Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Stgeg]

I am planning to put the 12" Paul Yaffe Monkey Bars on my 2015 SG , and I wonder if is this handlebars need to change the stock cables ? It is written on Paull Yaffe's website that 10" and 12" monkey bars can use the stock cables and no need to get longer cables or extension . Is any one did this setup before? I appreciate your advice .
Thanks
Amr 

[BITCHIN BAGGER]

with the 12" yes. not sure about the 10"s

[Stgeg]

with the 12" yes. not sure about the 10"s

Sorry , you mean you need to change the stock cables or not ? By the yaw the bars looks very nice on your bike , I have the same color

[BITCHIN BAGGER]

YES HAD TO CHANGE CABLES.

[krypto2011]

10" no need to extend.

[Stgeg]

10" no need to extend.

Thank you krypto2011

[Pamarella]

Per Paul Jaffe shop in person last week, cables are NOT needed for 10" or 12" monkey bars on the 2015 CVO Street Glide. However, most installers assume that because they used to be necessary on older models that they still are so they order cables and install them. NOT necessary, call Jaffe in Phoenix direct to verify.

[KY-SESG]

XPer Paul Jaffe shop in person last week, cables are NOT needed for 10" or 12" monkey bars on the 2015 CVO Street Glide. However, most installers assume that because they used to be necessary on older models that they still are so they order cables and install them. NOT necessary, call Jaffe in Phoenix direct to verify.

Thanks, Pamarella!  I am debating between 10 and 12" and having to do the cable swap was swaying me towards the 10s.

[OBB]

Thanks, Pamarella!  I am debating between 10 and 12" and having to do the cable swap was swaying me towards the 10s.

I hope you're not in any hurry for them. Guys have been posting on the RG forum that it's about a 3 month wait, and that's if they don't lose your order.

[Chains]

Must be on a slow boat from China   

[HighOnHD]

Yea I was lucky I got mine relatively quickly in about two weeks. Just received the bagga chips they took three months.

[harleylimited]

Amr , this is S.Hashash . 12 inch bars work with stock cables , u only need namz 8" kit  for wiring

[Fast FLHX]

10" will work, but your arms will block the mirrors.  Not a big deal.

[JustDennis]

Thanks, Pamarella!  I am debating between 10 and 12" and having to do the cable swap was swaying me towards the 10s.

I just did the 10" extended wiring but lines were fine. Looks like 12" would be really tight to me. Others have said it is doable but I would get longer brake and clutch lines if I went 12"


Sent from my iPhone using Tapatalk

[cvosglide]

Just had the 10 installed no need to get new lines