www.CVOHARLEY.com
Custom Vehicle Discussions => 2001 FXDWG2/2002 FXDWG3 => Topic started by: cocoinc on January 01, 2011, 11:53:18 PM
-
I've owned my Switchblade for about 6 years and I purchased it with the fairing any ideas on how to get one? I have looked for used ones, and new ones to paint but have not been successful. Anyone know of a source or have gone through this?
-
If you haven't checked the Moco, I would do that first. I purchased a replacement chin spoiler about 18 months ago. If they don't have one, there are painters associated with this forum (or guys on this forum who know painters) that could paint one for you. I'm pretty sure LarryB could get one done for you.
-
Harley still lists the Headlamp visor kit#68129-97 Primed and #68129-98DH in Vivid black. I'm sure there are painters out there that can match it up.
Larry
-
Thanks guys, I had seen that fairing but it looked more squared off. I will check with a local guy and see how much he would charge to paint, what about the gold leaf flames? I saw a posting that had a link to some decals.
-
Be sure you ask your dealer if the Moco still has the painted and flamed fairing available. They may still have some. They will require your VIN to confirm you own a CVO.
-
Have your dealer do a dealer parts search for that part # I just found a chrome regulator for the 02FXDWG3 this way.....
-
I found the part number 68038-01WU it is listed for $516, more than the $129 for the black one, but when you factor in the paint and the flames I guess it does not seem out of range. I will call tomorrow to see if they have, perfect situation would have been a wrecked bike or someone who hates the fairing and would be willing to sell for less.
-
Try Jenni at Tri County - 20% Discount and she can find older parts! Really Good! Good Luck.
-
Emailed them, thanks.
-
I've owned my Switchblade for about 6 years and I purchased it with the fairing any ideas on how to get one? I have looked for used ones, and new ones to paint but have not been successful. Anyone know of a source or have gone through this?
I have a very nice used one I'll take $250 for
-
Just after the clutch job and new tires on my Ford Ranger, ouch. How does it attach to the bike, I am interested, just need to find resource$ Is that one already painted with the flames?
-
Just after the clutch job and new tires on my Ford Ranger, ouch. How does it attach to the bike, I am interested, just need to find resource$ Is that one already painted with the flames?
Yes , factory replacement. red & gold leaf flames
-
EBAY JUST HAD ON WITH A NICK ON IT FOR 100.00 CHECK IT OUT
-
Cant find it on Ebay :-(
-
Ace, where did you find on Ebay?? I tried searching every possible way, even completed listings and nothing.
-
Ace, where did you find on Ebay?? I tried searching every possible way, even completed listings and nothing.
it was sold about 1 hr before u sent the message but ill keep a look out for it
-
I've owned my Switchblade for about 6 years and I purchased it with the fairing any ideas on how to get one? I have looked for used ones, and new ones to paint but have not been successful. Anyone know of a source or have gone through this?
Have a nice used one with one small chip. PM me if interested, Greg
-
I am looking for one for a fairing for my 01, can't afford new, would even do a black one. I saw the red fairing posted above, does anyone have the part number for the black? HD #68129-98DH saw on a site for $219 but it says in bold that it doesn't fit the WG2.
Any other non-standard suggestions for fairings?
I may be selling the seat as well, pics to follow. It's in great condition, 5k miles on the bike total- always garaged. I like the Corbin Gunfighters and similarly sleek..
-
I have a complete front headlight off my wg3. It is MINT condition blue no flames.
I also have a Corbin Gunfighter custom made with REAL ostrage hide in grey.
Mike 1 530 927 9827
-
I have one off a 3 also, just the fairing.