Topic: bigger rear tire on seeg? (Read 5155 times)

laylonlor · « **on:** November 10, 2004, 10:41:33 PM »

has anyone tryed putting a bigger tie on the rear and if so ,how big can ya go

Laker · « **Reply #1 on:** November 10, 2004, 10:52:55 PM »

laylonlor. the biggest i have seen comes from the pages of the december issue of hot bike. a guy mounted a 240 on a road glide but with some serious changes. Looks pretty good if you ask me.

naitram · « **Reply #2 on:** November 11, 2004, 09:01:52 AM »

any chance you could scan that in and post it for us?

Laker · « **Reply #3 on:** November 11, 2004, 10:11:05 AM »

I can get to it later today.

naitram · « **Reply #4 on:** November 11, 2004, 10:27:32 AM »

thanks

Laker · « **Reply #5 on:** November 11, 2004, 11:06:26 AM »

You're quite welcome. Also, I was trying to find the thread that spoke about a clear plastic that can be applied to painted parts of the bike. I would like to put one between my windshield pouch and the fairing so the paint is not scratched. If possible, could you point me in the right direction? Thanks.

pj57 · « **Reply #6 on:** November 11, 2004, 11:22:05 AM »

Hey Laylonlor - I'm starting to do some research on bigger tires/wheels for the SEEG.

naitram · « **Reply #7 on:** November 11, 2004, 11:33:18 AM »

check this thread http://flhrsei.org/cgi-bin/yabb/YaBB.cgi?board=eg_gen;action=display;num=1099236074

invisishield

Laker · « **Reply #8 on:** November 11, 2004, 11:49:16 AM »

Exactly what I needed. Thanks.

Spook_103 · « **Reply #9 on:** November 11, 2004, 11:55:01 AM »

Do you have a telephone number or site for the "invisashield? Thanks in advance. Spook.

mfgreen · « **Reply #10 on:** November 11, 2004, 12:36:31 PM »

Quote

Do you have a telephone number or site for the "invisashield? Thanks in advance. Spook.

http://solutions.3m.com/wps/portal/_s.155/86661

Laker · « **Reply #11 on:** November 11, 2004, 12:38:34 PM »

Quote

Do you have a telephone number or site for the "invisashield?

mfgreen · « **Reply #12 on:** November 11, 2004, 12:50:21 PM »

or try
http://www.chipguard.com/index.asp

Chip Guard Custom Designs
68 Hooper Road, Unit 123, Barrie, Ontario, Canada L4N 8Z9
Toll Free - North America    Local Calling
1-800-429-5967    (705) 728-5332
Toll Free Fax - North America    Local Fax
1-888-538-3333    (705) 728-0251
Email Enquiries    Orders
info@chipguard.com    orders@chipguard.com
Purchasing Kits    Territorial Enquiries
Click Here    Call 1-800-429-5967

Trust in Chip Guard.

Laker · « **Reply #13 on:** November 11, 2004, 01:13:04 PM »

Quote

any chance you could scan that in and post it for us?

Here is the web address to the 240 Road Glide. I will still post the article from Hot Bike later today. If you scroll down to the bottom of the home page there she is. You can click on it for a few more pics.

http://www.cc-cycle.com/

Laker · « **Reply #14 on:** November 11, 2004, 04:43:26 PM »

Quote

any chance you could scan that in and post it for us?

Here you go. Hope it comes out ok.

Laker · « **Reply #15 on:** November 11, 2004, 04:44:18 PM »

Next.

Laker · « **Reply #16 on:** November 11, 2004, 04:58:04 PM »

The photos became too large. I have posted the article at:

www.laker23.gfoto.com

They are labeled by number but do not appear in order.

TB · « **Reply #17 on:** November 12, 2004, 09:04:27 AM »

Here is another site you might want to checkout. They do a fat tire / fender kit for baggers.

http://www.dmcustoms.net/widetire/flhfenderkit.htm

dsmbagger · « **Reply #18 on:** March 17, 2007, 08:36:00 PM »

O.K. for fat tires on baggers, go to www.fatbaggers.com
P.M. also sells a 180 conversion which looks really good and is priced right, but is a chain conversion.

Puzzled · « **Reply #19 on:** March 19, 2007, 05:51:42 PM »

What year glide are you working on? There are multiple kits as suggested above offering a wide range of tire sizes.

A 160 will go in a stock arm and fender.
A 180 will go in a stock arm with a chain.
A 180 will go in a stock/modified arm with a belt and motor mount change (front lower)
A 200 will go with a aftermarket arm, fender and some sort of offset kit (motor or trans)
Any bigger takes all sorts of parts!

I'll post the pics of the 200 I just did.

Sneak peak....

IronButt · « **Reply #20 on:** April 09, 2007, 06:11:20 PM »

Quote from: laylonlor on November 10, 2004, 10:41:33 PM

has anyone tryed putting a bigger tie on the rear and if so ,how big can ya go

For the 07 FLHTCUI/SEUC a 150 is max. I ordered a 160 and was standing there with Bill and there was no way it was going to have any clearance between the top edges of the fender.
IronButt

Author Topic: bigger rear tire on seeg? (Read 5155 times)

mfgreen

mfgreen