Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[TANK]

Please help!! I really don't want to get into building my own "custom" cables/harness..

Looks like I need to update the Audio on this so the boss can use her earbuds and listen to XM.

Is there a list of cables/wiring harness that I will need to change? Can I just buy the harness for a regular Ultra and add the console plug?

I also noticed that the wiring plug for the rocker switch panel only has half of the needed wires/pins, is there a upgraded harness for this as well?

I have been reading posts on this for 3 days now and I'm about ready to "nuk" it.. lol

[Para Bellum]

You might want to post this in Electronic Toys and Gadgets.  You'll get a lot more responses.

[TANK]

Thanks for the move.

I'm pretty sure after reading previous posts that I need the non ultra harness and the ultra console. I'm still in the dark about what cable/harness I need to get the left half of the inter-fairing switches to work?

[BluesRunner]

 a good car audio shop that has done bikes before might be able to rig up something for you. If they have the pin out of the radio plug.

[TANK]

Tanks.

[TIF2]

The FLHXSE2 is a different animal from a normal Ultra or standard Touring models.
Let me know what upgrades you are doing and I can let you know what you need.

I wouldn't trust an audio shop that has done other touring models because of the differences on the FLHXSE2

Rich

[TANK]

Planning on adding the xm and communication kit so she can use her headset. After that I will upgrade the audio on it as it is not very clear going down the road at 70.

[TIF2]

If youi want to add the comm kit you will need to create a fully functioning "6B" (audio interconnect) and add the required wires (3) for a functioning speaker switch in the fairing cap. It's a bit of work but can be done.

As was pointed out earlier you will need the non-ultra overlay harness in addition to the work above.

It's doubtful you will find a Dealer or an audio shop that knows exactly what to do.

Hope this helps ....

[TANK]

I ordered the Non-ultra overlay harness & the communications kit. You say the 6a & 6b is for the inner fairing switch?

[TIF2]

No ... the 6B connector is used to connect the required signals from the 23pin side of the radio into the non-ultra overlay harness. That is separate from adding 3 wires from the 23pin radio connector to the 105B connector that is used for the fairing cap switches.

[TANK]

Thanks.

[TANK]

Looking at the back of my radio, I do not see a 6A or 6B connector. I have installed the non-ultra overlay and do see the interconnect harness connecter. Also I am trying to find out where anyone is getting the cable, pins, & connectors for these mods?

[SORider]

I just came back from them trying to fix it for the fifth time. They replaced all the speakers and it is still not working. I have now contacted a lemon law attorney

[Mano]

I just came back from them trying to fix it for the fifth time. They replaced all the speakers and it is still not working. I have now contacted a lemon law attorney

Will like to hear how this one ends up. Please keep us posted.

[Mano]

I just came back from them trying to fix it for the fifth time. They replaced all the speakers and it is still not working. I have now contacted a lemon law attorney

http://www.cvoharley.com/smf/index.php?topic=67649.0

SORider check out this thread in the CVO Street Glide section.