Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[East Coast]

Does anyone have the part numbers for the passenger floorboard set up on a 15 CVO SG? I'm looking to match the rider floorboards. I know I'll need left and right pans, inserts and mounts, anything else? I found a thread from back in March, not sure it was I'm looking for?

I wasnt looking for anything adjustable as far as the mount goes but if you have it and the BSR likes it please let me know.

Thanks, Erich

[dooinit2u]

I did the mod with full pass boards, I'd have to dig out the receipt. I'll look and get part #s.

The mounts were factory chrome from HD (non CVO mounts) but I also installed the adjustable"slut pegs" for the BSR..

[skratch]

you can find just about any oem part number you need here:  http://www.granitestateharleystore.com/OEMpartfinder.htm

these screen cuts are from the 2015 cvo parts, should be what you need.

[skratch]

and the part numbers.....

[East Coast]

Thank you fella's. I'm looking for the passenger boards, i'll take a look at the link.

Unfortunately the link does not have a listing for the passenger floorboard inserts and pans, it just shows the stock passenger peg set up.

Thanks again Skratch. 

[lcloud]

     If you use that same link & look at either a cvo road glide ultra or limited , it would have the part numbers you would be looking for.
     Hope this helps.

[skratch]

Thank you fella's. I'm looking for the passenger boards, i'll take a look at the link.

Unfortunately the link does not have a listing for the passenger floorboard inserts and pans, it just shows the stock passenger peg set up.

Thanks again Skratch.

sorry, misunderstood your post.  the link i provided will give you part numbers for oem stuff.  when i read your post, i thought you were looking for the oem setup.  if it wasn't that way from the factory, then you have to look a little harder.  if another model came stock the way you wanted, then you would look up that model and get the part numbers that way.  otherwise, if its p&a parts, then it's h-d website, p&a catalogs, etc. for your part numbers.

[East Coast]

No worries, all good and thanks again for the link. As Icloud suggested (great idea) I'll use it to look up the stock passenger boards on a CVO RG or Ultra which is what I'm after.

Have a great weekend gents!

[East Coast]

Does anyone know if the ball, spring and pins are included with the pans or mounts or ordered separately?

[lrubio]

Does anyone know if the ball, spring and pins are included with the pans or mounts or ordered separately?

I added the passenger footboards and learned the pins, springs and ball bearing are separate. I had spares from my Road King replacement that fit perfectly.

[CVOSGJoe]

HOUSING,RH-FOOTBOARD,PSNGR             50500377   1      $54.00   $54.00
KIT-SUPPORT,PSNGR,ADJ-FTBRD,CHRM/FLT     50768-07A   1      $304.00   $304.00
INSERT ASY,RH-FOOTBOARD,PSNGR             50500378   1      $60.00   $60.00
INSERT ASY,LH-FOOTBOARD,PSNGR             50500384   1      $60.00   $60.00
HOUSING,LH-FOOTBOARD,PSNGR             50500383   1      $54.00   $54.00

I did not purchase the spring and Ball seperate

Here is the list I purchased from Kutterharleyonline.com

[East Coast]

Thank you all for your replies!!

I was going to purchase the chrome straight mount vs the adjustable, is the adjustable mount really worth the extra money?

[chadstang68]

Pivot pin set is 50938-04

[chadstang68]

This is what u end up with

[chadstang68]

If you are short legged get the longer crash bar mounts instead, would have to look up that part number if u needed it. And FYI new Castle harley davidson has best prices I have found for online ordering