Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[dm930]

I noticed when I put on the directional signal is flashes slowly for a moment then quickly, yet both front and right turn signal lights work as they should.  I did replace the front turn signal bulbs with the Custom Dynamics LED bulbs and also plugged in the Custom Dynamics Brake light Strobe.  Simple install too.  Would that cause this?  Or this normal?

[Fired00d]

Sounds like you might need the load equalizer. Some bikes need them and some (newer... can bus I believe) don't.

 
Ride Safe,
Fired00d
 

[dm930]

Sounds like you might need the load equalizer. Some bikes need them and some (newer... can bus I believe) don't.

 
Ride Safe,
Fired00d
 

Can Bus systems don't need load equalizers.  I solved it by turning on the hazard flashers for 5 minutes and it synced the LED's to the ECM.  Fixed!

[Fired00d]

Can Bus systems don't need load equalizers.  I solved it by turning on the hazard flashers for 5 minutes and it synced the LED's to the ECM.  Fixed!

 
Ride Safe,
Fired00d
 

[CVOStreetglide]

I noticed when I put on the directional signal is flashes slowly for a moment then quickly, yet both front and right turn signal lights work as they should.  I did replace the front turn signal bulbs with the Custom Dynamics LED bulbs and also plugged in the Custom Dynamics Brake light Strobe.  Simple install too.  Would that cause this?  Or this normal?

You would have been good to go with the front LED lights with no equalizer but installing the rear strobe makes it mandatory. Eas fix just more $$$$$ 😃

[dm930]

You would have been good to go with the front LED lights with no equalizer but installing the rear strobe makes it mandatory. Eas fix just more $$$$$ 😃

Actually, it still didn't need the equalizer.  It needed to be synced to the ECM by turning on the Hazards for 5 minutes....