I'm sure this has probably been answered but, i like those bars. did you have to buy any additional parts (wires, hydr line extensions or mounting) for the install?
how much if a pain was feeding the wires threw the bars?
TIA
For the WO513's I was able to use all the stock lines and wiring. The hydraulic lines are easily long enough. The wiring was shortened, but still had just enough to work with. I think I would have liked the 10" vs the 8.5", but the wiring would not be long enough for that deal. I had to get the adapter to fit the CVO mounting area because the new bars are only 1 inch in the center and the bar mounting on our bikes is for 1 1/4 bars.
Running the wires thru the bars was not that bad, but taking the wiring connectors apart and back together was time consuming. I pulled the harness thru the bars tied with a thin cord and a little soap water. So, at the end of the day, I am happy!