Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 [3]  All

Author Topic: 110 C.I MAKES 125 HP AND 125 Torque  (Read 36467 times)

0 Members and 2 Guests are viewing this topic.

wouldkarver

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
Re: 110 C.I MAKES 125 HP AND 125 Torque
« Reply #30 on: January 13, 2009, 08:19:28 PM »

No....this is all I have from the dyno
Logged

gremlush

  • I may not be good, BUT, I am slow.
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 167
Re: 110 C.I MAKES 125 HP AND 125 Torque
« Reply #31 on: January 13, 2009, 08:30:05 PM »

Thats a goog looking dyno run ,don't get me wrong. Its 2-3 higher than it would be in SAE.  Good cams. I am a dealer for Woods cams too and have know Bob since before he did cams. He started with carbs. If you don't believe me ,look at the 'old' Daytona dyno shootouts. He won with 3SUNS cams.  I been doing this stuff  WAYYY too long. Gunsmoke is on !
Logged

1abastarsmda

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 3403
    • PA

    • CVO1: 2021 CVO Limited
Re: 110 C.I MAKES 125 HP AND 125 Torque
« Reply #32 on: January 13, 2009, 08:41:23 PM »

Gremlush, what do you think he would gain with the bigger throttle body along with his current setup?
Logged

gremlush

  • I may not be good, BUT, I am slow.
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 167
Re: 110 C.I MAKES 125 HP AND 125 Torque
« Reply #33 on: January 14, 2009, 09:26:56 AM »

If your talking about the 08 SERK , not much in the RPM you ride ! 2500-3500 rpm. as it already has a 50mm. Yes, you will gain 4-6 more at 3500 and above ,BUT, will you feel it ?  Just remember one thing.  HP sells parts. TQ wins races. PERIOD ! Dewey  ps. it take 3+ lbs. tq. for you to feel in the seat of your pants , and if you really want to go fast ,lose weight !!! it take 10 tq. more for evey 100 lbs. of weight. I am sure someone will hit me on the 3+ tq. thing ,I know ,I know , just like that ex. pipes that was susposed to give me 20 hp.  I lost 12 , but it was loud and I thought I was going fast. LOL
Logged

ematicic

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 159
    • VA


    • CVO1: 2013 Break Out
Re: 110 C.I MAKES 125 HP AND 125 Torque
« Reply #34 on: October 07, 2013, 07:12:55 PM »

Any new technology out there that makes this info out of date. I was thinking of "waking up" my CVO BO. It was suggested to go with 585 Cams and 10.5-1 compression. I already have the 2-1 bassani road rage short being installed now. I also have SERT.

Also curious about Lifters, injectors and any recommended change to the clutch.
Logged

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3118
Re: 110 C.I MAKES 125 HP AND 125 Torque
« Reply #35 on: October 08, 2013, 06:53:06 PM »

Well HP and TQ are higher with less now. Your injectors are OK as-is. TB could use an upgrade. The SE 259 Stg kit with the 10.5 SE pistons can be tweaked to get over 123 SQ and with a 9B or 662-1 the 110" pushes the 130 mark.
Logged
Pages: 1 2 [3]  All
 

Page created in 0.129 seconds with 25 queries.