Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1] 2  All

Author Topic: CAM change with 103 stage IV kit?  (Read 14768 times)

0 Members and 1 Guest are viewing this topic.

SemperFi82

  • Newbie
  • *
  • Offline Offline
  • Posts: 19
CAM change with 103 stage IV kit?
« on: February 21, 2010, 07:41:06 PM »


First things, I'd like to say hi to everyone and I hope to learn a lot of good things on this forum.  I'm investing in the Fat Boy Lo this spring and have been trying to gain as much knowledge as I can about the performance I want to have with it.
After looking at the different stage kits that are offered, the two choices that I've narrowed it down to are the 103 stage II and stage IV.
I'm no motor head and I've read a lot of different opinions on here about different cams. And the bike will be purchased with the kit installed and tuned so outsourcing cams from a 3rd party and having it installed with the kit is not ideal.  So here what it comes down to.
I've ridden a 09 CVO Springer and liked that power it had and I want to make sure that I'm not losing any from that bike. The 110 comes with the 255 cams but compression was 9.3:1 and the 103 will be 10.5:1.  Which cams should I get with the stage 4 kit?
1. Don't care about going speeds over 90-100 mph.
2. Will not be track raced or ridden extremely hard consistently.
3. Exhaust will be V&H Big shots staggered.  SE Heavy Breather intake

And here is the package I'm looking at.  Thanks people

SCREAMIN’ EAGLE® PRO
STAGE IV KIT – 103 CUBIC INCHes
Here's a 103 cubic inch racing kit that puts it all together
for you. If your looking to build a fast, track ready, 103 kit
and want to buy all the components you need to maximize
your results, here's the kit! This eliminates the guess work
on what components you should use and what works well
together. We've put all the components together including
SE performance heads that provide a great performance
upgrade for a 103ci at a very attractive price. Kit includes our
high performance / high flow Screamin’ Eagle Performance
110+ Heads which include large intake valves at 2.120" diameter
(our biggest ever), high compression forged aluminum
10.5:1 pistons matched to the 110+ heads, an SE260 cam to
open the valves appropriately, allowing the right balance of
air and fuel to enter, Perfect-Fit Pushrods to accommodate
the higher cam lift, a 58mm EFI throttle body to get that air
flow to the heads, big 3-7/8" diameter highlighted cylinders,
then topping off this kit off with a “must have” Super Tuner
to provide the right tuning capabilities. Kit includes gaskets.
For race application only.
27516-08A   Black. $2,399.95
Fits ’07-later Dyna®, ’07-later Softail® and


Logged

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3118
Re: CAM change with 103 stage IV kit?
« Reply #1 on: February 21, 2010, 10:31:41 PM »

It's not just the cam that makes this setup come on late
This is a high rpm setup and not conducive to this 6speed bike IMO. Not too many are happy with these when they are done and I have recieved a lot of calls from guys wanting to know how to get their low end torque back. Those heads would be right at home on a 117"+ motor but will be very slugish with that bike and the gearing they come with. All the power will be from 3,500 up.
Consider using the SE MCR heads and have them opened up (chamber) or use the stock heads ported and a shorter cam. Setups such as this can make easily 110/110 and have a very healthy wide torque curve that comes on right off idle.
Logged

HOGMIKE

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2345
  • 65 FLH 93" + others
Re: CAM change with 103 stage IV kit?
« Reply #2 on: February 21, 2010, 11:49:43 PM »

First things, I'd like to say hi to everyone and I hope to learn a lot of good things on this forum.  I'm investing in the Fat Boy Lo this spring and have been trying to gain as much knowledge as I can about the performance I want to have with it.
After looking at the different stage kits that are offered, the two choices that I've narrowed it down to are the 103 stage II and stage IV.
I'm no motor head and I've read a lot of different opinions on here about different cams. And the bike will be purchased with the kit installed and tuned so outsourcing cams from a 3rd party and having it installed with the kit is not ideal.  So here what it comes down to.
I've ridden a 09 CVO Springer and liked that power it had and I want to make sure that I'm not losing any from that bike. The 110 comes with the 255 cams but compression was 9.3:1 and the 103 will be 10.5:1.  Which cams should I get with the stage 4 kit?
1. Don't care about going speeds over 90-100 mph.
2. Will not be track raced or ridden extremely hard consistently.
3. Exhaust will be V&H Big shots staggered.  SE Heavy Breather intake

And here is the package I'm looking at.  Thanks people

SCREAMIN’ EAGLE® PRO
STAGE IV KIT – 103 CUBIC INCHes
Here's a 103 cubic inch racing kit that puts it all together
for you. If your looking to build a fast, track ready, 103 kit
and want to buy all the components you need to maximize
your results, here's the kit! This eliminates the guess work
on what components you should use and what works well
together. We've put all the components together including
SE performance heads that provide a great performance
upgrade for a 103ci at a very attractive price. Kit includes our
high performance / high flow Screamin’ Eagle Performance
110+ Heads which include large intake valves at 2.120" diameter
(our biggest ever), high compression forged aluminum
10.5:1 pistons matched to the 110+ heads, an SE260 cam to
open the valves appropriately, allowing the right balance of
air and fuel to enter, Perfect-Fit Pushrods to accommodate
the higher cam lift, a 58mm EFI throttle body to get that air
flow to the heads, big 3-7/8" diameter highlighted cylinders,
then topping off this kit off with a “must have” Super Tuner
to provide the right tuning capabilities. Kit includes gaskets.
For race application only.
27516-08A   Black. $2,399.95
Fits ’07-later Dyna®, ’07-later Softail® and


Welcome, and what Don said!!
 :2vrolijk_21:
Logged
HOGMIKE

SemperFi82

  • Newbie
  • *
  • Offline Offline
  • Posts: 19
Re: CAM change with 103 stage IV kit?
« Reply #3 on: February 22, 2010, 06:50:01 PM »

Thanks for the advice.  The more I read on this the more I realize that this maybe isn't the kit I'm looking for.  Might as well stay with the Stage II and maintain warranty because I'm not looking to run RPM's consistently high.  It sucks that HD sells this "kit" as if were almost plug in play with great performance.  Or maybe the target audience is a small few with a heavy bike, IDK.
So, if I were to have these heads below installed and opened up, what else what I need to complete it? race tuner, etc.?
Any good options to have these opened up in the Midwest? And/or would the Stage II kit with maybe a little mod be better off?
I'm guessing that if the warranty would be out the window if I had the motor running 115/115. But those numbers are what I'm looking for, just before the 6500 range. Also, what is the most common air cleaners that assist in producing power?
Sorry for all the questions, just want to get as close as possible to satisfaction when it's all said and done.

Thanks :)

Screaming EAGLE PRO TWIN CAM MCR
PERFORMANCE CYLINDER HEADS
3
We've combined the proven Screamin’ Eagle valve train
components and innovative port shapes from our Evolution®
1340 cylinder heads with the Twin Cam engine “bathtub”
combustion chamber with a volume of 76cc’s to create a cylinder
head that really performs. Valve spring can accommodate
up to .585" valve lift camshaft kits and up to 6500 RPM.
Heads are machined to accept Mechanical Compression
Release P/N 32076-04. All EFI models require ECM calibration
(priced separately). For race application only.
Fits ’99-later Twin Cam equipped models. ’99-’05 models
require separate purchase of (2) Intake Seal Flanges P/N
26993-06. ’06-later models re-use Original Equipment
Intake Seal Flanges.
16952-08 Black Highlighted. $949.95
16953-08 Silver Highlighted. $949.95
« Last Edit: February 22, 2010, 07:47:30 PM by SemperFi82 »
Logged

aka_Matt

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 96
Re: CAM change with 103 stage IV kit?
« Reply #4 on: February 22, 2010, 08:00:39 PM »

what about the stage 3 kit?? seems thats what u really want...
Logged
2004 XL1200C: Blue/Flames, Chrome Everything, 2-1 Rinehart, Mid-Controls, 17" Deuce Wheel, And More... For Sale

HOGMIKE

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2345
  • 65 FLH 93" + others
Re: CAM change with 103 stage IV kit?
« Reply #5 on: February 22, 2010, 08:05:03 PM »

Thanks for the advice.  The more I read on this the more I realize that this maybe isn't the kit I'm looking for.  Might as well stay with the Stage II and maintain warranty because I'm not looking to run RPM's consistently high.  It sucks that HD sells this "kit" as if were almost plug in play with great performance.  Or maybe the target audience is a small few with a heavy bike, IDK.
So, if I were to have these heads below installed and opened up, what else what I need to complete it? race tuner, etc.?
Any good options to have these opened up in the Midwest? And/or would the Stage II kit with maybe a little mod be better off?
I'm guessing that if the warranty would be out the window if I had the motor running 115/115. But those numbers are what I'm looking for, just before the 6500 range. Also, what is the most common air cleaners that assist in producing power?
Sorry for all the questions, just want to get as close as possible to satisfaction when it's all said and done.

Thanks :)

Screaming EAGLE PRO TWIN CAM MCR
PERFORMANCE CYLINDER HEADS
3
We've combined the proven Screamin’ Eagle valve train
components and innovative port shapes from our Evolution®
1340 cylinder heads with the Twin Cam engine “bathtub”
combustion chamber with a volume of 76cc’s to create a cylinder
head that really performs. Valve spring can accommodate
up to .585" valve lift camshaft kits and up to 6500 RPM.
Heads are machined to accept Mechanical Compression
Release P/N 32076-04. All EFI models require ECM calibration
(priced separately). For race application only.
Fits ’99-later Twin Cam equipped models. ’99-’05 models
require separate purchase of (2) Intake Seal Flanges P/N
26993-06. ’06-later models re-use Original Equipment
Intake Seal Flanges.
16952-08 Black Highlighted. $949.95
16953-08 Silver Highlighted. $949.95

I think you are on the right track.
First thing is to figure out what kind of riding you do, and what you expect from a build.
Next, figure in your budget.
Then, figure out if you or someone you trust will put it all together.
Doing homework will help you in the long run.
Keep us posted how things are going, sharing information and success is always welcome here!
 :2vrolijk_21:
Logged
HOGMIKE

SemperFi82

  • Newbie
  • *
  • Offline Offline
  • Posts: 19
Re: CAM change with 103 stage IV kit?
« Reply #6 on: February 22, 2010, 08:26:37 PM »

The results I'm looking for is to be quicker than the 1010 CVO Springer that I loved to ride. It had exhaust and tune, but other than that it was stock.
I did look at the Stage III kit at first for a while, but still it seems a lot of people are not happy the way it comes and end up digging deep.  Stage III also voids the warranty, so I figured if I was going to void it with the Stage III, why not spend the extra money and go with the IV. But even the Stage III and IV still show the same power until around 4000RPM and up, which I'm not in search of.  Would be nice and all, but maybe throwing some other Screaming Eagles parts together for around the same price will produce better results in the quicker numbers from the 0-60 range.  If I have to go elsewhere for a set of cams and to get ported, thats fine.  But I would like to get everything installed and tuned together and be happy. I know that I can save money, better products, and on if I go to a 3rd party but I would like to throw these parts and tune into the purchase of the bike.  
« Last Edit: February 22, 2010, 08:29:39 PM by SemperFi82 »
Logged

HOGMIKE

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2345
  • 65 FLH 93" + others
Re: CAM change with 103 stage IV kit?
« Reply #7 on: February 22, 2010, 08:31:11 PM »

I did look at the Stage III kit at first for a while, but still it seems a lot of people are not happy the way it comes and end up digging deep.  Stage III also voids the warranty, so I figured if I was going to void it with the Stage III, why not spend the extra money and go with the IV. But even the Stage III and IV still show the same power until around 4000RPM and up, which I'm not in search of.  Would be nice and all, but maybe throwing some other Screaming Eagles parts together for around the same price will produce better results in the quicker numbers from the 0-60 range.  If I have to go elsewhere for a set of cams and to get ported, thats fine.  But I would like to get everything installed and tuned together and be happy. I know that I can save money, better products, and on if I go to a 3rd party but I would like to throw these parts and tune into the purchase of the bike. 

Best bet would be to check with some of the vendors here that do this for a living, ask them if you can talk to one or two of their customers for feedback.
I spent 31 min. (just got my phone bill!) talking to a member here with similar riding style as me, and a build I am considering on my '10.
I will probably go that route even though it will void my warranty.
Just me, but, it helps to do some research.
 :2vrolijk_21:
Logged
HOGMIKE

SemperFi82

  • Newbie
  • *
  • Offline Offline
  • Posts: 19
Re: CAM change with 103 stage IV kit?
« Reply #8 on: February 22, 2010, 08:39:57 PM »

Thanks Mike. There sure is a lot of different opinions on these forums and a lot of good information. 
I've been searching for different results that people have had, all good stuff. 
If there is anyone that has the results I'm looking for, please help me out.  I take two cents at a time too!  ;)
Logged

04se103

  • Guest
Re: CAM change with 103 stage IV kit?
« Reply #9 on: February 22, 2010, 11:12:59 PM »

Hey Semperfi82 Welcome to the site glad you have joined us when you can go by the New Member Introduction and Introduce yourself over there.
                                                                                                              Thanks
Logged

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3118
Re: CAM change with 103 stage IV kit?
« Reply #10 on: February 22, 2010, 11:18:48 PM »

You can have this bike stomping that CVO for not a lot of money.
The plan
107" Pistons and stock barrels bored for them

Street Pro or Pro Street head package on the stock heads with compression releases, or SE $949 dollar MCR heads opened up to 84-85cc, clean up ports

Woods TW408-44 or TW8-6 depending on the level of headwork

51mm HPInc or SE 58 two piece TB optional

10.3-10.5/1 compression

S&S Roller rockers with the TW8-6

A good pipe which is not the V&H Radius or especially not the V&H Big Shots
A good pipe would be the stock head pipes and Cycle Shack slip-ons tapered, FatCat 2 into 1, Basanni Pro Street, Thunderheader. There are others

TTS tuner

A good tune by a qualified tuner

A performance oriented HD dealer will cover your motor as well as the bike if they do the work and forget about the Stage whatever packages.
This motor work will just be covered complimentary by the home dealer not on the road officially however.
Change your gearing 70 rear pulley and a 30 front.
Now you have a ripper that is streetable and reliable

« Last Edit: February 22, 2010, 11:23:48 PM by Deweysheads »
Logged

BMAC III

  • Newbie
  • *
  • Offline Offline
  • Posts: 16
Re: CAM change with 103 stage IV kit?
« Reply #11 on: February 23, 2010, 01:17:29 AM »

Best bet would be to check with some of the vendors here that do this for a living, ask them if you can talk to one or two of their customers for feedback.
I spent 31 min. (just got my phone bill!) talking to a member here with similar riding style as me, and a build I am considering on my '10.
I will probably go that route even though it will void my warranty.
Just me, but, it helps to do some research.
 :2vrolijk_21:

Mike, keep us posted on your 2010 103" plans.  I'm running the same stage one from Fullsac and would like to take the next step.

BMac
Logged

SemperFi82

  • Newbie
  • *
  • Offline Offline
  • Posts: 19
Re: CAM change with 103 stage IV kit?
« Reply #12 on: February 23, 2010, 12:08:12 PM »

I'm going to do a little research on this.  Any good places to ship heads for work?
You can have this bike stomping that CVO for not a lot of money.


The plan
107" Pistons and stock barrels bored for them

Street Pro or Pro Street head package on the stock heads with compression releases, or SE $949 dollar MCR heads opened up to 84-85cc, clean up ports

Woods TW408-44 or TW8-6 depending on the level of headwork

51mm HPInc or SE 58 two piece TB optional

10.3-10.5/1 compression

S&S Roller rockers with the TW8-6

A good pipe which is not the V&H Radius or especially not the V&H Big Shots
A good pipe would be the stock head pipes and Cycle Shack slip-ons tapered, FatCat 2 into 1, Basanni Pro Street, Thunderheader. There are others

TTS tuner

A good tune by a qualified tuner

A performance oriented HD dealer will cover your motor as well as the bike if they do the work and forget about the Stage whatever packages.
This motor work will just be covered complimentary by the home dealer not on the road officially however.
Change your gearing 70 rear pulley and a 30 front.
Now you have a ripper that is streetable and reliable
Logged

Unbalanced

  • FUD Examiner
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6708

    • CVO1: 2011 SESG,
    • CVO2: 2004 SEEG Pumpkin,
    • CVO3: 2002 Police Roadking, Maudie and Maybelle Slayer
Re: CAM change with 103 stage IV kit?
« Reply #13 on: February 23, 2010, 12:42:58 PM »

Here are some named porters you might consider contacting:

John Sachs   Florida   Ft. Lauderdale Florida 954-473-2980  site member as well
Dan Basiley   Oregon  http://www.baisley.com/the_team.htm
Cycle Rama  Florida  http://www.cycle-rama.com/
T-Man  N. Carolina  http://tmanperformance.com/
R&R  New Hampshire  http://cart.rrcycles.com/index.php?main_page=product_info&products_id=102
Bob Wright R&D performance in Watertown Mn 952-955-1198
Dave Mackie http://www.davemackie.com/
Logged
HBRR Florida Chapter,  STILL - The Fastest Chapter - Proven yet again Bikeweek 2017

sadunbar

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 11416
  • EBCM # Stealth - SSBS # 1.1 - SoA # Z&E2525 .01%
    • IL


    • CVO1: 2007 FLHTCUSE2
    • CVO2: 2000 FXR4
Re: CAM change with 103 stage IV kit?
« Reply #14 on: February 23, 2010, 04:59:22 PM »

Dave Mackie combustion chamber...
Logged
2007 Screamin Eagle Ultra Classic - Light Candy Cherry and Black Ice
Screamin Eagle 120r
Revolution Performance EMS
Fuel Moto Jackpot headpipes and 4.5" Pro Touring Mufflers
HPI 55mm Throttle Body w/5.3 injectors
BDL clutch w/VPC92T
Traxxion AK-20
Legend Air Suspension
Brembo Brake Calipers/Rotors
Garmin Zumo
575 Chubby's
Bushtec Quantum
Pages: [1] 2  All
 

Page created in 0.407 seconds with 25 queries.