Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: SE 462 Cam  (Read 3665 times)

0 Members and 1 Guest are viewing this topic.

Bearcat1

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 143
  • "I fly on the wings of Red Eagle"
SE 462 Cam
« on: January 07, 2022, 04:00:48 PM »

Has anyone at all installed the Screamin Eagle 462 Power Cam into a stock 117 with a good tune?  And if so, what were the results?  Certainly somebody has...
Logged

99 Blue flame

  • Newbie
  • *
  • Offline Offline
  • Posts: 34
  • www.CVOHARLEY.com
    • WI


    • CVO1: 1999 FXR3 Blue flame
Re: SE 462 Cam
« Reply #1 on: January 09, 2022, 12:55:40 AM »

 I don't know how a SE 462 compares. I have an Andrews 462 cam in my 107 M8. 110HP at 5450rpm and 126tq at 2950rpm. Both at the rear wheel.
Logged

CVO 2015

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 116
  • www.CVOHARLEY.com
    • CA

Re: SE 462 Cam
« Reply #2 on: March 26, 2022, 11:10:49 PM »

Has anyone at all installed the Screamin Eagle 462 Power Cam into a stock 117 with a good tune?  And if so, what were the results?  Certainly somebody has...
109hp/116 torque Torque on a tuned as much as possible SE tuner..Now the bike has a stage 3 122 with Cyerama 483 cams..131hp/143 t

Sent from my SM-N981U using Tapatalk

Logged

Marty811

  • Newbie
  • *
  • Offline Offline
  • Posts: 42
    • SD


    • CVO1: 2009 CVO Ultra-Traded
    • CVO2: 2014 CVO Limited-Traded
    • CVO3: 2017 CVO Limited-Traded. 2022 CVO Road Glide Limited
Re: SE 462 Cam
« Reply #3 on: March 27, 2022, 08:51:37 AM »

I had one installed on my new CVO Road Glide Limited last week. Hard to get dyno time in at the dealership. I’ll post the graph when I get it this coming week!
Logged

Marty811

  • Newbie
  • *
  • Offline Offline
  • Posts: 42
    • SD


    • CVO1: 2009 CVO Ultra-Traded
    • CVO2: 2014 CVO Limited-Traded
    • CVO3: 2017 CVO Limited-Traded. 2022 CVO Road Glide Limited
Re: SE 462 Cam
« Reply #4 on: March 30, 2022, 04:10:17 PM »

Here’s the Dyno sheet on my SE 462 cam installed in my brand new CVO Road Glide Ultra.
I was planning on leaving everything stock including the mufflers. Ha! Couldn’t do it.
I came from a 2017 CVO 114 with the SE 447 Torque Cam. Great setup, 98/120 on the 114.
A new 117 couldn’t match that and I didn’t want to go backwards in power. Looked at the SE Stage 3 122 kit but it didn’t come in black granite to match the cylinders. Like most people I didn’t consider the 462 cam immediately because this is a big and heavy touring bike and I wanted low end torque. My wife is always on the back as well. After seeing a couple of posts about this cam in a 117 I changed my mind. That big flat torque curve looks great! I haven’t picked it up yet but it should rip. The shop installed Krome Werks 4.5” mufflers with the DB killer performance baffles. No dip there! Stock head pipe.
I wanted a warranty friendly cam and tune to keep the warranty. I’ve seen the FM installed cams as well as others and they are impressive. More power to the guys who go that way but this setup looks like it will work for me with no worries on the road.
Logged

planenut

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1457
  • life is short enjoy the ride
    • NJ


    • CVO1: 2022 Road glide Limited Wicked orange Pearl and Blackhole
    • CVO2: 18 115 cvo limited anniversary #1068(sold)
    • CVO3: 15 cvo Limited Maroon and silver (sold)
Re: SE 462 Cam
« Reply #5 on: March 30, 2022, 04:16:07 PM »

Hi All
   Thanks for the sheet
i just did the se 462 on my 22cvo limited
had it at Daytona and all i can say is wow what a big difference  from my 18 cvo 117

i had the 462 se cam   fullsac exhaust hd sert  tab 4.5 with 2.5 baffles
at highway speed and twist the throttle it rips  as i say lol this dog hunts
no problem passing on the highway 2 up and will run to a 100 no problem  :bananarock: :bananarock:
jon jr
Logged
Fullsac headpipe TAb Performance 4.5 slash 2.5 baffles
SERT program   horsepower hd cam
freedom shields 13 in
Custom Dynamics full lighting Ft and rear
Soundz 6 speaker set up 1k amp
Legends Axeo ft and Revo A in rear

kojak

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1241
Re: SE 462 Cam
« Reply #6 on: April 16, 2022, 12:34:54 PM »

Getting ready to do it on my 2021 bronze armor, parts ordered. I have this cam on my RGS and really enjoy how that bike runs. Little more complicated install on my cvo since I want to reuse the bronze/copper pushrod covers. They have to take the top end off to take them off intact, I have a great tech that worked on my bikes or the past 20 years so I know it will be done right..
Logged
kojak
2022 CVO RGL
2022 Apex FLTRK Traded
2021 CVO Limited Bronze Armor Sold
2019 RGS Billiard Blue Traded
2017 CVO Limited Spiked Olive Traded
2016 CVO SG Stardust Traded
2013 CVO RG Atomic Orange Sold
2010 CVO SG Cobalt Sold
2007 CVO RK Blue Traded
2005 CVO EG Teal Traded
And some 20 other bikes over 45 years
 

Page created in 0.14 seconds with 25 queries.