The first wheel has slightly different markings. Some are the same but the numbers are 081104 and it has an additional JWL stamp. That JWL stamp is something I have previously seen on car wheels, and is some sort of japanese test approval, don't know why that would end up on a H-D wheel...
But then it hit me that the numbers could very well be a date stamp. It would match the fact that the 021102 is a 2002 SERK wheel, and it would also confirm that the first wheel 081104 would be for a 2005 CVO Fat Boy and explaim why it has 3/4 inch bearings. Comments?
3/4" wheel bearings definitely not in a wheel from an 02 touring bike. Very likely you're right and it's from a Fatboy. If you try to set it up for the 1" bearings you might be ok; or might not.
Some of the wheels I've messed with that were originally for 3/4" bearings did not have a center hole with a large enough diameter to accept the spacer for a 1" axle. If that's the case you're only option is to have a machine shop bore the center of the wheel such that it will accept the larger OD spacer.