www.CVOHARLEY.com

Custom Vehicle Discussions => Screamin’ Eagle® Dyna® => Topic started by: Lennyiti on January 02, 2008, 02:38:20 PM

Title: Dressing up wire connectors?
Post by: Lennyiti on January 02, 2008, 02:38:20 PM

Well finally after 3 atempts and many bad thoughts I got the chrome turn signal switch covers installed and am now looking at next project. Since I have never been into this "chrome things up" before is there something that can cover up or dress up the wires and or there connectors? I will post some pictures for you to look at. Thanks again for the great input. 

Title: Re: Dressing up wire connectors?
Post by: Lennyiti on January 02, 2008, 02:39:25 PM

another

Title: Re: Dressing up wire connectors?
Post by: Lennyiti on January 02, 2008, 02:40:20 PM

another

Title: Re: Dressing up wire connectors?
Post by: Lennyiti on January 02, 2008, 02:41:25 PM

last one

Title: Re: Dressing up wire connectors?
Post by: Puzzled on January 02, 2008, 02:52:10 PM

Kuryakyn has covers for both the neutral light and starter wires.

(http://i191.photobucket.com/albums/z238/mlcorrell/2001%20Screamin%20Eagle%20Road%20Glide/233.jpg)

Title: Re: Dressing up wire connectors?
Post by: Boatman on January 02, 2008, 03:51:38 PM

Like Puzzled stated, Kuryakyn has a chrome cover for the neutral switch and the starter feed wire.  I have and like the MOCO neutral switch cover better.  Can't help you on the LH side.

Title: Re: Dressing up wire connectors?
Post by: bisounours on January 02, 2008, 03:58:56 PM

The HD chrome neutral switch # 33919-00


Jacques

Title: Re: Dressing up wire connectors?
Post by: sblade1948 on January 02, 2008, 04:06:51 PM

I noticed the digital temp gauge, what kind is it ? Would like to have one Thanks, Bob

Title: Re: Dressing up wire connectors?
Post by: Puzzled on January 02, 2008, 04:11:48 PM

Reply #4 is the HD brand with the level indicator. Don't waste your money! ;)

Title: Re: Dressing up wire connectors?
Post by: sblade1948 on January 02, 2008, 04:34:30 PM

Thanks, sure wish some one would make one. Lot of money in new motor just want to be careful.

Title: Re: Dressing up wire connectors?
Post by: murphy on January 02, 2008, 04:34:57 PM

Ditto... huge waste of money, they don't work, they leak and some become projectiles.

There are threads here that discuss all the problems with them.

Title: Re: Dressing up wire connectors?
Post by: Puzzled on January 02, 2008, 04:36:42 PM

Quote from: murphy on January 02, 2008, 04:34:57 PM

Ditto... huge waste of money, they don't work, they leak and some become projectiles.

There are threads here that discuss all the problems with them.

That is one of the new NON-Projectile units. I previously had the James Bond version. Still works just a bad though! ;)

Title: Re: Dressing up wire connectors?
Post by: Puzzled on January 02, 2008, 04:37:56 PM

Quote from: sblade1948 on January 02, 2008, 04:34:30 PM

Thanks, sure wish some one would make one. Lot of money in new motor just want to be careful.

There isn't a analog version for a Dyna? Backlit would be nice. :2vrolijk_21:

Title: Re: Dressing up wire connectors?
Post by: murphy on January 02, 2008, 04:41:57 PM

Quote from: Puzzled on January 02, 2008, 04:37:56 PM

There isn't a analog version for a Dyna? Backlit would be nice. :2vrolijk_21:

If I recall correctly Arlen Ness makes one.