www.CVOHARLEY.com
CVO Technical => Intake/Exhaust/ECM => Topic started by: Bucko911 on January 12, 2010, 05:13:38 PM
-
Does anyone know if the Doherty PACC will accept the stock 2007 SE air cleaner cover? I kind of like the look of the stock cover, but obviously, I need the increased flow.
-
Does anyone know if the Doherty PACC will accept the stock 2007 SE air cleaner cover? I kind of like the look of the stock cover, but obviously, I need the increased flow.
Yes it will.
Hoist! :coolblue:
-
It is a quality piece. I had one on my 07 SEUC.
john
-
Yea, I like it, quality workmanship. The only thing I'd say to do is make sure that there is no space between the A/C cover and the end plate. I made a spacer to fill this area, if there is, it can pull out on the end plate. Just put some modelers clay on the back of the cover and tighten it until snug, then remove the cover and measure the thickness of the clay, make a spacer that size or use washers. Some people had the stand offs break, it could be from this gap and the cover pulling out on the end plate. I've had mine on for several years with no problems.
Craig