Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2]  All

Author Topic: Thundermax 309-362 for TBW 2009-2010 touring HD  (Read 10694 times)

0 Members and 1 Guest are viewing this topic.

SILVER ROAD KING

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 108

    • CVO1: 2003 Screaming Eagle Deuce ! My Wife's !
Re: Thundermax 309-362 for TBW 2009-2010 touring HD
« Reply #15 on: June 03, 2010, 09:26:17 AM »

Guys I have a ThunderMax on my 04 and It has worked great but if you really want to get the most performance out of it you will have to put it on a dyno it is only going to tune within the parameters that is set in the map that you select or the one they load in it before it is sent to you. I had to call T Max a couple of times after the first install to change a few things the bike did not like about the map that was loaded from them they told me to get in touch with the guys at tmanperformance.com I called him and he confirmed what they said. Since he was not close to me I used Chris Waddel from Cycle Solutions to tune it the difference is outstanding! like getting on a different bike. My bike has had several things done to the engine I wont get into but before the Tune on the Dyno 35 to 38 mpg after the Tune it is getting 41 to 43 depending on how hard I ride it. With all that being said for my 2 cents it is well worth getting tuned on the Dyno.
Logged

jonandflo

  • Newbie
  • *
  • Offline Offline
  • Posts: 14
Re: Thundermax 309-362 for TBW 2009-2010 touring HD
« Reply #16 on: June 03, 2010, 09:31:58 AM »

I believe you can install the 2009 style exhaust systems on the 2010 models, and then use the thundermax unchanged. I don't think thundermax will ever make this system to fit the smaller oxygen sensors in the 2010 models because of the location of the sensors. They are quite far from the exhaust valves, and the system will function better with the sensor near each exhaust port. The 2010 models have the sensors near the crossover section of the exhaust where mixing of exhaust gases from both cylinders is likely. Call Vance and Hines and see if their 2009 power dual exhaust won't be an exact fit for your 2010 bike. That exhaust system has the old size oxygen sensor bungs where they belong and works GREAT with my thundermax. You could also call Zippers Performance directly and verify what I'm reporting here.
Logged

mjb765

  • 5k CVO Member
  • ***
  • Online Online
  • Posts: 6749

    • CVO1: 2011 FLHXSE--sold
    • CVO2: 2015 FLHXSE--sold
    • CVO3: 2018 FLTRXSE
Re: Thundermax 309-362 for TBW 2009-2010 touring HD
« Reply #17 on: June 21, 2010, 09:59:47 PM »

I called Thundermax toady questioning about using it on my 2010 SESG and was told that the 09 V&H pipes have the sensor bungs in a different location and there is a problem. Not a performance issue, but that the TMAX sensors may hit the top of the trans since they are bigger than stock HD sensors. Just my $.02
Logged

africa al

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 140
  • Travel the road less travelled

    • CVO1: CVO1 Black & Gold 2015
    • CVO2: CVO 2 Diamond Black & Slate Grey
    • CVO3: CVO 3 Sherwood Green & Aztec Black Road King SE6
Re: Thundermax 309-362 for TBW 2009-2010 touring HD
« Reply #18 on: June 28, 2010, 02:20:18 PM »

Well pleased to anounce that I now have my Thundermax Autotuner Installed on the bike. After taking advice from this site I returned my 2010 head pipes with 12mm bungs and ordered the 2009 pipes with the original 18mm bungs. Then just fitted the HO  V&H Mufflers. 09 Pipes fit no problem to the 2010 model. Bike runs great and I am realy pleased with these mods to my bike. Money well spent :pepper:
Logged

mjb765

  • 5k CVO Member
  • ***
  • Online Online
  • Posts: 6749

    • CVO1: 2011 FLHXSE--sold
    • CVO2: 2015 FLHXSE--sold
    • CVO3: 2018 FLTRXSE
Re: Thundermax 309-362 for TBW 2009-2010 touring HD
« Reply #19 on: June 28, 2010, 04:11:26 PM »

Glad to hear it....I am planning a TMax for later this summer or over the winter.
Logged

Jester_Red07

  • http://i73.photobucket.com/albums/i213/VROCKSE/RedJester034.jpg
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 125
  • FLHTCUSE 2 VRSCSE
Re: Thundermax 309-362 for TBW 2009-2010 touring HD
« Reply #20 on: July 19, 2010, 04:00:32 AM »

So if I put V & H TD head pipes on my 07 CVO , Will I need to order the 09 head pipes to work with my Tmax AT ???
Logged

guppytrash

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1537
Re: Thundermax 309-362 for TBW 2009-2010 touring HD
« Reply #21 on: July 19, 2010, 06:13:42 AM »

So if I put V & H TD head pipes on my 07 CVO , Will I need to order the 09 head pipes to work with my Tmax AT ???
No.  But you will need to get the Tmax for a 2007.
2008-2010 throttle by wire.  2010 has different O2 sensors and that is why he needed an 09 exhaust. 
Logged

vmi75man

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Re: Thundermax 309-362 for TBW 2009-2010 touring HD
« Reply #22 on: August 09, 2011, 01:03:28 PM »

S&S make dual headpipes with 4 bungs so they can be used on either 2009 or 2011 models.  Use that if you have a later model and all you have to do is remove the sensors, plug the bungs, put in thundermax, sensors, etc. and you are good to go.  Then you can change back to HD unit any time you want.
Logged
Pages: 1 [2]  All
 

Page created in 0.14 seconds with 24 queries.