Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Scott7d]

Build and tune performed by Sheffer Performance HD, also known as "Durwood" on a few forums. He picked out the parts based on my goals and riding style. Beyond satisfied with the service and results. CCP 200/200.

Bored to 113" by Larry's Motorcycle and Machine (WFOlarry)
Zero decked
"110" Heads by Larry's Motorcycle and machine - CNC ported, AV&V beehive Springs, 2.1 intake, 1.6 exhaust, bronze guides
KB forged pistons, just under 10.2 to 1
HPI 58mm elliptical throttle body
Marren 4.9 fuel injectors
Cycle-Rama 575 cams
Cycle-Rama cam bearings
Hylift Johnson performance lifters
S&S stage 3 Oil pump
S&S crank and flywheel
S&S piston cooling oil jet kit
Rockout rocker lockers
Screamin Eagle pushrods
Screamin Eagle Agitator air cleaner
Fullsac DX headers
Crusher exhaust
Alto carbonite clutch plates
AIM SDR clutch

[FlaHeatWave]

Nice Curves

[Mr D]

Feed a table of 10 with that torque curve 
Daren with his recommendations & tune
Larry with his finesse on the heads   

[Scott7d]

When I saw the torque "curve" if that's what you wanna call it, I was like ohhhh man

[Mr D]

When I saw the torque "curve" if that's what you wanna call it, I was like ohhhh man

Oh ya! 

[CVOThunder]

Was able to see the sheet over on HTT and that looks like a pretty fun ride. Good job!

[luc.who]

Very nice, has to be a lot of fun to ride.

[Fullsac Performance]

120 FT pounds at 2700 RPM! That's big TQ way early. No downshifting required for passing on this one.
Just roll and hang on.

Nice job!   

SG

[mike jesse]

Only problem I see with this build is finding enough riding time to wear it out.

Good job to all.

[Scott7d]

120 FT pounds at 2700 RPM! That's big TQ way early. No downshifting required for passing on this one.
Just roll and hang on.

Nice job!   

SG

I don't have the graphs over-layed yet, but definitely a big boost across the board from stage 1, which wasn't necessarily a slouch. 100TQ comes in about 100rpm earlier with this build. Keeping that low end was definitely important, but it stretches out there if I wanna play a bit

[remington007]

Crushers with STD baffle or Mellows? Sweet torque curve!

[Scott7d]

Thank you, standard baffle.

[Para Bellum]

Great performance with reasonably low compression/CCP.  Big congrats on this one.

[Durwood]

I don't have the graphs over-layed yet, but definitely a big boost across the board from stage 1, which wasn't necessarily a slouch. 100TQ comes in about 100rpm earlier with this build. Keeping that low end was definitely important, but it stretches out there if I wanna play a bit

Thanks guys for the kind words.
Here ya go Scott, the stage one vs the new bullet.

[Ridgerunr]

Fine work assembling & tuning Daren.

Daren's work ethic and passion for fine running motors is always worth the trip to his shop. Those that live in the area, are indeed blessed.