www.CVOHARLEY.com

CVO Technical => Electronic Toys and Gadgets => Topic started by: Axle507 on July 08, 2020, 09:27:13 PM

Title: 2013 road glide cvo abs and security light
Post by: Axle507 on July 08, 2020, 09:27:13 PM

Abs light and security key light coming on and turning off hit or miss 2013 road glide cvo? Happened before ended up being the voltage regulator but now my voltage holds steady at 14-15 volts. Any ideas?

Title: Re: 2013 road glide cvo abs and security light
Post by: SIKBIRD on July 08, 2020, 10:12:12 PM

May sound crazy but Check your turn signal bulbs, my security light was staying on and it turned out to be the running light part of my front turn signal bulb Was burned out. Changed the bulb and the security light went off

Title: Re: 2013 road glide cvo abs and security light
Post by: naitram on July 09, 2020, 08:33:28 AM

when i first changed front bulbs to LEDs i had the same issue. needed to add a load equalizer because of the voltage draw difference

Title: Re: 2013 road glide cvo abs and security light
Post by: Axle507 on July 09, 2020, 05:26:26 PM

Wow crazy you guys say that because I just put in LEDS in the front and come to think of it all this started after I put them in.. I'll look into it tonight. Thanks a ton guys!

Title: Re: 2013 road glide cvo abs and security light
Post by: skratch on July 09, 2020, 08:28:00 PM

yep, mine did the same when i added leds to the front and didn't use a signal stabilizer.  added the signal stabilizer from custom dynamics and no more problems.

Title: Re: 2013 road glide cvo abs and security light
Post by: Axle507 on July 16, 2020, 08:17:01 PM

I ordered the custom dynamics signal stabilizer  and installed it today and the security key light is normal now.but the abs light is still on? Any ideas ?

Title: Re: 2013 road glide cvo abs and security light
Post by: fastfreddy on July 17, 2020, 06:11:12 PM

did you ride it.... abs light will flash after you start motor till you get rolling