Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: '19 117 Upgrades  (Read 1862 times)

0 Members and 1 Guest are viewing this topic.

TucsonDon

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
  • www.CVOHARLEY.com
    • AZ

'19 117 Upgrades
« on: June 15, 2020, 01:08:53 PM »

I have a '19 CVO StreetGlide that I am thinking of doing so engine upgrades to. The Stage IV kit comes with 11:1 pistons, does anyone know what the stock compression ratio is? With only 4K should I hone the cylinders?
Logged

Texas 103

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1483
  • FLHRSEI.ORG
    • TX

    • CVO1: 2016 "RGU"
Re: '19 117 Upgrades
« Reply #1 on: June 16, 2020, 07:54:32 AM »

I have a '19 CVO StreetGlide that I am thinking of doing so engine upgrades to. The Stage IV kit comes with 11:1 pistons, does anyone know what the stock compression ratio is? With only 4K should I hone the cylinders?

 Absolutely,! Better yet...send them and pistons to one the top notch  guys on this forum,  T-Man- Steve @ Fullsac, Kirby to mention a few. Do it right , zero deck cylinders, have them bored or honed the right way so they are nice and straight. You just bought some great peace of mind!!   
Logged
Too Much of a good thing is just right !! Then more is always better

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3118
Re: '19 117 Upgrades
« Reply #2 on: June 16, 2020, 12:21:08 PM »

This is always a problem, my opinion.  When honing in torque plates it can take a thousandth or more to get everything straight and true. Now you have too much clearance. Your cylinders will not be straight and true regardless of miles, this is distortion not wear. The solution is a +.010 piston or line2line coating the pistons and using a .005 os ring set. It is possible the original rings will be fine, dont know until they are checked in the refinished cylinder.  If you shop for a simple solution there will be those I assure you. Somebody will say "just ball hone it". Lol
Logged

jpgrfan

  • Newbie
  • *
  • Offline Offline
  • Posts: 16
    • UT

    • CVO1: 2019 CVO Road Glide
    • CVO2: 2013 CVO Road Glide Traded
    • CVO3: 2002 Road King Classic
Re: '19 117 Upgrades
« Reply #3 on: June 28, 2020, 08:46:50 PM »

So HD Street Performance, I have a 19 RG CVO. Not looking to go crazy but one recommendation was to do the following:

Fullsac headers and cores(2.0),S&S cam plate and oil pump, Fueling 465cam, adjustable pushrods, S&S lifters, stiffer clutch springs, and a power vision tuner. Thoughts?
Logged

FLSTFI Dave

  • IBA 69147
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6709

    • CVO1: 2023 FLTRXSE Whiskey Neat
    • CVO2: 2021 RA1250S Pan America Special
    • CVO3: 2003 Fatboy, 95"quot, S&ampS 570 gear drive cam
Re: '19 117 Upgrades
« Reply #4 on: June 29, 2020, 06:47:37 AM »

So HD Street Performance, I have a 19 RG CVO. Not looking to go crazy but one recommendation was to do the following:

Fullsac headers and cores(2.0),S&S cam plate and oil pump, Fueling 465cam, adjustable pushrods, S&S lifters, stiffer clutch springs, and a power vision tuner. Thoughts?
Save a lot of money and use the 2020 8 lobe Harley Oil pump.  Many top builders quit using the very Expensive S&S oil pump as it still had some sumping issues, and cost a fortune.  They are having better luck with the latest HD oil pump.

I am at 163 HP and 167 torque on my built M8.  I have just over 9K miles on the build.  I am running the HD oil pump, zero issues.  A good friend is running a similar build with similar numbers and is also using the HD oil pump.  We are both high milage riders.
Logged
2023 FLTRXSE Whiskey Neat
2021 RA1250S Pan America Special
2019 FLTRXSE Red Pepper / Magnetic Gray Traded
2018 FLTRXSE Gunship Gray  Traded
2017 FLHXSE  Starfire Black / Atomic Red  Traded
2015 FLTRUSE Abyss Blue / Crushed Saphire Traded
2013 FLHRSE5 Diamond Dust 117  Traded
2012 FLTRXSE White Gold Pearl / Starfire Black  Traded
2009 FLTRSE3 Silver/Titanium  Traded
2003 Fatboy, real fire paint set,

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3118
Re: '19 117 Upgrades
« Reply #5 on: June 29, 2020, 10:09:18 AM »

^^^^^^^ :2vrolijk_21:
Consider a Cycle rama CR480 or TTS 100 or TTS 150 cam for a stock bolt-in torque deal.
Logged
 

Page created in 0.142 seconds with 26 queries.