www.CVOHARLEY.com
CVO Technical => Cleaning/Detailing => Topic started by: stumom on March 18, 2007, 01:04:42 AM
-
What are some of the way's to get rid of those nasty scratches on the tops of the bags and keep your paint lookin new?Thank's for the input........
-
Try the Glare products in the detailing thread :2vrolijk_21:
-
I had same problem, girlfriend drags foot across regularly. I use Meguiar's Mirror Glaze #2 fine cut cleaner, and it works great.
Bud
-
I had same problem, girlfriend drags foot across regularly. I use Meguiar's Mirror Glaze #2 fine cut cleaner, and it works great.
Bud
Ooooh bad bad. New girlfriend?
-
Ooooh bad bad. New girlfriend?
To remove existing scratches, I use a random orbital buffer with a VERY fine compound and then work my way up to a good polish. Choose the product you are most comfortable with.
To prevent future scratches, I'm going to be having the tops of my bags covered with 3M paint protection film, the same stuff that is put on the hood of cars to prevent rock chips.
Chief
-
To remove existing scratches, I use a random orbital buffer with a VERY fine compound and then work my way up to a good polish. Choose the product you are most comfortable with.
To prevent future scratches, I'm going to be having the tops of my bags covered with 3M paint protection film, the same stuff that is put on the hood of cars to prevent rock chips.
Chief
Hey Chief,
Let us know how that 3M clear film works out. And especially how it looks. I had thought about putting some on my fairing and lowers. For Bug protection!
-
To remove existing scratches, I use a random orbital buffer with a VERY fine compound and then work my way up to a good polish. Choose the product you are most comfortable with.
To prevent future scratches, I'm going to be having the tops of my bags covered with 3M paint protection film, the same stuff that is put on the hood of cars to prevent rock chips.
Chief
Can't beat an orbital buffer and Chief, I hope to have the 3M stuff on the SEUC this week as well. I will do the front fender, lowers, fairing and top of bags.
Pictures as soon as it's done and hopefully during application as well.
-
Can't beat an orbital buffer and Chief, I hope to have the 3M stuff on the SEUC this week as well. I will do the front fender, lowers, fairing and top of bags.
Pictures as soon as it's done and hopefully during application as well.
Rog
I know that they make pre-cut kits for cars (my wife has it on her Volvo). Do they make a kit for bikes or are you going to cut it yourself?
Dan
-
Rog
I know that they make pre-cut kits for cars (my wife has it on her Volvo). Do they make a kit for bikes or are you going to cut it yourself?
Dan
My installer was in last week doing a car and I asked if he had the pattern. He does and was going to give me a call when he could do it. I told him the pieces I was interested in (above) so I expect he'll be doing it this week. I am sure it will be more acceptable than a bunch of scratches and chips but it won't be as nice as the naked paint.
Just a trade off against screwing up a good paint job. If I don't like it a hair dryer and some 3M adhesive remover will take it off.
I figure with the number of people I have installing it on $100 plus thousand dollar Porsche's and living with it, it can't look too bad on the bike.
-
Renea will occasionally drag her foot across a saddlebag. Normally I can get out any scuffs with Glare Spider. That stuff WORKS. The surface looks good as new when I'm finished. It also works on the fuel tank where my legs rub on the fuel tank...........especially when I'm wearing chaps. I've had occasion to use the Glare Micro once, followed by Spider, and then Pro Polish. I have nothing bu great things to say about Glare. Great stuff. much better than anything I've ever used............including RejeX.
-
To remove existing scratches, I use a random orbital buffer with a VERY fine compound and then work my way up to a good polish. Choose the product you are most comfortable with.
To prevent future scratches, I'm going to be having the tops of my bags covered with 3M paint protection film, the same stuff that is put on the hood of cars to prevent rock chips.
Chief
Darn good idea - well worth copying.
-
Harley Swirl and Scratch remover... :bananarock:
Awsome stuff.
-
If there fine scratches and for swirl marks, Meguiar's ScratchX, or 3M Imperial Hand Glaze.
Sit in the shade, with a beer and watch the girlfriend buff them out! :bananarock:
-
If there fine scratches and for swirl marks, Meguiar's ScratchX, or 3M Imperial Hand Glaze.
Sit in the shade, with a beer and watch the girlfriend buff them out! :bananarock:
Does she have a sister?
Mark
-
Meguires scatch X does work geat, especially if worked by hand as its not overly abrasive.
Each time you do this, your removing a tiny layer of clear, so be carefull if repeated use is needed in the same area of paint, especially if the scratch is significant, you may only get one good chance to retain an intact clearcoat finish. My feeling is if you want to preserve your finish long term in areas where you seem to get continued scuffing from boots hitting the tops or edges of the hard bags, then maybe the 3M would work great even if this one small area.
-
I'll back ESJ Jester on this one. Glare Spider of the swirls and light scratches, and Glare Micro for the deeper scratches. The stuff works, and it is so easy to use. And man does it make the scooter glow when you finish.