Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[madmax2027]

So it seems that the popular vote is on the Yaffe, but I'm still wondering, does the Kury curved frame fit the 15 CVO street glide, or not??

[CVOStreetglide]

The short answer is YES.

The part numbers are:

KURY Tag Bracket Back   #3146     $49.99
KURY LED Frame            #3144     $69.99 

I have had and personally installed both over the yers on my CVO Street Glides.

The Kury is easier to install and easier to replace the hard tag.

The look is of course a personal thing. 

Paul hasn't redesigned the small screws used to hold the backing plate and tag to the frame and I am not sure but the earlier versions had SOME issues with the LED strip that lights the tag. Yaffee wasn't help with a fix if they were out of warranty.

JSwerve can provide more accurate and first hand experience on the old and new Yaffee when he sees your post.

Regards

Jerry

[madmax2027]

Thank you for your reply Jerry. Ironically, I had a chrome Kury on my '14 SG, that I was going to put on my new CVO, but decided I wanted black instead. So, I actually called Kuryakyn first before spending the money, and spoke to their "tech" advisor. He told me they didn't make one for the new '15 CVO streetglide yet, and that my chrome one wouldn't have fit anyway. I thanked him for saving me the money, and that was that.
  So, when I started following this topic, I was obviously confused with some people saying that they think Kury will work. Anyone actually have it with a picture or two?? Does it just bolt on, because it didn't look like it would to me when I looked at it briefly. Pics and mounting info please, if anyone actually has just the basic Kury curved plate frame. Thank you!

[CVOStreetglide]

Thank you for your reply Jerry. Ironically, I had a chrome Kury on my '14 SG, that I was going to put on my new CVO, but decided I wanted black instead. So, I actually called Kuryakyn first before spending the money, and spoke to their "tech" advisor. He told me they didn't make one for the new '15 CVO streetglide yet, and that my chrome one wouldn't have fit anyway. I thanked him for saving me the money, and that was that.
  So, when I started following this topic, I was obviously confused with some people saying that they think Kury will work. Anyone actually have it with a picture or two?? Does it just bolt on, because it didn't look like it would to me when I looked at it briefly. Pics and mounting info please, if anyone actually has just the basic Kury curved plate frame. Thank you!

FIRST-- The Kury that would work for a standard Street Glide is not the same as the one for the CVO Street Glide.

The parts numbers I gave you are the ones for a CVO. Go on the Kury site and you can print out the install instructions. Use the above part numbers. 

BTW: Carefully consider the placement of your tag renewal sticker for either the Kury or Yaffee.

Regards

Jerry

[madmax2027]

Thanks again Jerry, I really appreciate it!!

[VANAMAL]

I havnt found one kury product that id put on my bikes. The yaffe painted to match looks great. Billet boys had some nice frames too but not not sure on fit

[Cross threaded]

I have the Yaffe Originals CVO Stealth III Plate Cover on my 15 Hard Candy SESG and think the plate looks amazing.. I can't see going back to stock or ever fell the need to but another brand on the bike.

Yaffe Originals CVO Stealth III Plate Cover!!!!!!!!!!!!!!!

[SDCVO]

Joe just let me know today he just finished painting my Yaffee for my 12 RG. Looking forward to getting it on

[Jswerve]

Installed the Yaffe Stealth III today. Had to reverse the wiring, a bit of a pain to line up the bolts through the mounting bracket, fender, and p,ate cover. Attaching the sticker to the plate each year will be a chore. Loving the looks of it though!

Haha the people that make these for Yaffee must be complete morons. 2 wires and they still screw it up. I had to reverse mine too. Brady at Yaffee is top notch though and I love the new led strip vs the old style. I don't mind pulling it off once a year for the tag takes about 20 mins and it's the best looking plate holder out there IMO.

Sent from my SM-G900R4 using Tapatalk