www.CVOHARLEY.com
Custom Vehicle Discussions => CVO™ Street Glide® => Topic started by: wiseasp on September 19, 2014, 08:00:06 PM
-
Just got the motor co color matched hard candy king tour pak. Great match. Can't believe it even had graphics on it already. (http://tapatalk.imageshack.com/v2/14/09/19/1cf1be7bf4d7eea068215ed520c4120b.jpg)(http://tapatalk.imageshack.com/v2/14/09/19/311da7429c69598641f9bf4cc587881d.jpg)(http://tapatalk.imageshack.com/v2/14/09/19/2477f3993c8177f8e2b0d1f3e0b931c4.jpg)(http://tapatalk.imageshack.com/v2/14/09/19/183d52daaf3932c7f212ec991312ff17.jpg)(http://tapatalk.imageshack.com/v2/14/09/19/3be682153dad4a13ce410dbc3a6e33e1.jpg)
Sent from my iPhone using Tapatalk
-
Very nice. How much for the TP?
-
Just got the motor co color matched hard candy king tour pak. Great match. Can't believe it even had graphics on it already. [IMG]
Sent from my iPhone using Tapatalk
Wow you got that fast, they told me about 1 month, looks great man thanks for posting :2vrolijk_21:
-
Very nice. How much for the TP?
$1300 plus all the stuff needed to mount it.
Sent from my iPhone using Tapatalk
-
Wow you got that fast, they told me about 1 month, looks great man thanks for posting :2vrolijk_21:
THANKS!!! I have a friend of mine who is pretty high up at the motor company. He was able to get it for me in 3 days.
Sent from my iPhone using Tapatalk
-
THANKS!!! I have a friend of mine who is pretty high up at the motor company. He was able to get it for me in 3 days.
Sent from my iPhone using Tapatalk
Do you know if you can get any trim lights on it, it sure would look great with a screamin eagle badge on the back too :P
-
Beautiful paint. Look at all that metalflake. I love it. Enjoy :2vrolijk_21:
-
Do you know if you can get any trim lights on it, it sure would look great with a screamin eagle badge on the back too :P
Funny you say that. I just installed the side market lights and installing the rear spoiler with lights right now!!!
Sent from my iPhone using Tapatalk
-
Funny you say that. I just installed the side market lights and installing the rear spoiler with lights right now!!!
Sent from my iPhone using Tapatalk
post up a pic when you light it up bro :2vrolijk_21:
-
They look a lot better with the lights. Looking good.
-
Here YA go so far. (http://tapatalk.imageshack.com/v2/14/09/19/35293fe082cac3527ef4a4be82a0f1f3.jpg)(http://tapatalk.imageshack.com/v2/14/09/19/0ecd283997819fc0c83b46177ffd25bb.jpg)(http://tapatalk.imageshack.com/v2/14/09/19/2fd612e85f3c8f6956cda42235cf28c8.jpg)spoiler running light
(http://tapatalk.imageshack.com/v2/14/09/19/cfb3947a20e70f1871945705ca86d23f.jpg)spoiler brake light
I just hooked up a 9v battery to test it. I'll get the side ones hooked up tomorrow.
Sent from my iPhone using Tapatalk
-
I'm going to get Screamin eagle painted on the back in the screamin eagle script...
Sent from my iPhone using Tapatalk
-
Something like this script. (http://tapatalk.imageshack.com/v2/14/09/19/67cb8b53c2a31f143c44555217d89792.jpg)
Sent from my iPhone using Tapatalk
-
Something like this script. (http://tapatalk.imageshack.com/v2/14/09/19/67cb8b53c2a31f143c44555217d89792.jpg)
Sent from my iPhone using Tapatalk
I think someone on the site makes/has chrome badges, thought I saw one on Jswerve's tour pack
looks sweet wiseasp :2vrolijk_21:
-
Just the script?
Sent from my iPhone using Tapatalk
-
(http://i1244.photobucket.com/albums/gg579/jswerve1974/2014-08-10140816_zps3283386d.jpg) (http://s1244.photobucket.com/user/jswerve1974/media/2014-08-10140816_zps3283386d.jpg.html)
:2vrolijk_21: :2vrolijk_21: :2vrolijk_21:
:coolblue:
-
HOLY CHIT!!! That would be PERFECT!!! Where can I get one?
Sent from my iPhone using Tapatalk
-
(http://i1244.photobucket.com/albums/gg579/jswerve1974/2014-08-10140816_zps3283386d.jpg) (http://s1244.photobucket.com/user/jswerve1974/media/2014-08-10140816_zps3283386d.jpg.html)
:2vrolijk_21: :2vrolijk_21: :2vrolijk_21:
:coolblue:
please tell where did you get that
-
They made a couple of batches of them. Let me see if I can find the link...
-
THANKS!!!!!
Sent from my iPhone using Tapatalk
-
http://www.cvoharley.com/smf/index.php?topic=86199.0
I'm gonna go get you a close up. They are awesome.
Jesse
-
Looks great! Oh yeah the chrome script would look real nice, I have one on the king tour pak. If it were me, I would try and get it in black! :2vrolijk_21:
-
I'll try tomorrow. Crap light tonight.
-
What car was on lift above your bike? Awesome Pak, I'm getting one in black with black hinges. Probably take longer than 3 days for mine. Haha
-
What car was on lift above your bike? Awesome Pak, I'm getting one in black with black hinges. Probably take longer than 3 days for mine. Haha
McLaren
(http://tapatalk.imageshack.com/v2/14/09/19/285a3f9d72deb60ef5282dce727d4035.jpg)(http://tapatalk.imageshack.com/v2/14/09/19/52aa2ab01993372c15b52235aa7b6722.jpg)
(http://tapatalk.imageshack.com/v2/14/09/19/57d8936bff21c8e5e1c732f285d5e89c.jpg)
(http://tapatalk.imageshack.com/v2/14/09/19/c2245a947fb47c0f26846664a5b3dd08.jpg)
Sent from my iPhone using Tapatalk
-
HOLY CHIT!!! That would be PERFECT!!! Where can I get one?
Sent from my iPhone using Tapatalk
I thought you would like that :huepfenlol2:
That certainly finishes off the a$$ end of TP :D
since we are blingin this thing out, does any one make a detachable sliding rider to passenger bracket, I've seen the legends sliding mount, but I don't think that's detachable
-
I went with the chopped tour pack with faring and led break lights.(http://tapatalk.imageshack.com/v2/14/09/19/d6e30d6ddebaa6c61eff7e6ddf3fd074.jpg)
-
Can you post a pic of the LED tail lights? Thanks
Sent from my iPhone using Tapatalk
-
Lol wise. There's more money sitting in your garage than my house is worth. You are a lucky man!
-
McLaren and a CVO. Now those are a pair of toys. Would be tough to decide which to take out.
I am thinking the black Screaming Eagle would look better on that tour pack then a chrome one.
Enjoy the new bike. She's a beauty.
Ride Safe
Jack
-
Wiseasp & Bloomer,
Your bikes look awesome with the addition of TP's. :2vrolijk_21:
The paint is spectacular and seeing that you're both "chroming things up", just a suggestion, why not consider the Kuryakyn chrome insert for the mail slot? That should make it disappear with the silver hard candy paint.
I still can't believe (especially on a $$$ CVO) that the MoCo didn't colour match the mail slot. :nixweiss:
Anyway, you both should be very proud of your customized beautiful bikes.
Grizzly
PS - For what it's worth... My personal preference: Chrome hinges & latch = Chrome SE Script... Black hinges & latch = Black SE Script
-
McLaren
(http://tapatalk.imageshack.com/v2/14/09/19/285a3f9d72deb60ef5282dce727d4035.jpg)(http://tapatalk.imageshack.com/v2/14/09/19/52aa2ab01993372c15b52235aa7b6722.jpg)
(http://tapatalk.imageshack.com/v2/14/09/19/57d8936bff21c8e5e1c732f285d5e89c.jpg)
(http://tapatalk.imageshack.com/v2/14/09/19/c2245a947fb47c0f26846664a5b3dd08.jpg)
That's what I thought, but now I got pics of it. Beautiful car!
Sent from my iPhone using Tapatalk
-
Thanks guys. I am blessed to have these toys. Can never take nothing for granted though...
Sent from my iPhone using Tapatalk
-
They made a couple of batches of them. Let me see if I can find the link...
Looks like me and three other lucky guys got the last 4 emblems left, perfect timing hope you were one of them Wiseasp :drink:
Jessie, Thanks Brother for hookin us up, when I saw it on your tour pack I knew you had to get it here :2vrolijk_21:
do you know if any one make a detachable sliding rider to passenger bracket, I've seen the legends sliding mount, but I don't think that's detachable
-
You're welcome.
Sorry I can't answer that one.
-
Looks like me and three other lucky guys got the last 4 emblems left, perfect timing hope you were one of them Wiseasp :drink:
Jessie, Thanks Brother for hookin us up, when I saw it on your tour pack I knew you had to get it here :2vrolijk_21:
do you know if any one make a detachable sliding rider to passenger bracket, I've seen the legends sliding mount, but I don't think that's detachable
Yup I did get one!!! Thanks again. I just sent the PayPal payment.
Rob
Sent from my iPhone using Tapatalk
-
Yup I did get one!!! Thanks again. I just sent the PayPal payment.
Rob
Sent from my iPhone using Tapatalk
Awesome
-
Sexy bikes and car in this thread for sure!!
Dumb question, but can u use the fullsize TP with the small backrest from the chopped pak? My wife doesnt like the wrap around.
-
Sexy bikes and car in this thread for sure!!
Dumb question, but can u use the fullsize TP with the small backrest from the chopped pak? My wife doesnt like the wrap around.
I'm not positive, but I believe the KTP comes pre-drilled with the holes for those arms rests you speak of. The new 2014 chopped TP holds a lot more than the old style, in case you didn't realize it, so it may have enough space for your purposes - just no 3/4 or full face helmets.
-
Damn, Im moving to slow and missed out on getting a chrome SE badge for my TP. Been out riding my new bike and visiting the HD York, PA open house. IF there is another one out there somewhere please send me a message.
-
I went with the king, if I'm going to have it on I want max storage, also got the 10" windshield today, the 7" look nice but it's worthless as chit
-
Verry Nice !!!!
-
$1300 plus all the stuff needed to mount it.
Sent from my iPhone using Tapatalk
My dealer is giving me 20% off the tour pack & acc., $1600 is just for TP
then you need to add another $1100, with everything your over $2600
52300360 - king T-pak pad - $300
53000221 - detachable mounting rack $200
57200086 - T-pak spoiler - $180
53000238 spoiler led - $100
53000302 - lid organizer - $134
Rob, did you get the smoked or red led on the spoiler
-
Smoked on spoiler and sides.
Sent from my iPhone using Tapatalk
-
Here is what I ordered. I did order more than just what was needed for the TP...(http://tapatalk.imageshack.com/v2/14/09/24/39f749fa31393323d5dad1de49fb5a8b.jpg)
Sent from my iPhone using Tapatalk
-
Thanks Rob :2vrolijk_21:
-
Hey I noticed in your parts list the premium saddlebag liners (part number 90200918), I was wonder if you were going to cut them or somehow re-mold them to make the fit over the protrusion on the inside of the saddlebags?
-
Hey I noticed in your parts list the premium saddlebag liners (part number 90200918), I was wonder if you were going to cut them or somehow re-mold them to make the fit over the protrusion on the inside of the saddlebags?
I cut them to fit in there...
Sent from my iPhone using Tapatalk
-
Do you by chance have photos of the liners in the saddlebags showing what they look like with the cut out? Thanks
-
Do you by chance have photos of the liners in the saddlebags showing what they look like with the cut out? Thanks
no I can take pics and post them later tonight or tomorrow.
Sent from my iPhone using Tapatalk
-
Thanks, I appreciate it.
-
Thanks, I appreciate it.
X2
-
I just hooked up a 9v battery to test it. I'll get the side ones hooked up tomorrow.
Sent from my iPhone using Tapatalk
Rob,
can you tell me what was necessary to get power to your tour pak, did you have to get a cable
-
You need the spoiler kit with the LED light and then PN 69201157. This is a extension wire from the bottom of your seat to the tour pak. The spoiler kit already comes with a "Y" to plug in. I tapped the wires from the side LED to the red and black from the spoiler wires. Those wires are running lights and the blue wire is the brake lights. Hope this helps.
Sent from my iPhone using Tapatalk
-
Bad Dad offer this wiring Harness...any one use this?
2014 Touring Wiring Harness - $65.00
Fits
Three section harness
(1) Section for run & brake
(2) Sections for run light, brake light & turn signals
2014+ Touring models
Bad Dad's 2014 Touring Wiring Harness gives you all the plug-n-play leads needed to add custom lighting to the back of your 2014 Street Glide, Road Glide, Electra Glide & Road King.
This custom wiring harness features two dedicated sections for running a run light, brake light & left/right turn signals and one additional section for routing an optional center-mounted brake light with run light or license plate lighting. This harness utilizes the 2014 Touring model's on-board CAN Bus system to control all of your LED functions without the need for an additional load equalizer.
Use for:
Bad Dad's 957 Taillights
Bad Dad's Flush Mount Lighting
Other custom wiring projects on 2014+ Touring models
All of Bad Dad's custom bagger parts are proudly made in the USA.
http://www.baddad.com/products/part/81009
-
cool, thanks guys :2vrolijk_21:
-
I know a few people have already posted pics of the Hard Candy King Tour Pac, but I felt compelled to share mine as well :coolblue:
-
just went with the side marker LED lights & the Air Wing luggage rack with the LED lights
-
another
-
inside with liner & organizer
-
oh yea one more with the SE emblem
-
Very, very nice. I'm debating about getting a chopped tour pak for mine but I think I'm going to hold off for awhile...
-
Very, very nice. I'm debating about getting a chopped tour pak for mine but I think I'm going to hold off for awhile...
I considered the chopped but I didn't like the the backrest they used, just didn't look right, plus this has more storage, the way I see it is if I'm going to have it hangin back there I might as well get the biggest bang for the buck :huepfenlol2:
-
Looking real smart, love your mods.
-
Were you able to find a batch number or any information or you interested in selling this tour pak? I have same bike and am interested in this tour pak.
Thank you
Byron
-
Were you able to find a batch number or any information or you interested in selling this tour pak? I have same bike and am interested in this tour pak.
Thank you
Byron
Byron,
The tour pak is available from Harley Davidson and can be found in the 2015 Harley Davidson accessory catalog. You can also visit your local Harley dealer who can look up the part number(s) and order it for you.
-
Were you able to find a batch number or any information or you interested in selling this tour pak? I have same bike and am interested in this tour pak.
Thank you
Byron
also one of our members listed all the parts above
Here is what I ordered. I did order more than just what was needed for the TP...(http://tapatalk.imageshack.com/v2/14/09/24/39f749fa31393323d5dad1de49fb5a8b.jpg)
Sent from my iPhone using Tapatalk
-
Yeah I posted all the parts needed.
Sent from my iPhone using Tapatalk
-
Following
Sent from my iPad using Tapatalk
-
Yeah I posted all the parts needed.
Sent from my iPhone using Tapatalk
:2vrolijk_21: yup thanks again Rob, did you get yours all together, post a pic when you get a chance
-
I posted pics before. Here they are again.
Sent from my iPhone using Tapatalk
-
Another one
Sent from my iPhone using Tapatalk
-
Just brought mine a while back, but finally got it installed, as you can see from the pic, don't have to worry about a rider.
-
Another pic.
-
Just brought mine a while back, but finally got it installed, as you can see from the pic, don't have to worry about a rider.
looks comfy, I wish someone made a detachable sliding bracket so you could adjust the TP from solo to 2up ::)
-
That is a hell of an idea.
-
That is a hell of an idea.
these guys make one but its not detachable and you have to use their seat for some reason
http://www.eglidegoodies.com/id464.html
-
Very nice! I want one for my bike. Do you think they can still be ordered being there is a paint problem?
-
I ordered mine 3 weeks ago and it took a week to come in. So, I would say yes, they might even have them sitting on a shelf waiting for a new home. I believe that is why mine came so quickly.
-
I ordered a chopped tour pack back on April 2nd, and it arrived 6 days later.
-
Do I need wire harness 69201157 if I put the side lights on my detachable tourpak?
-
Thanks, I'm going to the dealership first thing tomorrow. I want a detachable chopped tour pack for mine…
-
Got mine in less then a week. Put luggage rack and smoked taillight on. I think the engineer was smoked with the instructions and template. Had to take it all apart for the wiring and drill the hole the grommet!
-
I got mine in a few weeks. I put the detachable and put tourpak speakers on them. Boy was that a bear to tackle...nothing fit, it was all mods. :cucumber:
-
Hey guys, I have a question, I just got a king tour pack for my 15 Hard Candy SG. Dealer is telling me there is no way to put lights on it, I see from the pictures it can be done. How did you guys do it. What wiring harness did you use. Thanks
Sent from my iPad using Tapatalk
-
Hey guys, I have a question, I just got a king tour pack for my 15 Hard Candy SG. Dealer is telling me there is no way to put lights on it, I see from the pictures it can be done. How did you guys do it. What wiring harness did you use. Thanks
Sent from my iPad using Tapatalk
For just Running & Brake lights, this adapter plugs in right under the seat, simple Y adapter, unplug the black connector, plug this in and your done
http://www.harley-davidson.com/store/led-light-kit-wiring-harness
For Running, Brake & Turn signal lights, you have to go aftermarket HD doesn't make one
http://www.baddad.com/products/part/81009
-
Chopped tour pak in solo position painted by Joe Z. Had him paint the bag speaker grilles, docking hardware, and tour pak mounting bracket HC Mercury too. Joe did a great job. The paint is a perfect match.
-
Here's another shot from the rear...
-
Shay-D Glider, that looks really good. I hope to be able to order my tour pack soon.
-
Chopped tour pak in solo position painted by Joe Z. Had him paint the bag speaker grilles, docking hardware, and tour pak mounting bracket HC Mercury too. Joe did a great job. The paint is a perfect match.
The Joe fella is a pretty good painter and did a heluv-a job on that TP. great looking bike and the flames on top the TP looks awesome. Congrats on a beautiful bike.
-
Very Nice and some Great Work on the Painting !!!
-
Could someone double check my math? The list above seems to have extra items that are not required for the tourpak itself and looks like it's missing a harness or two. I have a HC Mercury SG and want to add the king TP with the spoiler with light and smoked side marker lights. I have paired down the list of what I need below and added in the harness I think will work for the spoiler. I have no idea if I need an additional harness for the smoked side lights. I already have the 4 point mount on the bike for the passenger's backrest. Could someone look over my part numbers to be sure I have everything I need? Thanks:
92200074DXX - King TP HC
90300030 - TP lock set (keycode needed)
57200086DYO - HC Spoiler
53000239 - Spoiler light smoke
52300260 - TP Pad
54352-09 - TP side marker light
53000323 - TP bottom liner
53000302 - TP Lid organizer
53000221 - TP QR Shelf
69200573 - Harness TP aux lighting
-
[The Joe fella is a pretty good painter and did a heluv-a job on that TP. great looking bike and the flames on top the TP looks awesome. Congrats on a beautiful bike.]
THANKS!! Joe Z. has done some beautiful work for many on this forum. I'm fortunate to live close to his shop. He is as nice a guy as you'll ever meet.
-
Got the TP installed, put a hold on the lights until i figure out what i want. Also added a Road Zeppelin Seat. Seat is very comfortable but New problem is new seat raises me up into the wind so I'm now on the hunt for a new windshield. Any Suggestions?
-
Got the TP installed, put a hold on the lights until i figure out what i want. Also added a Road Zeppelin Seat. Seat is very comfortable but New problem is new seat raises me up into the wind so I'm now on the hunt for a new windshield. Any Suggestions?
Here's the best as far as I'm concerned
http://www.clearviewshields.com/motorcycle-windshield/harley-davidson/harley-2014-electra-glide-street-glide-tri-glide-limited-windshield/
With the curve at the top it allows you to have a smaller shield to look over and still be protected from the wind.
I've enjoyed one of these for the past 10 years +
-
Another is Freedom Shields, I had one on my 2011 and loved it, just ordered one for my 15. It was with the CVO member discount and shipping $101 to my door for a 7" Dark w/recurve.
-
Got the TP installed, put a hold on the lights until i figure out what i want. Also added a Road Zeppelin Seat. Seat is very comfortable but New problem is new seat raises me up into the wind so I'm now on the hunt for a new windshield. Any Suggestions?
I was contemplating the same seat for the 2 up rides. I love the stock seat but for the passenger not so much. Any 2 up feedback?
Enjoy and ride safe!
-
I purchased it for 2 up riding, and my wife and I love it.
Sent from my iPad using Tapatalk
-
Another is Freedom Shields, I had one on my 2011 and loved it, just ordered one for my 15. It was with the CVO member discount and shipping $101 to my door for a 7" Dark w/recurve.
Plus 1
I also had one on my older SG, and put the same as above on the new one. This shield really improves the quietness in the rider area, as well as reduces the number of bug hits in the face! Even though the height is the same as the OEM.
-
Looks great and there handy you're going to like the extra room
Sent from my SM-G920V using Tapatalk
-
Did you use the smoked lights
Sent from my SM-G920V using Tapatalk
-
All finished... HC Tour Pak, Wing and Smoke Light with CVO Backrest. Along with SE 58mm Throttle Body, SE 259e cam, Perfect Fit Pushrods, Heavy Breather and D&D 2-into-1 Billet Cat exhaust.
-
One more pic...
-
Love mine.
-
Love mine.
Do share the info regarding your rear fender lighting !!! I have not seen that on a CVO SG
-
Those are H-D spoilers and lights on Tour-Pak and saddlebags. They work as running and brake lights. Have the Custom Dynamics® Gen2 Ultimate Magic Strobes Brake Light Flasher on rear. They really are sweet. Everyone I ride with either has them or are getting them. Really fires up the rear and makes you more noticeable when braking.
-
Those are H-D spoilers and lights on Tour-Pak and saddlebags. They work as running and brake lights. Have the Custom Dynamics® Gen2 Ultimate Magic Strobes Brake Light Flasher on rear. They really are sweet. Everyone I ride with either has them or are getting them. Really fires up the rear and makes you more noticeable when braking.
I was referring to the rear fender itself. it appears you have a tri-bar on your fender tip but rather than three its four bars, regardless I have not seen that on a CVO Model.