Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[JustDennis]

I want to put either 10" or 12" Yaffe Monkey Bars on my 2010 FLHXSE but not really sure what all I need.  I have been following the threads here and am still not sure if the bars with work with the hydraulic clutch.  I talked to sales at Yaffe and they said that I would need to get a different clutch part for the bars to work.

Have any of you used the Yaffe MBB with stock parts?  They suggested I call Hill Country Customs.  Really just looking for direction.  Thanks

[willyB]

I put Yaffe's 12" on mine and replaced all the lines, including the front brake lines from under the triple trees to the front brakes, clutch line and the lines to & from the ABS.

I bought the whole setup from Yaffe. Worked perfect!

I hear the 10" can use stock lines. Their are some threads on here if your run a search.

By the way, I love my 12" bars. You can still see with your stock mirrors on the fairing. You cannot with the 10's.

[JustDennis]

So you didn't have any issues with the hydraulic clutch not fitting?


Ride Safe,
JustDennis

Sent from my iPhone using Tapatalk

[krypto2011]

Put 10's on mine and only extended wiring but not cuz I had too but wanted to to keep things in original location under the fairing. No issues with clutch master cylinder like they say may happen. Some have said yaffe makes a set of bars for CVO that have a flat  spot milled on them for clutch master clearance issues but no flat spot in mine and they work fine!! 2011 flhxse2

[JustDennis]

Put 10's on mine and only extended wiring but not cuz I had too but wanted to to keep things in original location under the fairing. No issues with clutch master cylinder like they say may happen. Some have said yaffe makes a set of bars for CVO that have a flat  spot milled on them for clutch master clearance issues but no flat spot in mine and they work fine!! 2011 flhxse2

Thanks, when I spoke to Yaffe yesterday, they told me they didn't have a special set of bars for my application (CVO) but that I could get a different clutch part.  Sounds like I can just get the regular 10" bars.  I appreciate the response.  I will probably extend the wires also.  Getting ready for winter projects!

[redbeard719]

JD,

Have a look at this thread I started a while back.  I did 14" PYO MBBs, and I did +8 on the brake and clutch line.

http://www.cvoharley.com/smf/index.php?topic=69807.msg968011#msg968011

The clutch MC may touch the bars, but it's a non issue. 

Let me know if you have any questions I can help answer.

[JustDennis]

JD,

Have a look at this thread I started a while back.  I did 14" PYO MBBs, and I did +8 on the brake and clutch line.

http://www.cvoharley.com/smf/index.php?topic=69807.msg968011#msg968011

The clutch MC may touch the bars, but it's a non issue. 

Let me know if you have any questions I can help answer.

Thanks.  I'll take a look.