Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[flibb]

ok down loaded the new version . when i plug it in it says no playable media found what am i doing wrong

[flibb]

never mind you put the usb in before  you turn on the Aux power.

[vinver]

I have installed version 1.18.3 and all seemed in order but now my touch screen is behaving erratically. Sometimes when I press a button on the screen it does not recognize that I am pressing and at other times when I press it it recognizes the command but hangs and it thinks I am pressing continuously. That means that it begins scrolling uncontrollably.

Also I seem to be unable to press the buttons on the left or right hand side of the title bar.

I have not used the bike for a while due to the weather so I cannot be sure that this has been caused by the update or whether my system is faulty. I guess I would want to (re-)calibrate the screen but I cannot find a facility for that.

Anybody else encountered these faults.

Thanks
Vincent

[vinver]

OK I was too hasty. Found out how to re-calibrate the touch screen and now issue has been resolved.

Thanks
Vincent

[dp]

AVC still not working for me after the download of 1.18.3. Rode abot 250 miles yesterday and still have to turn off and on AVC to hear radio at above 60 mph and have to manually turn down volume at stop lights. Also had to turn bike of and on a couple of times to get volume control to work at all.

On the bright side radio works great on my 2013 CVORG with no problems at all.

[guarddan]

Guys, I just tried to load this update to my 2015 cvo limited with no success. I put my usb thumb drive in and it comes up with do I want to do the update yes or no. Only the no is highlighted not the yes. So I am unable to hit yes. Does anyone have any thoughts on what I am doing wrong? Also, it says have the bike on accessory, is that with the ignition switch in the unlocked position? Thanks Dan

[dp]

Guys, I just tried to load this update to my 2015 cvo limited with no success. I put my usb thumb drive in and it comes up with do I want to do the update yes or no. Only the no is highlighted not the yes. So I am unable to hit yes. Does anyone have any thoughts on what I am doing wrong? Also, it says have the bike on accessory, is that with the ignition switch in the unlocked position? Thanks Dan

Maybe. I had to re-format my USB drive, open the downloaded zip folder and then copy to the USB.

[WTF Chuck]

Well I downloaded and installed 1.18.3. Zoom seems to work AVC
works so far it is going back to the last source after turn off and on.
So i  built a route from VA to Austin TX using. https://www.myscenicdrives.com/road-trip-planner
It includes 4 stops and about 45 waypoints exported as a Garmin
GPX file to the USB stick and imported to the bike. What i found was that u only need to save the end of ride file and it contains all the info.
So I then did a whereto looked in saved and the file was there picked the file clicked on options and viewed route all was good went back
2 times hit go and loaded the route and it came up on the screen
zoomed out and i could see the complete route on screen. It followed  my waypoints  the mileage and time were correct.
I have not been able to ride yet to see if the fix for missed waypoints works or not. It does look like at last we may be able to use the GPS
with imported routes the way it was meant to be.

[AMEDD_SFC]

Guys, I just tried to load this update to my 2015 cvo limited with no success. I put my usb thumb drive in and it comes up with do I want to do the update yes or no. Only the no is highlighted not the yes. So I am unable to hit yes. Does anyone have any thoughts on what I am doing wrong? Also, it says have the bike on accessory, is that with the ignition switch in the unlocked position? Thanks Dan

Plug in the USB.
Push and hold the "trip trigger" on left switch to get into accessory mode.

The error you mention is exactly what happens when you use the "key" to turn on the ignition.

Went through the drill several times before I figured it out. (I didn't get a manual with the bike - had to wait)  Discovered the "trip trigger" by accident.

Good Luck

M

[mrambo4]

Okay tried the trip button, formatted the thumb drive, and transferred the file in the zip folder to the root on the thumb drive.   Put the thumb drive in the sub port, hit the trip switch and the radio and everything comes up but never asks if I want to do a upgrade. Any ideas, dealer tried it was the old update and never got it to work, tried different thumb drives too.  Guess may have a defective usb port.

[Boatman]

Guess may have a defective usb port.

Could be the problem as I am not computer savvy and was able to do it.  Even when I hadn't unzipped the file, the radio would at least tell me the file was not recognizable.

I turn on the accessory switch, let the radio boot up, and then put in the thumb drive.  May try that but next trip would be the dealer.  Good luck and let us know what works. 

[mrambo4]

I have tried it 10 times at least, and the dealer did it a few times at the 1000 mile checkup. They could never get it to do it, and I only had it happen once.  I think when it warms up here it is going in for a new port.  I use the trip trigger to turn on the acc. And have the radio both on and off and it hasn't noticed the thumb drive.

[WTF Chuck]

What format did you use i think it has to be FAT32

[mrambo4]

Quick format, I think that is usually the one that is the default, but will check that tomorrow.   The dealer was pretty upset too, he called HD and they told him he must be doing something wrong.  I really think it's the port

[GregKhougaz]

I'm no computer tech but maybe... When I down loaded the file, I got a file entitled "swdl_boombox6.5GT_1.18.3."  I then opened that file and saw two files, a text document of 1KB and an image file of 838 KB.  I copied only the image file over to the USB stick and then uploaded.  Worked fine.   

However!  My speed volume control still turns off with the bike and the system will not show text messages.  It says there is an error in syncing the messages.  Any thoughts?       Thanks!