www.CVOHARLEY.com
Custom Vehicle Discussions => CVO™ Road Glide Custom® => Topic started by: Capt.D on April 23, 2018, 02:03:24 PM
-
I'm looking at buying a set of pegs that will work on the crash bar that comes stock on my 18 CVO Road Glide. I'm on the short side at 5'10" with a 30" inseam so they'll need to come a little bit forward for me.... what ones are you using? Wanting to get some recommendations.
Sent from my SM-N950U using Tapatalk
-
Might check this out: https://www.harley-davidson.com/store/long-angled-adjustable-highway-peg-mount-kit-pa-07-5082907--1
-
I have these. Kuryakyn Longhorn Offset ISO Dually Highway Pegs. Tons of adjustability.
-
I have these. Kuryakyn Longhorn Offset ISO Dually Highway Pegs. Tons of adjustability.
I was just looking at those.
Sent from my SM-N950U using Tapatalk
-
Depends on how much stretch you want. HD makes the standard and long reach mounts - I went with the standards and I have you by about 2” on both height and inseam. I have mine positioned th where I can do toes on pegs/heel on boards or full foot on the pegs.
I couldn’t imagine the bike without them. I’d recommend the extended brackets just to give you some extra adjustability...but be aware that there’s really only one place to mount the brackets on the shorter RG bar, it kind of limits any up and down adjustments.
If your dealer is cool they’ll mount one of each for you and lightly snug them (tape the bars so you don’t scratch them) so you can see which mount works best for you.
Good luck.
-
You and I are the same size. I have these:
https://shopbigskyharley.com/products/airflow-footpegs-50500717?variant=5506570059804&gclid=EAIaIQobChMIkOrul-nW2gIVk8pkCh2WHQPTEAQYASABEgJ8JPD_BwE
UUNetBill is spot-on though.....we have limited room to mount them. I originally installed the long arms:
https://www.harley-davidson.com/store/long-angled-adjustable-highway-peg-mount-kit
but switched to the short arms because I didn't need them that far back....even with my short inseam. Here's a pic or two.
-
and another
-
and another
Thanks.... I almost ordered the long last night but decided to wait until we got in port and I have faster internet... Glad I did.... yours are exactly what I want...
Sent from my SM-T827V using Tapatalk
-
With the shape of the floorboards and the position and angle of the bars, these work really well for me. The longer arms didn't offer much of a different position from the floorboards themselves. Good luck in your hunt.
-
With the shape of the floorboards and the position and angle of the bars, these work really well for me. The longer arms didn't offer much of a different position from the floorboards themselves. Good luck in your hunt.
They're ordered...thanks again...these will get me through until I put the lowers on
Sent from my SM-T827V using Tapatalk
-
Just bought the short angled highway mounts today. 5'9" 30" inseam. Glad I looked at the road glides specials. The crash bar on the 18 CVO seems to be about 1 1/2 " to 2" closer to the rider than the original crash bars.