Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[bhtko]

I have seen a lot of discussion regarding choices for curved license plate frames for the new CVO's.  The new Kuryakyn Curved License Plate Frame are now available and I have mounted one on my new 2012 SESG.  It is plug & play with LED lights for the plate which work great.  Simple to install and a nice clean look, IMO.

[mark]

do u have the kuryakyn part #?

[bhtko]

Mounting Backplate for CVO FLTRSE/FLHXSE  P/N 3146

Curved Lighted L.E.D. License plate Frame     P/N 3144

You can see them on the Kuryakyn website as well...

[CVOStreetglide]

I have seen a lot of discussion regarding choices for curved license plate frames for the new CVO's.  The new Kuryakyn Curved License Plate Frame are now available and I have mounted one on my new 2012 SESG.  It is plug & play with LED lights for the plate which work great.  Simple to install and a nice clean look, IMO.

So how is the top piece of chrome attached and can it be removed?

[bhtko]

The top piece of chrome - the plate frame - can be removed from the backplate and reattached very easily using the four screws at the corners.  Kuryakyn also has complete instructions on their website.  I would post the link here but I don't know if that is allowed. 

[JCZ]

The top piece of chrome - the plate frame - can be removed from the backplate and reattached very easily using the four screws at the corners.  Kuryakyn also has complete instructions on their website.  I would post the link here but I don't know if that is allowed. 

Yes, it is allowed.

[bhtko]

Yes, it is allowed.

Thank you for the heads-up!  Here is the link:  http://www.kuryakyn.com/Products/4145/Curved-License-Plate

[sinktip]

Does this setup require drilling?

[sinktip]

Nevermind. After following the link, I see how it works.

[bhtko]

Does this setup require drilling?

No drilling required! 

[mark]

can u post a pic taken from above the fender, looking down.  I wanted to know how far the plate frame sits away from the fender...see what happens when you post a pic!

[Retired Navy Chief]

I like the Yaffe Universal Stealth III License Frame Kit.  It shows no bolts requires no drilling and has a nice clean look.  can be found about 3/4 down this link
http://www.baggernation.com/products-body-plateholders.htm

[bhtko]

I like the Yaffe Universal Stealth III License Frame Kit.  It shows no bolts requires no drilling and has a nice clean look.  can be found about 3/4 down this link
http://www.baggernation.com/products-body-plateholders.htm

I like this look as well but, unfortunately, the police around here do not like it as much as I do.  The oval frame covers way too much of the plate, sticker, etc. to get away with around here... 

[mjb765]

I like the Yaffe Universal Stealth III License Frame Kit.  It shows no bolts requires no drilling and has a nice clean look.  can be found about 3/4 down this link
http://www.baggernation.com/products-body-plateholders.htm

I have that frame and really like  it.

[bhtko]

can u post a pic taken from above the fender, looking down.  I wanted to know how far the plate frame sits away from the fender...see what happens when you post a pic!

This is not the best pic... darn garage is too dark right now    ... but hopefully this gives you what you are looking for...