Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Twolanerider]

[size=72]THEY'RE HERE!![/size]

[Unbalanced]

Don,
Just to be Firedood to the punch
 
[smiley=worthless.gif]

When are they going in and what exactly did you purchase ??

[Twolanerider]

Don,
Just to be Firedood to the punch
 
[smiley=worthless.gif]

When are they going in and what exactly did you purchase ??

From Zippers got the cams, gear drive kit, they're full on robot chubby pushrods, the oil pressure relief valve/shim/thing and of course a set of bearings.  From another source also have a Feuling pump and lifters to do at the same time.  And from an outstandingly cheap eBay score a couple of months ago also will go those dressy billet pushrod covers, lifter blocks and rocker box covers from the Harley P&A catalog.

The only downside to the parts arriving from Zippers so outstandingly promptly is that I didn't set time aside for the install until Friday.  Even that's ok though as time is scheduled on the Dyno on Saturday.  So if all goes well by mid-day Saturday it'll all be buttoned up and dialed in.

[Unbalanced]

Are you going to be using the Power Commander for adjusting A/F to the ECM?
May want to make sure they are using the latest software from DynoJet if they are and are you getting the Rev limiter increase module?

When you romp on the throttle after the dyno hold on the front tire does tend to leave the ground even though we know you will only use the extra power for country hill riding

It would be nice to get a collection of maps as well going.

[Twolanerider]

[smiley=worthless.gif]

Dammit, missed the  [smiley=worthless.gif] .  Ok, here ya go.


(Yes I was happy to see them!)

[Fired00d]

Twolane,
Glad to hear your parts have arrived. I talked to Zippers today, and I'm just waiting on the Hi-Flo Air Filter (and told them just to hold off on shipping until all parts come in, since they were giving us discount). Since you have a digital camera and I don't (still waiting on Sam's) and can only use the camera phone to take pictures, please post a picture of what I have sitting on the shelf @ Zippers waiting for me. [smiley=huepfenjump3.gif]

BTW - Seems like we pretty much doing the same thing (as you well know) as far as upgrades to motor [except for fuel management (PC vs RT)]. I will be contacting dealer in next couple of days checking for appointment to have install/dyno done, and ordering Fueling Oil Pump and Lifters. Not sure if this will be able to be done before Myrtle Beach Bike Week, but not going to worry about it. You'll just have to drop some breadcrumbs or do like we do in fire service (I'll give you some balloons w/flour in them, and you can throw them on the road so I'll know which way you turned).

[Fired00d]

Chit!! You beat me to it. I guess I'm typing slow... WTF is the "Trojanz" thingie? [smiley=nixweiss.gif]

 [smiley=pumpkin.gif]
Ride Safe,
Fired00d
 [smiley=fireman.gif]

[Fired00d]

Don,
Just to be Firedood to the punch
 
[smiley=worthless.gif]

When are they going in and what exactly did you purchase ??

Harry,
You asked for this, and Don replied. Am I missing something here in translation? Is there something I don't know? I've heard of "postaltacos" but don

[Twolanerider]

Can someone please advise?

 [smiley=pumpkin.gif]
Ride Safe,
Fired00d
 [smiley=fireman.gif]

Wait until your parts show up.  You'll be happy to see them too  [smiley=drink.gif] [smiley=huepfenjump3.gif] [smiley=drink.gif]

[Fired00d]

Wait until your parts show up.

[arcticdude]

Looks like it's from Woody's wallet!  There's a whole lot of wallet wear on that package!!! [smiley=huepfenjump3.gif]

[Unbalanced]

Well I see 3 flat push-rods, I see 2 cams,  not exactly sure where the Andrews Box fits in, but
I also see Don is prepared in the event he might get lucky.

Don I was actually hoping for a better picture of all the parts for those who might want to know what this stuff all is ....   I didn't do it, shame on me, but you are the picture sizing dude and i know that Firedood won't do it he keeps using Sam's doesnt have it in stock so i cant buy a digital camera excuse like no other store sells them.

I think a fruit bowl type of layout on a table would greatly help some people in that they would be sure of what they were getting or supposed to unbox

Both Cams, Bearings inner and outer, push rods, schim, oil pump, lifters, push rod tubes, lifter blocks, air cleaner etc and last but not least the emergency kit Trojan.

Like oil arent you supposed to change out that rubber every 2500 miles

[Gettinold]

SEE ANDREWS TROJANS ZIPPERS!!!!!!!!  MAKES SENSE ! [smiley=nervous.gif]

[Fired00d]

....

[SEULTRA]

Heh, can you blame me...

/me can't take pictures while riding..

Besides who wants to spend more (especially when they see a bargain) [highlight]on a digital camera when they can buy chrome [/highlight]and "go fast" stuff for the scooter.

/me thinks he has his priorities in order. [smiley=nixweiss.gif] [smiley=huepfenlol2.gif]

Oh, and on the