Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[dominio01]

I am looking to put a pair of WO575 Wild Ones Chubbies on my 07 SEU.  I am looking for the cable lengths to use.  I have seen 4" over stock for all cables and I have seen 2" over stock on all but 4" on the clutch.  Anyone done this themselves and know for sure which will work on this bike?  I'd install the bars and then measure but am trying to keep the down time to a minimum.  Thanks for any help.

[hd-dude]

+2" on the throttle, idle, and front brakes. The clutch cable will work fine.

[dominio01]

Hd-Dude,

Have you done this on the 07 SEUC with the hydraulic clutch?  Thanks for the input.

[WVULTRA]

dominio01:

This is a good read:



Same procedure for '06 and '07.

 

[Boatman]

Hd-Dude,

Have you done this on the 07 SEUC with the hydraulic clutch?  Thanks for the input.

Hd-dude does this for a living and can furnish you with what you would need (Wild 1 bars and cables and lines).  Send him a PM..

[hd-dude]

Hd-Dude,

Have you done this on the 07 SEUC with the hydraulic clutch?  Thanks for the input.

Yes;
Once or twice . I have not had any issues with the hydro clutch. There has been enough free play to make it work.