www.CVOHARLEY.com
Custom Vehicle Discussions => CVO™ Softail® Convertible => Topic started by: Henrycm on May 09, 2012, 07:00:04 PM
-
I am looking to upgrade the speakers in the fairing, has anyone done this? Looking for better sound and more volume since adding my pipes. Second question, has anyone put speakers in the saddlebags?
Sent from my SPH-D710 using Tapatalk 2
-
Looks like I will be the first to try.
Sent from my SPH-D710 using Tapatalk 2
-
Either that or you haven't made the effort to utilise the handy search field provided to check out the infinite amount of other posts on the same subject???? :nixweiss:
-
What upgrade u r thinking about , the speakers themselves or will add more?
Sent from my iPad using Tapatalk HD
-
Sorry the only results I found via search were for the larger touring bikes, if you know of a thread I would greatly appreciate it.
I am looking to see which after market speakers others have used. I ask looking at the Polk series speakers to replace the current ones. Also had thoughts of doing some in the saddlebags.
Sent from my SPH-D710 using Tapatalk 2
-
What bike?
-
11 CVO softail Conv
Sent from my SPH-D710 using Tapatalk 2
-
Saw it somewhere else on the site but someone used the FiiO E5 Headphone Amplifier. Here's a link off Amazon:
http://www.amazon.com/FiiO-E5-Headphone-Amplifier/dp/B001P9EQH8/ref=sr_1_1?ie=UTF8&qid=1337132679&sr=8-1
-
Thanks for the replies, I ordered some Polk speakers and will be working on that this weekend
Henry
2011 CVO Softail Convertible
-
Since I got the bike , am actually satisfied with the volume & quality yet , I didn't install loud pipes so I will see then how this will affect the volume
-
Since I got the bike , am actually satisfied with the volume & quality yet , I didn't install loud pipes so I will see then how this will affect the volume
I'm so over the loud pipes lol...I had fat cats on my deluxe and had to ride with ear plugs...I'm luvin the stock exhaust :carrot:
-
I was thinking the same thing. The speakers put out enough volume.. they just lack on the low end pretty badly. Any luck finding replacements? Let me know what you find. I have a 2012 CVO Convertible in Abyss Blue.
-
This post talks about upgrading to Polk speakers as well as the amplifier.
http://www.cvoharley.com/smf/index.php?topic=78093.0;all
-
Since I got the bike , am actually satisfied with the volume & quality yet , I didn't install loud pipes so I will see then how this will affect the volume
Just started trying to upgrade the stereo! after fitting the Rinehart Crossback Pipes i cant hear anything once i get moving!
-
Yeah I have V&H Big Shots on mine... Music? What music? LOL That's what made me look into this.
-
Not sure why people are using 3.5" speakers. The originals are 4" speakers. I am going to try out some Infinity's and see how they work. I am also thinking of putting a small subwoofer in the right side saddle bag to assist in the low end. Has anyone done that??
-
Hi DeShark,
the stock parts only have a mounting plate with outline dimensions of a 4" speaker, not the membrane and quality of a 4" system.
The used parts in the HD bargain stock spaeker locks like a 1,5" ear-phone and that for more than $160 ....
By the way, the membrane dimensions of both is similar, HD stock 75mm versus Polk 72mm.
I think not that a third party 4" speaker with ferrite will fit in the existing fairing holes.
Sorry for my English.
-
The used parts in the HD bargain stock spaeker locks like a 1,5" ear-phone and that for more than $160 ....
Say what???
By the way, the membrane dimensions of both is similar, HD stock 75mm versus Polk 72mm.
Yeah I see that. But the frame on the 3.5" speaker is much smaller. You have to add a mount ring or something to fill the gaps like others have done on here. Thus my thoughts on using a 4" speaker.
I think not that a third party 4" speaker with ferrite will fit in the existing fairing holes.
That you are correct on. The magnet on the 4" Infinity is too big to mount inside without customizing the inner bottom of the speaker box. The speaker would drop in if not for that. The other issue is the original grill drops down on the outer speaker suspension which would need to be resolved. That and the case modification as made these a bad choice. To tell the truth I really didn't hear much difference between the speakers anyway. I had one of the Infinity's hooked up and one of the originals. I think the amp may be where the weakness lies. Do you hear much difference with the Polks with the original amp?? The Polks magnets drop in no problem?
-
Hi DeShark,
"Say what???"
after 1x new one under warranty, I know the prices for this "speaker".
77200-11A $162.35/pcs spare part listprice in US, in Germany €249,00/pcs..... >:(.
And the second is doing even croak at 1/3 volume now, that not so funny.
That's the reason why I want to change the the speakers.
"You have to add a mount ring or something"
Yes, of course that's my plan.
I have to cut the 2 "speaker-ears" and mount it with a distance ring with self-adhesive rubber grommet.
So I can still use the original stock grill and chrome ring on the original fix points.
"I think the amp may be where the weakness lies."
I agree, the internal small amp isn't a sound machine.
Yes at my the polk speakers sounds better than the stock speakers.
And for the price of $35.00 per pair, these sound 10 times better than the stock ;).
"The Polks magnets drop in no problem?"
Not really, it is possible but very narrowly. The right side is OK.
On the left side I have to relocate the cables and internal connectors, and maybe a little bit adapt with the "Dremel".
At the moment this project paused, because i have a injury on the left hand.
I think in January I can make a sample ring on the laser cutter to try the correct fit.
You can find a short look on the attached image, but the dimensions with subject to change.
-
Hi 0815Error,
Ok I understand now.. differences in languages. :) Yes, I agree with you.. the stock speakers just don't sound that good. However I am concerned that I go through all this and new ones sound no better. I guess it is worth the try. I am tired of taking apart the fairing. :) I want to figure out a solution that will complete this project once and for all. I rode today and used the stereo again. I added a subwoofer in the right saddle bag. It sounds good while the bike was off. When the bike was running, you could not even hear the subwoofer. So back to square one. Next, I thought of some 6x9's in the tops of the saddlebags. I hate to cut holes in them so I am leery of that idea too but that may be the only way to get some low end added to this system.
Sorry to hear about your hand injury. I have read where others have cut up the old speaker to save the mounting ring and glued the new speaker to that then mount it. That is not a bad idea. If you have a laser cutter available.. even better.
-
Ok!! I finally found some awesome 4" speakers to replace the stock ones. Many thanks to Dan Hunter at Rockford Fosgate for all the advice and support in my search for a better solution. Rockford Fosgate makes a sweet set of speakers that fit (barely)! They are the R14x2 Prime 4" speakers. To do the installation first start by trimming off the mounting tabs on the speakers. Next you have to make some small mods to the inside of the fairing but nothing a decent pair of dykes can't handle. All you need to do is trim the old screw mount pads by cutting them off from the inside of the hole outward to each side. The other mod you need to make is to trim about a 1/4 inch off the top of the fairing bottom mount pad. This is needed so the speaker drops all the way in. Otherwise the magnet hit this mount pad. You may also need to unmount the original amp if you are using it still as this will push on the magnet of the left speaker. You can slide it into the center area behind the volume controls.
Next I used some silicone adhesive around the opening lip where the speaker seats into the fairing. Drop the speakers in and make sure they are seated firmly. I positioned them with the speaker connections located to the inside. Next apply some silicone adhesive into the gaps between the fairing and speaker. They are there for the grill trim ring tabs. Just apply enough to seal the fairing to the speaker. Don't put too much in or it will interfere with the grill trim ring tabs. Next use several small dots of silicone adhesive to glue the grills to the trim rings. Let all that dry overnight. The next day wire up the speakers and reassemble the fairing and put it back on the Harley. The finished product can be seen in the pic. I would have posted more but I see you are limited to 1.. FAIL! If you want to see more let me know and I will send you all I have. Rock n Ride!
-
What did you end up doing to upgrade your speaker system on your CVO 2012. I have the same bike and wanting to upgrade. Thanks in advance