Topic: I ordered a Klockwerks Slicer for Joe at Xtreme Dimension to paint! (Read 24105 times)

Nicky Pass · « **on:** January 27, 2016, 01:06:13 PM »

After pondering for a while, I decided to get in touch with Joe at Xtreme Demension and have him paint a Klockwerks Slicer front fender for me. I've seen pics of his work and he gets great reviews, so I'm excited to see how it turns out. Now I just have to wait about a month!

smkymtnboy · « **Reply #1 on:** January 27, 2016, 02:30:41 PM »

hey nicky!! what are you putting the fender on?

Nicky Pass · « **Reply #2 on:** January 27, 2016, 03:22:36 PM »

I'm going with the slicer on my 15 Hard Candy Mercury. I was going to go with the level, but after looking at pics, I wanna see the whole wheel!

CVOSGJoe · « **Reply #3 on:** January 27, 2016, 04:14:20 PM »

I hope to see a pic... I had the same idea going on.
Where are you located that you chose XTreme ??

smkymtnboy · « **Reply #4 on:** January 27, 2016, 05:00:02 PM »

yes, please post some photos. maybe, my sesg h.c. mercury could undergo a little fender work!

Nicky Pass · « **Reply #5 on:** January 27, 2016, 06:04:32 PM »

Quote from: CVOSGJoe on January 27, 2016, 04:14:20 PM

I hope to see a pic... I had the same idea going on.
Where are you located that you chose XTreme ??

I'm in Chicago....but after seeing his work from the site, and after talking with him.....I feel 110% confident it's going to tun out awesome.

Nicky Pass · « **Reply #6 on:** January 27, 2016, 06:08:12 PM »

Check this thread out!
http://www.cvoharley.com/smf/index.php?topic=85822.405

Cat Eye · « **Reply #7 on:** January 28, 2016, 06:24:15 PM »

X2 on Joe.

Shay-D Glider · « **Reply #8 on:** January 29, 2016, 04:14:20 PM »

Nicky, you won't be disappointed. That was my chopped tour pack in the thread above. I also had him paint my docking hardware and speaker grilles to match. It all came out great, plus you won't meet a guy who cares about his work more than Joe does.I can't wait to see your fender on the bike when it's done.

Nicky Pass · « **Reply #9 on:** January 29, 2016, 04:41:27 PM »

Quote from: Shay-D Glider on January 29, 2016, 04:14:20 PM

Nicky, you won't be disappointed. That was my chopped tour pack in the thread above. I also had him paint my docking hardware and speaker grilles to match. It all came out great, plus you won't meet a guy who cares about his work more than Joe does.I can't wait to see your fender on the bike when it's done.

Reviews like yours are why I chose him. I've never talked to him before and it seemed like we were friends!

skratch · « **Reply #10 on:** January 29, 2016, 06:25:58 PM »

Quote from: CVOSGJoe on January 27, 2016, 04:14:20 PM

I hope to see a pic... I had the same idea going on.
Where are you located that you chose XTreme ??

I chose extreme because of positive reviews from this site as well. i'm in la. it was easy enough to deal with shipping lowers, and a front fender.....

SDCVO · « **Reply #11 on:** January 30, 2016, 12:04:51 AM »

I am in San Diego and I send my "stuff" to Joe. Amazing work..

Nicky Pass · « **Reply #12 on:** January 30, 2016, 02:15:07 PM »

Quote from: SDCVO on January 30, 2016, 12:04:51 AM

I am in San Diego and I send my "stuff" to Joe. Amazing work..

Your heat deflectors turned out awesome!

SDCVO · « **Reply #13 on:** January 30, 2016, 09:58:29 PM »

Quote from: Nicky Pass on January 30, 2016, 02:15:07 PM

Your heat deflectors turned out awesome!

And they have held up perfectly

toddwebber · « **Reply #14 on:** February 02, 2016, 11:23:48 PM »

Funny...I was just looking into doing the exact same thing

Nicky Pass · « **Reply #15 on:** February 03, 2016, 05:26:58 PM »

Quote from: toddwebber on February 02, 2016, 11:23:48 PM

Funny...I was just looking into doing the exact same thing

It's been a week and a half....I'm anxious, but I don't want to rush him. Not to mention....it's FREEKIN winter in Chicago!

mjb765 · « **Reply #16 on:** February 03, 2016, 06:27:49 PM »

I am ordering a slicer from Joe as well.....along with color matching a few little items.

mikester · « **Reply #17 on:** February 03, 2016, 06:38:32 PM »

I ordered a slicer on dec 30 for my 12 diamond slate he told me yesterday still 2 in front of me so have to be patient

Nicky Pass · « **Reply #18 on:** February 03, 2016, 09:17:58 PM »

Quote from: mikester on February 03, 2016, 06:38:32 PM

I ordered a slicer on dec 30 for my 12 diamond slate he told me yesterday still 2 in front of me so have to be patient

He said it would be a month. I ordered it January 25th, so it should be February 25-ish.....23-ish days to go.

toddwebber · « **Reply #19 on:** February 03, 2016, 09:24:53 PM »

Hate the wait. Fuel Moto had my bike for over 5 weeks. Did you have to send your stock fender to him for matching?

Nicky Pass · « **Reply #20 on:** February 03, 2016, 10:10:30 PM »

Quote from: toddwebber on February 03, 2016, 09:24:53 PM

Hate the wait. Fuel Moto had my bike for over 5 weeks. Did you have to send your stock fender to him for matching?

No, he's done a bunch of hard candy mercury work, so there was no need. He said I could send the side cover if I wanted, but I didn't want to risk it getting messed up or lost.

toddwebber · « **Reply #21 on:** February 03, 2016, 10:14:44 PM »

Sweet...So I can ride while I wait. Thats not so bad then. How much is this costing you for the fender and paint? Did he have that fender or did you get it from Klockworks?

Nicky Pass · « **Reply #22 on:** February 03, 2016, 10:19:41 PM »

Quote from: toddwebber on February 03, 2016, 10:14:44 PM

Sweet...So I can ride while I wait. Thats not so bad then. How much is this costing you for the fender and paint? Did he have that fender or did you get it from Klockworks?

He got the fender...it was $950.

toddwebber · « **Reply #23 on:** February 03, 2016, 10:27:05 PM »

Less than I thought it would be. I will give him a call. Thanks

Nicky Pass · « **Reply #24 on:** March 09, 2016, 07:18:01 PM »

At the end of January, I decided that I wants to make my scoot a little different then other 2015 Hard Candy Mercury CVO Street Glides, so i pImgot in touch with Joe at Xtreme Dimensions and got the ball rolling. Well after going over flame layout and a forum member dropping a side cover off (I'm in Chicago and they are in NJ), I finally got a progress pic....I will post more as I get them.

Nicky Pass · « **Reply #25 on:** March 11, 2016, 05:38:39 AM »

Quote from: mjb765 on February 03, 2016, 06:27:49 PM

I am ordering a slicer from Joe as well.....along with color matching a few little items.

The other fender in the pics is yours I think. Joe said it was for an ultraviolet bike.

mjb765 · « **Reply #26 on:** March 11, 2016, 11:25:31 AM »

Quote from: Nicky Pass on March 11, 2016, 05:38:39 AM

The other fender in the pics is yours I think. Joe said it was for an ultraviolet bike.

Now that is good to hear. I spoke with him earlier this week and he said he would be starting mine so you are probably correct (I hope!)

With any luck I will see it by the end of next week.

Nicky Pass · « **Reply #27 on:** March 11, 2016, 01:12:57 PM »

He said there was more steps in yours, but he was gonna do mine next.

Nicky Pass · « **Reply #28 on:** March 11, 2016, 07:19:08 PM »

Here is the flame pattern we came up with. It will be final taped with better tape for a smoother lines.....

mjb765 · « **Reply #29 on:** March 11, 2016, 09:35:33 PM »

Quote from: Nicky Pass on March 11, 2016, 01:12:57 PM

He said there was more steps in yours, but he was gonna do mine next.

You ordered first....

Nicky Pass · « **Reply #30 on:** March 11, 2016, 10:04:43 PM »

Quote from: mjb765 on March 11, 2016, 09:35:33 PM

You ordered first....

Ehhhhhh, one day more, one day less....as long as I get it in about 2 weeks, I'll be happy.

mrambo4 · « **Reply #31 on:** March 11, 2016, 11:57:45 PM »

mjb765 please post pictures on this link when you get the fender installed, I have been thinking about doing something simular.

mjb765 · « **Reply #32 on:** March 18, 2016, 08:48:45 PM »

Quote from: Nicky Pass on March 11, 2016, 10:04:43 PM

Ehhhhhh, one day more, one day less....as long as I get it in about 2 weeks, I'll be happy.

Hear anything yet Nicky?

Nicky Pass · « **Reply #33 on:** March 20, 2016, 10:28:04 PM »

Nope...I'm gonna call tomorrow. I told him I'd rather give him another week and have it be perfect...rather then have him rush it!

mjb765 · « **Reply #34 on:** March 21, 2016, 12:01:35 PM »

Quote from: Nicky Pass on March 20, 2016, 10:28:04 PM

Nope...I'm gonna call tomorrow. I told him I'd rather give him another week and have it be perfect...rather then have him rush it!

Just texted him and he told me a few more days

Nicky Pass · « **Reply #35 on:** March 23, 2016, 05:34:47 PM »

He sent me a pic....your fender and mine are in the booth it looks like....there are 2 helmets with them.

Nicky Pass · « **Reply #36 on:** March 25, 2016, 07:50:37 PM »

Another week has gone by....I'm getting anxious!

mjb765 · « **Reply #37 on:** March 26, 2016, 08:33:12 AM »

Quote from: Nicky Pass on March 25, 2016, 07:50:37 PM

Another week has gone by....I'm getting anxious!

Me too!!

jr1000yarder · « **Reply #38 on:** March 27, 2016, 08:54:40 PM »

Thought it was only going to be a month......I'm still waiting also since January 1st to be exact

mjb765 · « **Reply #39 on:** March 28, 2016, 07:09:35 AM »

Quote from: jr1000yarder on March 27, 2016, 08:54:40 PM

Thought it was only going to be a month......I'm still waiting also since January 1st to be exact

That does not sound good....he told me a few more days last week and I ordered first week in Feb

J Heinlein · « **Reply #40 on:** March 28, 2016, 11:13:11 AM »

Here's the deal with Joe guys. Very popular man who does High Quality Work as we all know. Jump on the waiting list and hang on for a long ride. I have been waiting since Nov on Parts and I had expected this all along. Again, what we want is Perfection and with the amount of clients he has, well you do the math. When it is all said and done time is just that. Riding around on a custom bike that we all have a vision of in our own minds is worth the wait in my mine. Joe is a Great Guy who deliveries the Goods !! You can see by all the referrals. He's worth the wait.

mjb765 · « **Reply #41 on:** March 28, 2016, 05:06:45 PM »

Quote from: J Heinlein on March 28, 2016, 11:13:11 AM

Here's the deal with Joe guys. Very popular man who does High Quality Work as we all know. Jump on the waiting list and hang on for a long ride. I have been waiting since Nov on Parts and I had expected this all along. Again, what we want is Perfection and with the amount of clients he has, well you do the math. When it is all said and done time is just that. Riding around on a custom bike that we all have a vision of in our own minds is worth the wait in my mine. Joe is a Great Guy who deliveries the Goods !! You can see by all the referrals. He's worth the wait.

I'm fine with the wait...good work can't be rushed....just wish I would have known so I would not have sent him my air cleaner......

Nicky Pass · « **Reply #42 on:** March 28, 2016, 10:30:20 PM »

I get it, my only issue is more of an information thing. If you tell someone one month, then it becomes double that....and longer, a person might get anxious. I hope it's perfect!

mjb765 · « **Reply #43 on:** March 29, 2016, 08:14:36 PM »

Got these yesterday

mjb765 · « **Reply #44 on:** March 29, 2016, 08:15:01 PM »

and then this....He said the metal flake will show up and match better after the clear.

Nicky Pass · « **Reply #45 on:** March 29, 2016, 09:07:50 PM »

You have some progress atleast! I'm banking on it being another month before I get it. I'm going to get air ride installed in the next couple of weeks....id love to have it by then!

J Heinlein · « **Reply #46 on:** March 30, 2016, 11:10:19 AM »

Mjb765, please post some pics of the fender once you have it installed. I have the same color bike and would love to see the finished product. Hopefully Joe is running the parts at the same time with the colors matching and I will get my Goodies as well.

J Heinlein · « **Reply #47 on:** March 30, 2016, 11:20:57 AM »

Mjb765, I just looked at your pic again and had to laugh. I am positive that the side panel in the pic with your fender is mine that I sent over to Joe for color matching. Could be wrong but very interesting.

Nicky Pass · « **Reply #48 on:** March 30, 2016, 11:51:42 AM »

Quote from: J Heinlein on March 30, 2016, 11:10:19 AM

Mjb765, please post some pics of the fender once you have it installed. I have the same color bike and would love to see the finished product. Hopefully Joe is running the parts at the same time with the colors matching and I will get my Goodies as well.

The last pic he sent me had a helmet in it....

mjb765 · « **Reply #49 on:** March 30, 2016, 12:44:35 PM »

Quote from: J Heinlein on March 30, 2016, 11:20:57 AM

Mjb765, I just looked at your pic again and had to laugh. I am positive that the side panel in the pic with your fender is mine that I sent over to Joe for color matching. Could be wrong but very interesting.

Could be....I didn't send any of my side covers.

Nicky Pass · « **Reply #50 on:** March 31, 2016, 06:50:03 AM »

He told me he was down a guy and that I should have by the end of next week.

Nicky Pass · « **Reply #51 on:** April 06, 2016, 09:03:08 AM »

It's almost done!

HighOnHD · « **Reply #52 on:** April 06, 2016, 11:26:10 PM »

That's going to look nice Nicky! He was able to pull of the 3D effect on the flames. Great job!

jc15025 · « **Reply #53 on:** April 08, 2016, 08:18:06 AM »

AWESOME!

Quote from: Nicky Pass on April 06, 2016, 09:03:08 AM

It's almost done!

cyco1450 · « **Reply #54 on:** April 10, 2016, 08:19:20 PM »

Get the slicer yet?

Nicky Pass · « **Reply #55 on:** April 10, 2016, 08:56:34 PM »

I have to call tomorrow with final payment and he will ship it....I should see it by the end of the week!

Cyco1450.....you have the MRI electric center stand with cross under exhaust!? Did you alter the exhaust at all? How does it work?

mjb765 · « **Reply #56 on:** April 10, 2016, 09:12:00 PM »

Quote from: Nicky Pass on April 10, 2016, 08:56:34 PM

I have to call tomorrow with final payment and he will ship it....I should see it by the end of the week!

Cyco1450.....you have the MRI electric center stand with cross under exhaust!? Did you alter the exhaust at all? How does it work?

Then comes mine!!

Nicky Pass · « **Reply #57 on:** April 11, 2016, 05:12:49 PM »

He nailed it!

Nicky Pass · « **Reply #58 on:** April 11, 2016, 05:13:43 PM »

Another...

Nicky Pass · « **Reply #59 on:** April 11, 2016, 05:16:33 PM »

Another....

HighOnHD · « **Reply #60 on:** April 11, 2016, 10:13:28 PM »

Nice! Looking forward to seeing it on your bike.

cyco1450 · « **Reply #61 on:** April 12, 2016, 09:13:36 PM »

Quote from: Nicky Pass on April 10, 2016, 08:56:34 PM

I have to call tomorrow with final payment and he will ship it....I should see it by the end of the week!

Cyco1450.....you have the MRI electric center stand with cross under exhaust!? Did you alter the exhaust at all? How does it work?

Yes it works with the crossover exhaust. Actually Puzzled is who I bought it from and he installed it for me. He's a distributor. I love it.

CVOSGJoe · « **Reply #62 on:** April 13, 2016, 10:04:40 AM »

I believe I read somewhere that the MRI center stand only works with True Dual Cross Over Exhaust, and looking at your pics and see you have a True Dual exhaust this might be correct!

Cyco1450.....you have the MRI electric center stand with cross under exhaust!? Did you alter the exhaust at all? How does it work?

Quote from: cyco1450 on April 12, 2016, 09:13:36 PM

Yes it works with the crossover exhaust. Actually Puzzled is who I bought it from and he installed it for me. He's a distributor. I love it.

Nicky Pass · « **Reply #63 on:** April 14, 2016, 06:10:44 AM »

When they say true duals, they mean when 1 pipe goes down each side of the bike....eliminating the cross under.

CVOSGJoe · « **Reply #64 on:** April 14, 2016, 10:34:04 AM »

Look at cyco1450 pics of his exhaust, it is not running each side of the bike, it however has a different Tru Dual head pipe most likely pushing the cross pipe back toward the rear wheel more allowing the center stand to retract.
From MRI web site:
ELECTRIC CENTER STAND
All MRI Electric Center Stands have been redesigned to make fitment for all customers a breeze. No more measuring is needed!
A. 2006 and Earlier
B. 2007 and 2008
NOTE: Models with Legend Air Ride: The compressor unit will need to be moved from under the bike and relocated
C. 2009 and Later:
NOTE: Does NOT work with cross under exhaust; Drag Specialties offers header kits that will convert an 09L OEM Cross Under Exhaust to work with our electric center stand. They can be found on page 470 of the 2015 Fatbook.

Quote from: Nicky Pass on April 14, 2016, 06:10:44 AM

When they say true duals, they mean when 1 pipe goes down each side of the bike....eliminating the cross under.

Nicky Pass · « **Reply #65 on:** April 15, 2016, 05:27:59 PM »

You can run it with a cross under system, it just going to hang down a little....the disclaimer is probably to save MRI from any lawsuits.

Nicky Pass · « **Reply #66 on:** April 18, 2016, 01:46:03 PM »

He nailed it!

Nicky Pass · « **Reply #67 on:** April 18, 2016, 01:47:04 PM »

Another picture.....

Nicky Pass · « **Reply #68 on:** April 18, 2016, 01:48:01 PM »

Nice undercoating too....

mjb765 · « **Reply #69 on:** April 25, 2016, 07:36:57 PM »

We have progress!!

mjb765 · « **Reply #70 on:** April 25, 2016, 07:37:24 PM »

and more

mjb765 · « **Reply #71 on:** April 25, 2016, 07:38:20 PM »

Last one

jc15025 · « **Reply #72 on:** April 26, 2016, 06:10:53 AM »

Unbelievable work!

Quote from: Nicky Pass on April 18, 2016, 01:47:04 PM

Another picture.....

Nicky Pass · « **Reply #73 on:** April 26, 2016, 12:58:36 PM »

Lookin going good mjb!

I'm getting some mods done to my bike...I'm dropping it off sometime this week for apes and fender install! Waiting is the hardest part!

cyco1450 · « **Reply #74 on:** April 28, 2016, 10:19:12 PM »

Quote from: CVOSGJoe on April 13, 2016, 10:04:40 AM

I believe I read somewhere that the MRI center stand only works with True Dual Cross Over Exhaust, and looking at your pics and see you have a True Dual exhaust this might be correct!

Cyco1450.....you have the MRI electric center stand with cross under exhaust!? Did you alter the exhaust at all? How does it work?

I run an S&S True Dual head pipe. Puzzled did the install but no mods were done. I'm running a Legend's rear suspension.

mjb765 · « **Reply #75 on:** April 30, 2016, 04:52:56 PM »

Installed!

mjb765 · « **Reply #76 on:** April 30, 2016, 04:53:31 PM »

Another...........and before someone says it....I did secure the clutch line after the pic was taken!!

Nicky Pass · « **Reply #77 on:** April 30, 2016, 05:19:35 PM »

Looks AWESOME!

Mine is going on this week....every time I want to take it to get it done it FREEKIN rains!

Can you post pics of the mounting area with the spacers?

mjb765 · « **Reply #78 on:** May 01, 2016, 07:06:47 PM »

Spacer between fender and fork legs. Fender bolts to spacer and spacer bolts to legs. Now that I look at it I am thinking chrome hardware on the inside bolts also. Or maybe just the lockwasher.....but the Klockwerks instructions say lockwasher and regular washer....and maybe a button head allen instead since you can get to in through the wheel from the other side.

cyco1450 · « **Reply #79 on:** May 01, 2016, 10:01:07 PM »

Klockwerks makes quality stuff. Only problem is, now you're gonna want to do a 23! Happened to me....

mjb765 · « **Reply #80 on:** May 02, 2016, 08:37:21 AM »

Quote from: cyco1450 on May 01, 2016, 10:01:07 PM

Klockwerks makes quality stuff. Only problem is, now you're gonna want to do a 23! Happened to me....

Don't think I am going that route.....Doesn't it take bumps harder with a 23"?

Nicky Pass · « **Reply #81 on:** May 02, 2016, 09:08:53 PM »

I dropped my bike off this afternoon for Legend Air Ride, Yaffe 10" Monkey Bars and my fender installed. I should get it back in a week to a week and a half.....so, again I wait!

mjb765 · « **Reply #82 on:** May 02, 2016, 09:12:08 PM »

Quote from: Nicky Pass on May 02, 2016, 09:08:53 PM

I dropped my bike off this afternoon for Legend Air Ride, Yaffe 10" Monkey Bars and my fender installed. I should get it back in a week to a week and a half.....so, again I wait!

Now I am just waiting for the rain to end........forecast says on and off for the next few days. Maybe I can ride Saturday.

Nicky Pass · « **Reply #83 on:** May 04, 2016, 07:32:14 PM »

Quote from: mjb765 on May 02, 2016, 09:12:08 PM

Now I am just waiting for the rain to end........forecast says on and off for the next few days. Maybe I can ride Saturday.

It's been cold and raining in Chicago! I have a party in Saturday and Mothers Day is Sunday...and I've been working 10 hour days at work. DD Customs is doin pg the work on my bike, but he said it will take 2 weeks....so that means a week from Saturday. I'm excited for all of the stuff to get done, but I don't want to rush him at all.

mjb765 · « **Reply #84 on:** May 04, 2016, 08:58:30 PM »

2 weeks!!! The bars take a few hours, the fender is easy......how long can the air ride take??

cyco1450 · « **Reply #85 on:** May 04, 2016, 10:24:49 PM »

Quote from: mjb765 on May 04, 2016, 08:58:30 PM

2 weeks!!! The bars take a few hours, the fender is easy......how long can the air ride take??

Air ride is pretty easy. I'm no mechanic and I installed a Legend kit on 2 of my bikes...

LovemyCVOgirl · « **Reply #86 on:** May 05, 2016, 12:55:36 AM »

Quote from: Nicky Pass on April 30, 2016, 05:19:35 PM

Looks AWESOME!

Mine is going on this week....every time I want to take it to get it done it FREEKIN rains!

Can you post pics of the mounting area with the spacers?

Looks great Mike!

Nicky Pass · « **Reply #87 on:** May 05, 2016, 12:57:32 PM »

Quote from: mjb765 on May 04, 2016, 08:58:30 PM

2 weeks!!! The bars take a few hours, the fender is easy......how long can the air ride take??

He has 3 full builds going on and he had to order the air tank the mounts to the bag rail and valve bodies from Dirty Air and the Shocks from Legend. He said to be safe, May 14th.

trwtow · « **Reply #88 on:** May 06, 2016, 07:10:10 PM »

Quote from: mjb765 on May 01, 2016, 07:06:47 PM

Spacer between fender and fork legs. Fender bolts to spacer and spacer bolts to legs. Now that I look at it I am thinking chrome hardware on the inside bolts also. Or maybe just the lockwasher.....but the Klockwerks instructions say lockwasher and regular washer....and maybe a button head allen instead since you can get to in through the wheel from the other side.

very sharp

that's the stock size rim and tire right

aclass · « **Reply #89 on:** May 06, 2016, 07:34:58 PM »

I like it! nicely done mjb

mjb765 · « **Reply #90 on:** May 06, 2016, 10:51:17 PM »

Quote from: trwtow on May 06, 2016, 07:10:10 PM

very sharp that's the stock size rim and tire right

Yes

Nicky Pass · « **Reply #91 on:** May 13, 2016, 03:13:19 AM »

Pic installed! I should pick it up soon!

D-N-D · « **Reply #92 on:** May 13, 2016, 06:54:19 AM »

That's Sweet Brother !!!

Dante

mjb765 · « **Reply #93 on:** May 13, 2016, 07:26:38 AM »

Quote from: Nicky Pass on May 13, 2016, 03:13:19 AM

Pic installed! I should pick it up soon!

Looks good!!

Nicky Pass · « **Reply #94 on:** May 13, 2016, 11:39:53 AM »

Apes...

Nicky Pass · « **Reply #95 on:** May 13, 2016, 11:42:04 AM »

Start of the Legend air ride with the Dirty Air tank for fast rear air ride...

cvoMD · « **Reply #96 on:** May 13, 2016, 03:55:38 PM »

Looks good cant wait for him to finish mine

Sent from my SM-G925P using Tapatalk

Nicky Pass · « **Reply #97 on:** May 13, 2016, 05:10:38 PM »

All set....
I think I'm gonna pick it up tomorrow....

Shay-D Glider · « **Reply #98 on:** May 16, 2016, 06:57:56 AM »

Your mods look great Nicky, especially the slicer fender! Joe did a great job, as usual.

Nicky Pass · « **Reply #99 on:** May 16, 2016, 10:07:55 AM »

Quote from: Shay-D Glider on May 16, 2016, 06:57:56 AM

Your mods look great Nicky, especially the slicer fender! Joe did a great job, as usual.

Thanks again for your help in a pinch!

Shay-D Glider · « **Reply #100 on:** May 16, 2016, 12:50:33 PM »

Happy to help.

FAST380 · « **Reply #101 on:** July 25, 2016, 01:40:39 PM »

The fenders look awesome!! Can you give a ballpark price for the fender and paint? I know it needs to be quoted by the painter, but a ballpark would be nice.

Thanks

Author Topic: I ordered a Klockwerks Slicer for Joe at Xtreme Dimension to paint! (Read 24105 times)