hyd Clutch line length
« Reply #5 on: September 01, 2013, 09:31:42 PM »

I used a +4" line for 12" bars, so +6" should work fine.
Logged
 

Page created in 0.312 seconds with 25 queries.