www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Agitator Wheels  (Read 914 times)

0 Members and 1 Guest are viewing this topic.

jawarford1

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 86
Agitator Wheels
« on: October 26, 2010, 04:06:34 PM »

I really like the 18" Agitator wheels on the 2010 SESG and are thinking of putting them on my 04 Pumpkin...

Has anybody looked into this or have done it ?  And if you have or have the knowledge of the process I would appreciate your input.

I know an axle or wheel bearing change is necessary.....

Thanks

Joel
Logged

Wheelsnkeels

  • Freedom isnt free Thank a Vet!
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1300
  • Indiana Patriot Guard Riders

    • CVO1: 2010 SESG Tequila Sunrise
    • CVO2: 2007 Heritage Custom (not CVO) too much chrome
    • CVO3: 2006 Heritage Classic (overinvested in mods ?)
Re: Agitator Wheels
« Reply #1 on: October 26, 2010, 04:17:35 PM »

The front should fit fine, Not sure but I think you need the swingarm kit to fit the 180 in the rear check out FBI http://www.fatbaggers.com/ I know they offer a kit
« Last Edit: October 26, 2010, 04:41:42 PM by Wheelsnkeels »
Logged
RC Components Savage  200/55/17 Rear 140/70/21 front
Corbin Dual Tour (Heated)
Street Magic LED's
TTS Mastertune
Fueling 574 Cams & Lifters
SE Adjustable pushrods
Progressive Mono Tubes
Hog Tunes Hog Pods
J&M 7.25 Speakers w/250W Amp
Kuryakyn 9182 License plate frame
Vance & Hines Power Dual's
BUB Boom Cans slip on Exhaust 
Detach Tequila King Tour Pak
Rumble passenger Floorboards
Freedom Shield 7"
Riders Claw Iphone

Spiderman

  • aka Spiderman "guest"
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1170
Re: Agitator Wheels
« Reply #2 on: October 26, 2010, 04:19:52 PM »

I really like the 18" Agitator wheels on the 2010 SESG and are thinking of putting them on my 04 Pumpkin...

Has anybody looked into this or have done it ?  And if you have or have the knowledge of the process I would appreciate your input.

I know an axle or wheel bearing change is necessary.....

Thanks

Joel

Do you have a trusted private shop in your area ? Speak with them. Most all wheels have the same interior hub size with tub spacers and bearings set-up for the application. (make/model of motorcycle) I see metrics with H-D stuff and vice versa all the time

Henry
Logged
2007 Road Glide
 

Page created in 0.097 seconds with 23 queries.