www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Harley 7 pin plug conversion  (Read 1360 times)

0 Members and 1 Guest are viewing this topic.

JCTulsa

  • Newbie
  • *
  • Offline Offline
  • Posts: 6
Harley 7 pin plug conversion
« on: May 15, 2008, 07:31:37 PM »

Hello.  New guy here from Tulsa.  Just discovered the forum and it looks great.  I ride a 2005 Ultra Classic.
I'm wondering if any of you have ever taken a 7 pin plug cord and converted 1 end to mate to a 1/8" stereo plug?
I have not been able to figure out which wires from the 7 pin plug are left, right and common for just the speakers.

Thanks in advance.

JC
Logged

erniezap

  • Global Moderator
  • 2.5K CVO Member
  • *****
  • Offline Offline
  • Posts: 4879
  • Why have only one?

    • CVO1: 2012 SEUC - Black/Orange
    • CVO2: 2005 SEEG - Cherry
Re: Harley 7 pin plug conversion
« Reply #1 on: May 15, 2008, 07:58:36 PM »

Welcome to the site!  While I personally don't know the answer to your question, I'm sure that someone else will.

Just what we need, ANOTHER JC!  :huepfenjump3:
Logged
2012 Black/Orange SEUC

2005 Cherry SEEG
Thuderheader w/Falsie
Stage One Air Cleaner
Power Commander
Freedom Gear Drive Cams
Bitubo rear shocks
Hawg-Wired Amp and speakers

aushog

  • 2008 Frosty
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 183
Re: Harley 7 pin plug conversion
« Reply #2 on: May 15, 2008, 08:00:32 PM »

I found the following on another forum.  Used it to attach a 1/8" plug and earbuds in place of the speakers.

I think it is looking at the pinout on the bike.  The plug on the cord would be reversed.  You might want to doublecheck with a voltmeter.

Ultra Headset DIN Plug Pinout:
Looking at the 7-pin connector with the index groove in the connector at the twelve o'clock position, the bottom pin is #2. So clockwise from the index groove the pins are #6, #1, #4, #2, #5, #3, #7.

6 is the shield/ground (one o'clock position)
1 is the microphone input (three o'clock position) (-)
4 is the microphone ground (five o'clock position) (+)
2 is the speaker ground (six o'clock position) (-)
5 is the left speaker positive (seven o'clock position) (+)
3 is the right speaker positive (nine o'clock position) (+)
7 is the handheld PTT (eleven o'clock position)

Logged

Fired00d

  • Global Moderator
  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 29735
  • Orange & Black SEEG... Can it get any better?
    • VA


    • CVO1: FLHTCSE
Re: Harley 7 pin plug conversion
« Reply #3 on: May 15, 2008, 09:12:36 PM »

JC,
I can't answer your question either, but wanted to welcome you to the site. Glad to have you join us. :2vrolijk_21: When you get a chance you should go to this board - New Member Introduction and start a thread to introduce yourself.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Logged
:pumpkin: 2004 Screamin’ Eagle Electra Glide :pumpkin:
Rinehart True Duals
SE Breather
SE Race Tuner
HogTunes Speakers
Zippers 575 Gear Drive Cams
Zippers Pro-Tapered Adjustable Push Rods
Zippers Oil Pressure Bypass Shim
Feuling Oil Pump
Feuling Lifters
Zumo 550 W/Flame Caps
Lyndall Z+ Brake Pads
CVOHarley Member #1238
PGR Member #754
Proud Member EBCM #2.0

grc

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 9961
  • AKA Grouchy Old Fart
    • IN


    • CVO1: 2005 SEEG2
Re: Harley 7 pin plug conversion
« Reply #4 on: May 15, 2008, 09:22:04 PM »

Visual representation of the above explanation:

Jerry
Logged
Jerry - 2005 Cherry SEEG  -  Member # 1155

H-D and me  -  a classic love / hate relationship.  Current score:  love 40, hate 50, bewildered 10.

JCTulsa

  • Newbie
  • *
  • Offline Offline
  • Posts: 6
Re: Harley 7 pin plug conversion
« Reply #5 on: May 16, 2008, 05:21:16 AM »

Thanks a lot, guys.  I'll give the information a try and see what I come up with.

JC
Logged
 

Page created in 0.101 seconds with 22 queries.