Topic: CVO Breakout Switch Botton (Read 2413 times)

ATH · « **on:** November 25, 2012, 10:35:45 PM »

Hello guys,

I am getting delivery of my Breakout mid December and was wondering (as i will be exporting the bike from the US) if there is a switch botton that can switch from a miles reading to Km reading?

gmeikle · « **Reply #1 on:** November 26, 2012, 02:22:37 AM »

Mate , hi from Perth western Australia ( also a Km/H country !)

I think what you're describing is the CVO Convertible ( AKA CVO Heritage !) speedo setup.

It can swap MPH to Km/H as you describe.At least the ones sold in Australia do just that.

The Breakout speedo guage looks analogue to me, and Km/H speedos will be a seperate part #

Would be interesting to see if I'm wrong on this, but I suspect not so !

Dash07 · « **Reply #2 on:** November 26, 2012, 07:00:33 AM »

No botton. The instrument settings are basically changed by TRIP switch and turn signal switches.

Configuring Speedometer Units (owner's manual P.47)
1. With the security system fob present, push the OFF/RUN switch to RUN.
2. Press and hold the TRIP switch until the speedometer units change (mph or km/h).

The analogue guage is tachometer. Speedometer is digitally displayed under it.

ATH · « **Reply #3 on:** November 26, 2012, 08:22:49 AM »

Great thanks for that:) i was worried that i will need to go to the dealer to do this for me

gmeikle · « **Reply #4 on:** November 26, 2012, 09:40:19 AM »

Ah-hah !

Will the HDI ( Harley-Davidson International ) bikes be the same then ?

I had a ride of a mate's 2012 CVO Convertible, and the speedo kept reverting to MPH from Km/H

Some kind of ECM glitch the dealer told him at the time !

Author Topic: CVO Breakout Switch Botton (Read 2413 times)

ATH

CVO Breakout Switch Botton

gmeikle

Re: CVO Breakout Switch Botton

Dash07

Re: CVO Breakout Switch Botton

ATH

Re: CVO Breakout Switch Botton

gmeikle

Re: CVO Breakout Switch Botton