www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: CVO Breakout risers, they are 1 1/4"  (Read 3221 times)

0 Members and 1 Guest are viewing this topic.

KLB0

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 76
CVO Breakout risers, they are 1 1/4"
« on: February 19, 2014, 11:13:59 PM »
Been getting some questions about my setup with my Todd's 10"  ape's.   See pic for the riser measurement- make sure your new bars are 1.25" at the clamping area. 

The OEM CVO breakout riser(speedo/indicator combo) is 1 1/4" thick.  I still have the 1 1/2" thick apes(1.5" at the clamp area too) and tried to find a local shop to mod a stock riser from 1.25 to 1.5 with no luck.  Not enough room to nib it out to 1.5".  I bought 1.5" diameter risers by Buffalo but would lose the speedo and indicators.  So I decided to go with the 1.25" thick apes for now.  So I have a set of apes, a set of 1.5" diameter risers, and a stock cvo riser/speedo housing combo just sitting in boxes, and my hopes someone can mod it to fit. 

Hope this helps,
Ken
Logged
2013 FXSBSE Black Diamond Molten Silver, VH Shortshot Staggered pipes, Power Vision tuner, Shotgun Shock,  Todd's 10" apes

sinner

  • Newbie
  • *
  • Offline Offline
  • Posts: 35
  • www.CVOHARLEY.com
Re: CVO Breakout risers, they are 1 1/4"
« Reply #1 on: July 20, 2014, 07:54:01 PM »
Great info, thank you
Logged

KLB0

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 76
Re: CVO Breakout risers, they are 1 1/4"
« Reply #2 on: July 21, 2014, 10:17:57 AM »
No problem, please let me know what you come up with.
Ken
Logged
2013 FXSBSE Black Diamond Molten Silver, VH Shortshot Staggered pipes, Power Vision tuner, Shotgun Shock,  Todd's 10" apes
 

Page created in 0.117 seconds with 21 queries.