I got home last night and tried a few things. 1, wd-40 on switch and the switches on handlebars 2, checked battery terminals. I heard a clicking comming from the starter relay, I tapped the relay and the bike started. I checked the contacts on the relay everything is clean. I let the bike run for about 5 minutes, while I was getting a metric wrench for the battery (whats the deal with metric) I tightened the positive side of the battery, when I tried to start the bike it would crank but nothing. I had to go to my MC monthly club meeting so I couldn't continue. When I got back home I tried again, the bike started this time but is running real rough and the fuelpump light is staying on at all times. I dont want to take the bike into the shop (I dont trust these guys and I hate getting ripped off) Does anyone have any ideas? I didn't have any problems with the fuel pump before this. I checked and changed all of the fuses. The only thing I did was spray WD-40 on the switches and tap the start relay and Tighten the positive side of the battery. Thanks for any help you could give..... Dave