www.CVOHARLEY.com
CVO Technical => Twin Cam => Topic started by: naitram on July 09, 2007, 11:30:36 AM
-
The Screamin' Eagle® Billet cam plate and high volume oil pump kit upgrades early model stock or large displacement performance twin cam engines. High flow rate/high scavenge rate oil pump, stock on '07 and later Twin cam 96 models, improves the stock oiling system to increase oil flow to piston oil jets, cam chain tensioner, pinion shaft bearings and connecting rod bearings. Increased oiling results in lower engine operating temperatures and increased performance. Bill Cam support plate is precision machined from 6061 Aluminum and anodized for durability, comes assembled with crankshaft bushing and oil pressure relief valve. Kit includes billet cam support plate, oil pump assembly, bearing retainer plate and chain guide riser.
25283-07
IN-STORE PURCHASE ONLY Contact dealer for pricing and availability.
Fits '99-'06 Touring and Softail® and '99-'05 Dyna® models.
MSRP US $429.95
(http://a1276.g.akamai.net/7/1276/734/3d32a7f80ad63d/resource.harley-davidson.com/media/images/productphotos/PNA/cam_plate1450_08_M_222d3.jpg)
-
Check this out!
Screamin' Eagle® Billet Cam Plate and High Volume Oil Pump
The Screamin' Eagle® Billet cam plate and high volume oil pump kit upgrades early model stock or large displacement performance twin cam engines. High flow rate/high scavenge rate oil pump, stock on '07 and later Twin cam 96 models, improves the stock oiling system to increase oil flow to piston oil jets, cam chain tensioner, pinion shaft bearings and connecting rod bearings. Increased oiling results in lower engine operating temperatures and increased performance. Bill Cam support plate is precision machined from 6061 Aluminum and anodized for durability, comes assembled with crankshaft bushing and oil pressure relief valve. Kit includes billet cam support plate, oil pump assembly, bearing retainer plate and chain guide riser.
25283-07 $429.95
http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524448771290&FOLDER%3C%3Efolder_id=2534374302491575&ASSORTMENT%3C%3East_id=2534374302491575&bmUID=1183995010926&bmLocale=en_US
Looks like we're getting some upgrades. I might be just in time for this! ;)
Hoist! 8)
-
Yad think the rotten sob's would put a decent oil pump in from the get go....Crikey! Wht the F can't they build a bike, build it right and then just charge me the effin money for it! Nukin Futs.
Miker
-
Check this out!
Screamin' Eagle® Billet Cam Plate and High Volume Oil Pump
The Screamin' Eagle® Billet cam plate and high volume oil pump kit upgrades early model stock or large displacement performance twin cam engines. High flow rate/high scavenge rate oil pump, stock on '07 and later Twin cam 96 models, improves the stock oiling system to increase oil flow to piston oil jets, cam chain tensioner, pinion shaft bearings and connecting rod bearings. Increased oiling results in lower engine operating temperatures and increased performance. Bill Cam support plate is precision machined from 6061 Aluminum and anodized for durability, comes assembled with crankshaft bushing and oil pressure relief valve. Kit includes billet cam support plate, oil pump assembly, bearing retainer plate and chain guide riser.
25283-07 $429.95
http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524448771290&FOLDER%3C%3Efolder_id=2534374302491575&ASSORTMENT%3C%3East_id=2534374302491575&bmUID=1183995010926&bmLocale=en_US
Looks like we're getting some upgrades. I might be just in time for this! ;)
Hoist! 8)
Don't you already have this?? :nixweiss: Being stock on a 96ci model for '07 I would think it would be on your 110ci.
BTW - I merged your thread w/the one that was already created about this upgrade.
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Don't you already have this?? :nixweiss: Being stock on a 96ci model for '07 I would think it would be on your 110ci.
BTW - I merged your thread w/the one that was already created about this upgrade.
:pumpkin:
Ride Safe,
Fired00d
:fireman:
He's like a kid at Christmas time, all jittery, missing the small details. :o
-
He's like a kid at Christmas time, all jittery, missing the small details. :o
:ROFLOL: :huepfenlol2: :huepfenjump3:
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Don't you already have this?? :nixweiss: Being stock on a 96ci model for '07 I would think it would be on your 110ci.
BTW - I merged your thread w/the one that was already created about this upgrade.
:pumpkin:
Ride Safe,
Fired00d
:fireman:
The '07's have this Oil Pump, but not this Billet Cam Plate! Yeah baby, that's what I'm talkin' about! It looks like the R&R one that GMR talks about, but thinner and works with stock exhausts. ;) Hoist! 8)
-
The '07's have this Oil Pump, but not this Billet Cam Plate! Yeah baby, that's what I'm talkin' about! It looks like the R&R one that GMR talks about, but thinner and works with stock exhausts. ;) Hoist! 8)
You're missing one little item of information:
Fits '99-'06 Touring and Softail® and '99-'05 Dyna® models.
It doesn't look like the plate fits the 07's.
-
You're missing one little item of information:
Fits '99-'06 Touring and Softail® and '99-'05 Dyna® models.
It doesn't look like the plate fits the 07's.
Crap, you're right! Why the hell did they do that? :nixweiss: Hoist! 8)
-
Crap, you're right! Why the hell did they do that? :nixweiss: Hoist! 8)
Man, I had already ordered it! Thanks Chief. Checking to see if the cam plate works with the '07. Thanks for the heads up Chief. You're right, like a kid in toy store! :nixweiss: Hoist! 8)
-
It does not appear that they have an SE Cam Plate Option for '07 and later models. The Part shown here will not be available for another 2 months either. Too bad the R&R cam plate doesn't work with FatCats! ::) Hoist! 8)
-
It does not appear that they have an SE Cam Plate Option for '07 and later models. The Part shown here will not be available for another 2 months either. Too bad the R&R cam plate doesn't work with FatCats! ::) Hoist! 8)
What about the Feuling Cam Plate??
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
What about the Feuling Cam Plate??
:pumpkin:
Ride Safe,
Fired00d
:fireman:
Gotta look into that d00d. Thanks for reminding me! :2vrolijk_21: Hoist! 8)
-
dood's always looking out for a Bro and to help spend their $$$! ;D Feuling does make a Cam Plate for '07's now. This is a new part for '06 Dynas and all '07's. P/N 8015. Just in time too! Ordered the Feuling Cam Plate, Feuling Pressure Relief Spring and Feuling Cam Plate/Oil Pump Fastener Kit. No need for their oil pump on the '07's. Thanks for looking out for me guys!!! ;) Hoist! 8)
-
dood's always looking out for a Bro and to help spend their $$$! ;D Feuling does make a Cam Plate for '07's now. This is a new part for '06 Dynas and all '07's. P/N 8015. Just in time too! Ordered the Feuling Cam Plate, Feuling Pressure Relief Spring and Feuling Cam Plate/Oil Pump Fastener Kit. No need for their oil pump on the '07's. Thanks for looking out for me guys!!! ;) Hoist! 8)
Heh, just want you to be happy w/your build. :2vrolijk_21:
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Heh, just want you to be happy w/your build. :2vrolijk_21:
:pumpkin:
Ride Safe,
Fired00d
:fireman:
I appreciate it d00d! Just in time too! Thanks man! :2vrolijk_21: Hoist! 8)
-
Uh oh! :nixweiss: I gotta start reading this stuff better. The Feuling site states that their Cam Plate is "For use ONLY with the Feuling oil pumps". :nixweiss: Now what's up with that? Got some more checking to do now! ;)
My supplier is checking on this right now. It appears I'll be using the Feuling oil pump also now! ::) Hoist!
Hoist! 8)
-
Uh oh! :nixweiss: I gotta start reading this stuff better. The Feuling site states that their Cam Plate is "For use ONLY with the Feuling oil pumps". :nixweiss: Now what's up with that? Got some more checking to do now! ;)
My supplier is checking on this right now. It appears I'll be using the Feuling oil pump also now! ::) Hoist!
Hoist! 8)
Nothing wrong w/their oil pump. I'm using it and compared to the stock low/no oil pressure at idle I'm really happy w/it.
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Nothing wrong w/their oil pump. I'm using it and compared to the stock low/no oil pressure at idle I'm really happy w/it.
:pumpkin:
Ride Safe,
Fired00d
:fireman:
I hear it's an excellent pump. I just didn't need to go for the extra $400 since the '07 pumps had been upgraded from previous years. But being bulletproof is part of my goal, this will help toward that end anyway! Looks like I'll use their oil pump, cam plate, relief spring and hardware now! ;) Hoist! 8)
-
I hear it's an excellent pump. I just didn't need to go for the extra $400 since the '07 pumps had been upgraded from previous years. But being bulletproof is part of my goal, this will help toward that end anyway! Looks like I'll use their oil pump, cam plate, relief spring and hardware now! ;) Hoist! 8)
As Harry (Unbalanced) would say.... Just another day at the spa for Binx. :huepfenlol2:
:pumpkin:
Ride Safe,
Fired00d
:fireman: