Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2]  All

Author Topic: Rack For My SERG?  (Read 5225 times)

0 Members and 1 Guest are viewing this topic.

Texas 103

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1483
  • FLHRSEI.ORG
    • TX

    • CVO1: 2016 "RGU"
Re: Rack For My SERG?
« Reply #15 on: August 13, 2009, 11:18:41 AM »

Welcome fireguy,

        I'm sure all of us here appreciate a good rack.   :o  It's certainly a good alternative to a tour pak.  You seem to be on the right track sound wise.  As long as your taking the fairing off, you might want to consider a hidden antenna.  Here's one from   Dakota Digital.  They seem to work well and you can either disconnect the stock antenna and / or remove the rubber end.  You can also install a "y" connector to use both antennas.  Good luck with it! 

GK


Hell I always appreciate a good rack behind me!
Logged
Too Much of a good thing is just right !! Then more is always better

Dracula

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 186
Re: Rack For My SERG?
« Reply #16 on: August 13, 2009, 11:57:05 AM »

I hadn't seen the stealth rack on an RG Drac. Got a good picture of it w/o the cooler?

If you can wait a couple of days I can post a pic.  Bike is in the shop waiting on a rear tire  :(!

Here's my luck.  I take it in for the wheel recall, not a R1 or R2, cool.  I ride maybe two times, then finally get around to cleaning the tire mounting goop off of the tire (from the recall un-mount/mount), and I find a nail in the tire.  I bought a tire and wheel warranty, so they will replace the tire...BUT THEY DON'T HAVE ANY IN STOCK!!!! :sauer005:!

Supposed to get the bike back tomorrow.  Let me know if you still want a pic.
Logged

:vampire:

HawgSounds

  • The Ultimate in Harley Sound Systems
  • Vendor
  • Full CVO Member
  • *
  • Offline Offline
  • Posts: 197
  • The Ultimate in Harley Davidson Sound Systems

    • CVO1: 2009 CVO Road Glide
    • CVO2: 2005 CVO Electric Glide
    • www.hawgsounds.com
Re: Rack For My SERG?
« Reply #17 on: August 16, 2009, 08:35:47 AM »

Here is a pic of the stealth rack on my bike.
Logged
Motorcycles Unlimited -Hawg Sounds
269 S Beverly Drive Unit 201
Beverly Hills, Ca 90212
1-877-888-2788

HawgSounds

  • The Ultimate in Harley Sound Systems
  • Vendor
  • Full CVO Member
  • *
  • Offline Offline
  • Posts: 197
  • The Ultimate in Harley Davidson Sound Systems

    • CVO1: 2009 CVO Road Glide
    • CVO2: 2005 CVO Electric Glide
    • www.hawgsounds.com
Re: Rack For My SERG?
« Reply #18 on: August 16, 2009, 08:37:55 AM »

Another Pic
« Last Edit: August 16, 2009, 08:40:42 AM by Hawg Sounds »
Logged
Motorcycles Unlimited -Hawg Sounds
269 S Beverly Drive Unit 201
Beverly Hills, Ca 90212
1-877-888-2788

Screamin

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5087
  • Number 641

    • CVO1: 2005 SEEG2 Cherry
    • CVO2: 2019 Road Glide Ultra
Re: Rack For My SERG?
« Reply #19 on: August 16, 2009, 10:03:55 AM »

Thanks H.S.
Logged

Dracula

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 186
Re: Rack For My SERG?
« Reply #20 on: August 18, 2009, 11:01:35 AM »

Sorry I didn't get you the pic  :oops:  I didn't get the bike back until late Friday and then was on the run all weekend. 

Dealer couldn't get a Dunlop to replace my OEM, so I paid up and got an Avon.  We'll see how it works out.
Logged

:vampire:

Highjagger

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2523
  • tradition`s not worship ash but pass on the fire

    • CVO1: FXSE Breakout Pro Street 2016 ,- and 2011 Crossbones FLSTSB ,- and 2016 LowRider s FXDLs
Re: Rack For My SERG?
« Reply #21 on: August 18, 2009, 04:24:47 PM »

If you can wait a couple of days I can post a pic.  Bike is in the shop waiting on a rear tire  :(!

Here's my luck.  I take it in for the wheel recall, not a R1 or R2, cool.  I ride maybe two times, then finally get around to cleaning the tire mounting goop off of the tire (from the recall un-mount/mount), and I find a nail in the tire.  I bought a tire and wheel warranty, so they will replace the tire...BUT THEY DON'T HAVE ANY IN STOCK!!!! :sauer005:!

Supposed to get the bike back tomorrow.  Let me know if you still want a pic.

My dealer had no idea how to get a tire so i ordered the tire at my local tire-shop for half the price of harley listing and the dealer mounted it and was astonished where i did get it .
Logged
Success is to stand up one more than to fall down

sem_bunda

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 190

    • CVO1: FLTRSE3 Electric Orange
Re: Rack For My SERG?
« Reply #22 on: August 18, 2009, 05:43:54 PM »

Don't need to post a pic since there's one here already, but I also have the Stealth rack and it looks GREAT on the bike.  Functional, too, as T-Bag fits well on it.  I suggest you purchase the quick-release set up also and if you plan on having a BSR, buy the "extra" quick-release set up for the backrest and stealth rack all in one.  It is well worth it.
Logged

jfh

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 679

    • CVO1: FLTRSE3
Re: Rack For My SERG?
« Reply #23 on: August 19, 2009, 07:39:22 PM »

Another Pic

Stealth Rack looks great on your O/B serg :2vrolijk_21:
Logged
Hammer - CVO Member #641

2009 FLTRSE3: Axtell jugs, JE forged flat top pistons, S&S 585 cams, SE 58mm TB, Dewey's Pro-Street porting, SE cam plate, Zipper's tapered pushrods, Cat-less, 2" Fullsac, TTS, Twin Jagg oil coolers, AK-20, 13" Works Black Trackers w/ARS, Clearview, Hawg Wired, Yaffe Monkey Bars, Danny Gray Big Seat

bribe36

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 874

    • CVO1: 2009 SERG
Re: Rack For My SERG?
« Reply #24 on: August 22, 2009, 10:10:33 PM »

Does the stealth rack come with all the hardware you need to mount it on a SERG with the stock back rest?
Logged

bribe36

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 874

    • CVO1: 2009 SERG
Re: Rack For My SERG?
« Reply #25 on: September 06, 2009, 11:45:47 PM »

Does anybody know if the stock back rest fits on this rack or are there other parts that are needed?
Logged

Highjagger

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2523
  • tradition`s not worship ash but pass on the fire

    • CVO1: FXSE Breakout Pro Street 2016 ,- and 2011 Crossbones FLSTSB ,- and 2016 LowRider s FXDLs
Re: Rack For My SERG?
« Reply #26 on: September 07, 2009, 02:26:11 AM »

Does anybody know if the stock back rest fits on this rack or are there other parts that are needed?

The 4-point-docking-kit , nothing else is needed .
Logged
Success is to stand up one more than to fall down

bribe36

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 874

    • CVO1: 2009 SERG
Re: Rack For My SERG?
« Reply #27 on: September 23, 2009, 06:53:06 PM »

The 4-point-docking-kit , nothing else is needed .

If I'm adding a tour pak does it attach to the bike using the same 4 point docking kit?
Logged

04se103

  • Guest
Re: Rack For My SERG?
« Reply #28 on: September 23, 2009, 08:00:57 PM »

If I'm adding a tour pak does it attach to the bike using the same 4 point docking kit?
Yes
Logged
Pages: 1 [2]  All
 

Page created in 0.219 seconds with 21 queries.