www.CVOHARLEY.com
CVO Technical => Intake/Exhaust/ECM => Topic started by: Highjagger on January 13, 2010, 04:17:04 PM
-
What is the difference
These http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524448769851&FOLDER%3C%3Efolder_id=2534374302519163&ASSORTMENT%3C%3East_id=2534374302519163&bmUID=1263417158270&bmLocale=en_US (http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524448769851&FOLDER%3C%3Efolder_id=2534374302519163&ASSORTMENT%3C%3East_id=2534374302519163&bmUID=1263417158270&bmLocale=en_US)
and
these http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524448769848&FOLDER%3C%3Efolder_id=2534374302519163&ASSORTMENT%3C%3East_id=2534374302519163&bmUID=1263417251350&bmLocale=en_US (http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524448769848&FOLDER%3C%3Efolder_id=2534374302519163&ASSORTMENT%3C%3East_id=2534374302519163&bmUID=1263417251350&bmLocale=en_US)
Could somebody please explain ?
The only difference seems to be the "billet-tapered" .
What does this mean ?
-
Check out this article - What's Billet? (http://www.motorcyclecruiser.com/tech/term_billet_explained/index.html) for an explanation.
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Good Article- Thanks
-
I like the slash endcaps as well, however, I'm not sure they can be used on the 2010 SESG? The web cites they are designed for a 4 inch SE muffler but does not list the 64768-09/64769-09 mufflers on the 2010 FLHXSE as a possible fitment. Why won't they work or will they?
-
The billet ones are more expensive as they should be machined and or cast from metal and then machined. The cheaper ones are probably rolled and seam welded out of thin sheet material.
-
I like the slash endcaps as well, however, I'm not sure they can be used on the 2010 SESG? The web cites they are designed for a 4 inch SE muffler but does not list the 64768-09/64769-09 mufflers on the 2010 FLHXSE as a possible fitment. Why won't they work or will they?
,
They wont work out of the box, the mounting system is different, HD made an adapter that will allow the SE touring End Caps either piston, Fishtail or slash down to fit on the OEM CVO Mufflers.