Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: 08 SERK tail light  (Read 2241 times)

0 Members and 1 Guest are viewing this topic.

Screamin08

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 111
08 SERK tail light
« on: November 13, 2012, 12:58:40 AM »

How do you get to the tail light bulb on these tombstone tails. Please tell me you do not have to go from under the fender and unbolt the whole assembly :nixweiss:. Thanks everybody

Logged

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50536
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: 08 SERK tail light
« Reply #1 on: November 13, 2012, 02:26:21 AM »

Three screws through the outer body, gasket and lens.  See if this helps:

Logged

Screamin08

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 111
Re: 08 SERK tail light
« Reply #2 on: November 13, 2012, 04:36:28 PM »

Oh Ok, Thats what I thought, but when I took out the 3 screws, it was stuck on there good which made me believe that wasn't right. I will pull harder this time, LOL...Thanks!!
Logged

DionW

  • Newbie
  • *
  • Offline Offline
  • Posts: 4
  • www.CVOHARLEY.com


    • CVO1: FLHRSE3
Re: 08 SERK tail light
« Reply #3 on: May 08, 2023, 09:33:47 PM »

Oh Ok, Thats what I thought, but when I took out the 3 screws, it was stuck on there good which made me believe that wasn't right. I will pull harder this time, LOL...Thanks!!

@ Screamin08
Did you have any luck?  I have the same problem.
Logged
This is living’ Barry
 

Page created in 0.13 seconds with 24 queries.