www.CVOHARLEY.com

CVO Technical => Intake/Exhaust/ECM => Topic started by: rbabos on March 07, 2019, 11:35:24 AM

Title: Target Tune Question
Post by: rbabos on March 07, 2019, 11:35:24 AM

I understand Lambda based cals have no clb tables but in a v rod AFR based cal it has clb tables. Are these tables actually used as in offsets for the AFR table in WB sampling?  Do they need to be left in the default 700 clbs as part of the cal converion to run TT or can they be altered and still have TT and WBs function normally. 
Ron

Title: Re: Target Tune Question
Post by: hrdtail78 on March 07, 2019, 12:31:17 PM

Closed loop bias tables are only in affect w/ narrow band closed loop.   There is no reason for them with a calibration made for developing rough calibrations.

Title: Re: Target Tune Question
Post by: rbabos on March 07, 2019, 12:57:15 PM

Quote from: hrdtail78 on March 07, 2019, 12:31:17 PM

Closed loop bias tables are only in affect w/ narrow band closed loop.   There is no reason for them with a calibration made for developing rough calibrations.

Thanks Jason. Ok,   so, the AFR table only,  is what the TT with WB sensors uses to set the ve tables, be it a Lambda cal or the older AFR cals?  CLBs in the current calibraion would only be in play if the NB sensors were used, should one want that later.
Ron