www.CVOHARLEY.com

CVO Technical => Intake/Exhaust/ECM => Topic started by: geezerglide on July 20, 2018, 02:13:21 PM

Title: Ful Sac DX Header and 2" Baffles replacement to STk HD 2011 CVO Street Glide
Post by: geezerglide on July 20, 2018, 02:13:21 PM
Bought a 2011 CVO Street Glide replaced the HD Stick Header with Ful Sac DX Pipe and put the 2" Baffles into the CVO Mufflers. Did a dyno pull to see the results.

See attached, seems ver erratic, will probably go with a TTS Tune and dyno,

Any comments?

Thanks
Title: Re: Ful Sac DX Header and 2" Baffles replacement to STk HD 2011 CVO Street Glide
Post by: hawgzilla on July 20, 2018, 03:06:22 PM
Get it tuned and show us the results.  You’ll be amazed.  Use the tuning device your tuning person knows best— hopefully that’s TTS.
Title: Re: Ful Sac DX Header and 2" Baffles replacement to STk HD 2011 CVO Street Glide
Post by: Rooster on July 20, 2018, 03:23:49 PM
Agree Leo, the AFR is all out of wack. Can't see you getting much fuel mileage like that. Proper tune will fix it all. :2vrolijk_21:
Title: Re: Ful Sac DX Header and 2" Baffles replacement to STk HD 2011 CVO Street Glide
Post by: geezerglide on July 20, 2018, 04:48:05 PM
hawgzilla/rooster,

Thos are my thoughts and intention.

Thanks,
Title: Re: Ful Sac DX Header and 2" Baffles replacement to STk HD 2011 CVO Street Glide
Post by: HOGMIKE on July 20, 2018, 05:50:02 PM
Quote from: geezerglide on July 20, 2018, 02:13:21 PM
Bought a 2011 CVO Street Glide replaced the HD Stick Header with Ful Sac DX Pipe and put the 2" Baffles into the CVO Mufflers. Did a dyno pull to see the results.

See attached, seems ver erratic, will probably go with a TTS Tune and dyno,

Any comments?

Thanks

Since you already have the Fullsac header and cores I would suggest getting the TTS AND map from them.
JMHO
If you are looking for a nice map with the tts and the setup you have now I have a couple of maps from my 2016 cvo that has the same setup with 1.75 cores, probably pretty close. Got them all from Steve at fullsac.
HOGMIKE