Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: New Wood TW-222 cams  (Read 4895 times)

0 Members and 1 Guest are viewing this topic.

HILLSIDECYCLE.COM

  • Banned
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2085
New Wood TW-222 cams
« on: July 30, 2012, 08:37:44 AM »

14/34 228 .555 .156
34/14 228 .555 .156
Not an hp monster, but a real tractor-type, grind.
Scot
Logged

Jim Kennedy

  • Newbie
  • *
  • Offline Offline
  • Posts: 29
Re: New Wood TW-222 cams
« Reply #1 on: July 30, 2012, 09:35:52 AM »

Translation please.....?

What type of bike and what particular riding style would be benefitted by this cam?

Any idea what type of power [HP/torque] increases you would see, and what RPM the increases would be at?

Logged

Dead_Reckoning

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 608
  • 03 SERK
Re: New Wood TW-222 cams
« Reply #2 on: July 30, 2012, 12:35:16 PM »

14/34 228 .555 .156
34/14 228 .555 .156
Not an hp monster, but a real tractor-type, grind.
Scot

Sooo, are you talking John Deere Torque kicking in at 2500?

« Last Edit: July 30, 2012, 12:36:58 PM by Dead_Reckoning »
Logged
Government is best which governs least.

Power Commander 3 Tuner
Doherty Power PACC with K&N Air Filter
Screamin' EagleĀ® Hydraulic Cam Chain Tensioner and High-Flow Oil Pump
Headwinds 2" Bullet Passing Lights 50w'
Progressive 440HD Shocks & Monotube Fork cartridges
Dual Bulb Halogen Headlamp Kit

hotrod98

  • Newbie
  • *
  • Offline Offline
  • Posts: 7
Re: New Wood TW-222 cams
« Reply #3 on: July 31, 2012, 09:50:15 AM »

from Woods site: TRIPLE DEUCE: HOLD ON TIGHT SUPER LOW- MID RANGE & RUNS LIKE HELL UP TOP!!
96 thru110 - 2006 Dyna, all 2007  2013 models

  between the 5-6 and the 555: just guessing but knowing where the others hit i would guess 2100rpm to 2300rpm

 maybe not as compression reliant
 what do you think, Scott
Logged

HILLSIDECYCLE.COM

  • Banned
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2085
Re: New Wood TW-222 cams
« Reply #4 on: July 31, 2012, 10:43:55 AM »

Yes, it is a low compression grind.
Scott
Logged

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3118
Re: New Wood TW-222 cams
« Reply #5 on: July 31, 2012, 07:33:46 PM »

My guess it it will pull a little better than Bobby predicts in a 110.
« Last Edit: July 31, 2012, 07:35:47 PM by Deweysheads »
Logged

firehog383

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 93
    • WA

Re: New Wood TW-222 cams
« Reply #6 on: August 21, 2012, 11:51:32 AM »

What about the the TW-5 cam of Bobby's. Will that pull up to 5500 rpm?
Logged

firehog383

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 93
    • WA

Re: New Wood TW-222 cams
« Reply #7 on: August 21, 2012, 11:56:57 AM »

I'm looking for a cam that pulls hard from 2200 up. The stock cam lays down a little early for me. I'm staying stock except for exhaust, undecided yet on fullsac header and 2.25 cores or going with the fat cat 2-1 quiet performance with a ghost pipe  on my 2012 SESG
Logged

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3118
Re: New Wood TW-222 cams
« Reply #8 on: August 21, 2012, 08:36:00 PM »

What is a tractor cam in one motor combo can be one with long legs in another especially when the heads work better :orange:
Logged

Jim Kennedy

  • Newbie
  • *
  • Offline Offline
  • Posts: 29
Re: New Wood TW-222 cams
« Reply #9 on: August 21, 2012, 10:15:34 PM »

Ummm.......  "pulls hard from 2,200 on up".........?

I have this horrible sense of impending "disappointment"........
Logged
 

Page created in 0.133 seconds with 25 queries.