www.CVOHARLEY.com

CVO Technical => Milwaukee-Eight => Topic started by: Mr D on December 25, 2020, 11:16:53 PM

Title: Andrews CVO 117 Cam
Post by: Mr D on December 25, 2020, 11:16:53 PM

It’s my understanding Andrew’s designed the epa compliant cam for the CVO 117, which is different than the OE grind in the 114’s
That being said, as a bolt in which Andrew’s grind would be a good upgrade for linear power from the epa cam.
Application CVO Tri Glide

Title: Re: Andrews CVO 117 Cam
Post by: Tail Rider on December 26, 2020, 08:39:01 AM

With the stock cam having an overlap of -26, anything to the plus side is better. If you're dead set on an Andrews cam, in a Tri- application I'd have to take a good look at the 460 or the 462...either would be quite an upgrade, I'd have to believe

Title: Re: Andrews CVO 117 Cam
Post by: scotman623 on December 26, 2020, 10:16:03 AM

I agree with the above statement... Look at the overlap number on the new cam you’re looking at... Stock is -26... So look and compare this...

Title: Re: Andrews CVO 117 Cam
Post by: 2019CVONH on January 23, 2021, 08:47:10 PM

Quote from: scotman623 on December 26, 2020, 10:16:03 AM

I agree with the above statement... Look at the overlap number on the new cam you’re looking at... Stock is -26... So look and compare this...

I have the Woods 22x-E and it rips 2019 CVO Stage 3


Sent from my iPhone using Tapatalk