Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 ... 11 12 [13]

Author Topic: 30t Pulley with a stock belt. It can be done!  (Read 75394 times)

0 Members and 1 Guest are viewing this topic.

Dan_Lockwood

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2497
Re: 30t Pulley with a stock belt. It can be done!
« Reply #180 on: October 21, 2019, 04:06:41 PM »

On my '09, which I believe is the same as your '12, I have cruise and the 6th gear light.  I did have to use my TTS tuner to change the speedo ratio number.  I rode with the GPS and then tweaked it, than rode again and tweaked the second time an it's exactly equal to my GPS.

I know that on some of the other mods, the primary EVO kit, you may lose 6th or cruise.  But mine has worked flawlessly.

Good luck with yours.  It's well worth the hassle to do the mods.  You'll love it.
Logged
Dan

2009 SERG Orange / Black
Board Track Racer Project, Ultima 113"/6spd
2021 Coleman UT400 Side By Side

rodrocket

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 159

    • CVO1: 2014 CVO Breakout - Molten Silver / Black Diamond
    • CVO2: 2006 V Rod Destroyer
Re: 30t Pulley with a stock belt. It can be done!
« Reply #181 on: October 21, 2019, 08:22:52 PM »

The Tri-Glide 30 Tooth pulley is a heavy little sucker has anyone tried to lighten it at all I am thinking along the lines of less rotating mass the better :)

Also does anybody know of a Chrome or Polished 70 Tooth rear pully that is similar the the wheel on a 2014 CVO Breakout

Logged

ultraglide12

  • Guest
Re: 30t Pulley with a stock belt. It can be done!
« Reply #182 on: October 22, 2019, 12:32:10 AM »

On my '09, which I believe is the same as your '12, I have cruise and the 6th gear light.  I did have to use my TTS tuner to change the speedo ratio number.  I rode with the GPS and then tweaked it, than rode again and tweaked the second time an it's exactly equal to my GPS.

I know that on some of the other mods, the primary EVO kit, you may lose 6th or cruise.  But mine has worked flawlessly.

Good luck with yours.  It's well worth the hassle to do the mods.  You'll love it.

kool thanx dan i hope to do it over winter if all goes well
Logged

ultraglide12

  • Guest
Re: 30t Pulley with a stock belt. It can be done!
« Reply #183 on: November 18, 2019, 10:53:08 AM »

hey is there a certain year tri glide i have to ask for for the 30t?  thanx
Logged

Dan_Lockwood

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2497
Re: 30t Pulley with a stock belt. It can be done!
« Reply #184 on: November 18, 2019, 05:08:08 PM »

I bought a new Falcon belt, 139t I believe and a used Andrews 30t sprocket.

Still have the new Falcon 139t belt if anyone is interested.  No mods necessary, just the sprocket and the Falcon belt...  ;D
Logged
Dan

2009 SERG Orange / Black
Board Track Racer Project, Ultima 113"/6spd
2021 Coleman UT400 Side By Side

rodrocket

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 159

    • CVO1: 2014 CVO Breakout - Molten Silver / Black Diamond
    • CVO2: 2006 V Rod Destroyer
Re: 30t Pulley with a stock belt. It can be done!
« Reply #185 on: November 18, 2019, 09:47:13 PM »

hey is there a certain year tri glide i have to ask for for the 30t?  thanx

this should get you in the ball park:  2011 Tri Glide Trans Sprocket is HD P/N 83595-11

regards
Rod
Logged

ultraglide12

  • Guest
Re: 30t Pulley with a stock belt. It can be done!
« Reply #186 on: November 18, 2019, 10:31:22 PM »

thanx rod now i got to start pricing it out soon
Logged

rodrocket

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 159

    • CVO1: 2014 CVO Breakout - Molten Silver / Black Diamond
    • CVO2: 2006 V Rod Destroyer
Re: 30t Pulley with a stock belt. It can be done!
« Reply #187 on: November 19, 2019, 12:06:13 AM »

thanx rod now i got to start pricing it out soon


your welcome

I bought mine through the Stealer but I am in Australia maybe you can get a better deal through a forum sponcer or one of the inde's

Logged

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4055

Re: 30t Pulley with a stock belt. It can be done!
« Reply #188 on: November 19, 2019, 03:58:19 AM »

Just wondering,..by moving the wheel back further, what's the affect on the brake pads in relation with the disc?
Logged

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50536
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: 30t Pulley with a stock belt. It can be done!
« Reply #189 on: November 19, 2019, 12:43:45 PM »

Just wondering,..by moving the wheel back further, what's the affect on the brake pads in relation with the disc?

Axle is the center point.
Logged

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4055

Re: 30t Pulley with a stock belt. It can be done!
« Reply #190 on: November 19, 2019, 01:49:44 PM »

Don't know why
I was thinking 09 the caliper being fixed to the swing arm.
Logged

timo482

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 860
Re: 30t Pulley with a stock belt. It can be done!
« Reply #191 on: November 20, 2019, 04:14:27 PM »

after all the troubles... i installed a chain drive - no need to remove or mess with the swing arm, and zippers will provide almost any ratio you want. be certain to install the master link with the removable part to the INSIDE, that way everything clears. all done, no other mods, quiet, works.
Logged

Dan_Lockwood

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2497
Re: 30t Pulley with a stock belt. It can be done!
« Reply #192 on: November 21, 2019, 08:01:23 AM »

after all the troubles... i installed a chain drive - no need to remove or mess with the swing arm, and zippers will provide almost any ratio you want. be certain to install the master link with the removable part to the INSIDE, that way everything clears. all done, no other mods, quiet, works.

Timo, you've got me curious now.

I may be miss reading what you've said, it's happened before... :(

Two questions:

1.  The chain is that close that the retainer snap will rub if not to the inside of the chain?

2.  How do you access the master link with the retainer snap to the inside?

Thanks and have a great day!
Logged
Dan

2009 SERG Orange / Black
Board Track Racer Project, Ultima 113"/6spd
2021 Coleman UT400 Side By Side

timo482

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 860
Re: 30t Pulley with a stock belt. It can be done!
« Reply #193 on: January 09, 2020, 07:40:26 PM »

sorry for the late reply... the rivet master link can go one with the removable plate out, but the pins are longer on the clip master link so, i found i had to had the removable plate and the clip on the inside. it does not hit hard enough to do any damage, but it could eventually either cause the clip to fall off [bad] or clearance the primary on its own.. there is plenty of room to get at it on the inside so i just did that.   it works really well.

the chain is about 1/16 wider than the stock 07 belt...





« Last Edit: January 09, 2020, 08:03:14 PM by timo482 »
Logged
Pages: 1 ... 11 12 [13]
 

Page created in 0.149 seconds with 24 queries.