Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2] 3 4  All

Author Topic: License Frame for '15  (Read 18527 times)

0 Members and 1 Guest are viewing this topic.

CVOStreetglide

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1239

    • CVO1: 2015 CVO Street Glide
    • CVO2: 2012 CVO Street Glide (Sold)
    • CVO3: 2010 CVO Street Glide (Sold) CVO4: 2006 VRXSE DESTROYER (Sold)
Re: License Frame for '15
« Reply #15 on: October 23, 2014, 07:45:48 PM »

The Kury works on the 2015. I aready put one on the wife new bike. No different than the previous years.

 Plus 1 :2vrolijk_21:
Logged

East Coast

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 700
    • NY


    • CVO1: 2011 FLHXSE2 Black Diamond/Crimson - SOLD
    • CVO2: 2015 FLHXSE Hard Candy / Smokey Quartz - SOLD
    • CVO3: 2024 FLTRXSTSE Golden White Pearl
Re: License Frame for '15
« Reply #16 on: October 23, 2014, 08:58:17 PM »

No I took the plate off my 2011 street glide (black diamond with Crimson). And put it right on the new one  with no problems.   the plate was offset a little so I drilled the fastner not the fender where the screws  line up.  The plate fit perfect!!!!   I'm going to take it off and paint it the same color of the bike

Thanks Joker.....  :2vrolijk_21:
Logged

Joker2249

  • Newbie
  • *
  • Offline Offline
  • Posts: 12
  • Fidelis Ad Mortem
    • NY


    • CVO1: 2015 Street Glide
    • CVO2: 2011 Street Glide (sold)
Re: License Frame for '15
« Reply #17 on: October 23, 2014, 09:21:30 PM »

No problem brother be safe!!!
Logged

EAGLE1

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1488
    • FL


    • CVO1: 2015 FLHXSE CVO Street Glide "Silvia"
    • CVO2: 2006 FLSTFSE² Screamin’ Eagle® Fat Boy® (SOLD)
Re: License Frame for '15
« Reply #18 on: October 23, 2014, 11:13:26 PM »

removed that big black wart off of Silvia's a$$  :)

The Yaffe looks great just got done installing it, but on a scale of 1-10 for being a frickin Pain In The A$$ to install this bitch gets an 11  :huepfenlol2:

you have to remove the oem inner support which is fastened with double stick tape and drill out the tapped hole to allow for the new bolts, you have to cut the wires on the supplied plug and reverse them to get the led's to work, and you have to either cut the corner of your plate or feed the newly spliced wires through the top right license plate hole so you don't pinch the wires when you sandwich it all together and screw in the 10 tiny little fricken screws that hold it all together, don't plan on taking that off any time soon, time for a BEER  :drink: or two  :drink: :drink: or three  :drink: :drink: :drink:
« Last Edit: October 24, 2014, 12:03:56 AM by EAGLE1 »
Logged
Toes in the water, ass in the sand

Jswerve

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4149

    • CVO1: 2012 FLHXSE3
Re: License Frame for '15
« Reply #19 on: October 24, 2014, 12:21:46 AM »

Pia to install for sure. My left led light burned out already after about 15 months.
Logged


2012 FLHXSE3 Ruby Red/Typhoon Maroon
|Color Matched Detachable Tour Pak | Fuelmoto PV | Dragos 580 cams | Dragula 2-1/Ghost Pipe | Cyclesmith 13's | Sachs heads | Yaffe Stealth III License Plate Frame| Long Angled High

D-N-D

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6711
  • FLHRSEI.ORG
    • PA


    • CVO1: 2020 FLHTKSE Limited / Moonlight Blue & Deep Sea Blue
Re: License Frame for '15
« Reply #20 on: October 24, 2014, 06:03:54 AM »

Looks Great Brother !!!
Logged
DND

EAGLE1

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1488
    • FL


    • CVO1: 2015 FLHXSE CVO Street Glide "Silvia"
    • CVO2: 2006 FLSTFSE² Screamin’ Eagle® Fat Boy® (SOLD)
Re: License Frame for '15
« Reply #21 on: October 24, 2014, 08:45:14 AM »

Pia to install for sure. My left led light burned out already after about 15 months.

did you ask if they will replace it, didn't even look to see if there a warrantee
Logged
Toes in the water, ass in the sand

Jswerve

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4149

    • CVO1: 2012 FLHXSE3
Re: License Frame for '15
« Reply #22 on: October 24, 2014, 08:52:54 AM »

did you ask if they will replace it, didn't even look to see if there a warrantee

I have no idea. My guess is it is 12 months.  :nixweiss:
Logged


2012 FLHXSE3 Ruby Red/Typhoon Maroon
|Color Matched Detachable Tour Pak | Fuelmoto PV | Dragos 580 cams | Dragula 2-1/Ghost Pipe | Cyclesmith 13's | Sachs heads | Yaffe Stealth III License Plate Frame| Long Angled High

East Coast

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 700
    • NY


    • CVO1: 2011 FLHXSE2 Black Diamond/Crimson - SOLD
    • CVO2: 2015 FLHXSE Hard Candy / Smokey Quartz - SOLD
    • CVO3: 2024 FLTRXSTSE Golden White Pearl
Re: License Frame for '15
« Reply #23 on: October 24, 2014, 09:26:25 PM »

Looks great Eagle......  :2vrolijk_21:
Logged

HighOnHD

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 377
  • www.CVOHARLEY.com
    • WA


    • CVO1: 2015 FLHXSE UV Blue/Molten Lava
Re: License Frame for '15
« Reply #24 on: December 26, 2014, 07:19:51 PM »

I just installed the Universal Yaffe frame on mine as well. I second everything Eagle1 said. I am glad I remembered reading his post. I got mine installed and plugged in the connector and yep no LED lighting. Searched this thread hoping I remembered correctly that someone had to reverse the wiring. I also searched and found out how to pull out the pins in the connector and reverse them rather than cutting the wires. Posting so others can do the same. Just pry out the orange wedge from the end of the connector to expose the pins. Then use a small flat blade screw driver to pry up a little pin retainer inside the end of the connector while pulling on the wire. The wire will then pull out. Remove both and push them back in but swap locations.
Logged

mjb765

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6748

    • CVO1: 2011 FLHXSE--sold
    • CVO2: 2015 FLHXSE--sold
    • CVO3: 2018 FLTRXSE
Re: License Frame for '15
« Reply #25 on: December 26, 2014, 08:02:27 PM »

I drilled out the threads in the rear fender and put longer bolts through and secured the frame. Reversed the wires and mines installed as well!!!
Logged

EAGLE1

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1488
    • FL


    • CVO1: 2015 FLHXSE CVO Street Glide "Silvia"
    • CVO2: 2006 FLSTFSE² Screamin’ Eagle® Fat Boy® (SOLD)
Re: License Frame for '15
« Reply #26 on: December 27, 2014, 02:33:51 PM »

I just installed the Universal Yaffe frame on mine as well. I second everything Eagle1 said. I am glad I remembered reading his post. I got mine installed and plugged in the connector and yep no LED lighting. Searched this thread hoping I remembered correctly that someone had to reverse the wiring. I also searched and found out how to pull out the pins in the connector and reverse them rather than cutting the wires. Posting so others can do the same. Just pry out the orange wedge from the end of the connector to expose the pins. Then use a small flat blade screw driver to pry up a little pin retainer inside the end of the connector while pulling on the wire. The wire will then pull out. Remove both and push them back in but swap locations.

sure would have been nice if they told you how to do this in the instructions  >:(
Logged
Toes in the water, ass in the sand

mjb765

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6748

    • CVO1: 2011 FLHXSE--sold
    • CVO2: 2015 FLHXSE--sold
    • CVO3: 2018 FLTRXSE
Re: License Frame for '15
« Reply #27 on: December 28, 2014, 12:27:17 AM »

sure would have been nice if they told you how to do this in the instructions  >:(

They would have no need to put that in the instructions since the web site says it does not fit 2014-2015 CVO models. So technically we are making it fit on our own. Just sayin.....
Logged

EAGLE1

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1488
    • FL


    • CVO1: 2015 FLHXSE CVO Street Glide "Silvia"
    • CVO2: 2006 FLSTFSE² Screamin’ Eagle® Fat Boy® (SOLD)
Re: License Frame for '15
« Reply #28 on: December 28, 2014, 11:27:30 AM »

They would have no need to put that in the instructions since the web site says it does not fit 2014-2015 CVO models. So technically we are making it fit on our own. Just sayin.....

but they do note that the polarity could be different and that you might need to switch them so a little heads up on how to do that without having to cut the wires would have been nice
Logged
Toes in the water, ass in the sand

mjb765

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6748

    • CVO1: 2011 FLHXSE--sold
    • CVO2: 2015 FLHXSE--sold
    • CVO3: 2018 FLTRXSE
Re: License Frame for '15
« Reply #29 on: December 28, 2014, 12:01:31 PM »

Didn't notice that....Didn't bother to read since it said it wouldn't fit.
Logged
Pages: 1 [2] 3 4  All
 

Page created in 0.23 seconds with 24 queries.