Topic: Recommended builder in the Midwest (Read 4658 times)

Jbbrown73 · « **on:** September 16, 2014, 09:51:05 AM »

I definitely want to do cams this winter, and I will probably go ahead and have the lifters done that seem to be a problem with these engines. I am planning a couple of very long rides next summer, and Sturgis 2016 and I don't want to have to worry about this thing breaking.

My question is can someone recommend a good builder/tuner in the midwest that tunes with a race tuner? I am in Southern IL, 100 miles to St. Louis, 200 miles to Nashville, 200 miles to Memphis, 200 miles to Indianapolis, 350 miles to Chicago.

Ridgerunr · « **Reply #1 on:** September 16, 2014, 10:19:27 AM »

WFOLarry (Larry's Motorcycle Machining) for the engine,
Brian at Valley Racing for the tune. Both in Illinois.

Lever · « **Reply #2 on:** September 16, 2014, 01:47:05 PM »

x2 Brian and Dave at Valley racing .... FYI Valley racing is a authorize Harley Davidson extend warranty shop as well had my CVO tuned there end results ... very happy with out come of bike

GMR-PERFORMANCE · « **Reply #3 on:** September 16, 2014, 01:49:37 PM »

Jason from C&S is another to put on the list

HILLSIDECYCLE.COM · « **Reply #4 on:** September 16, 2014, 03:50:38 PM »

Quote from: Lever on September 16, 2014, 01:47:05 PM

x2 Brian and Dave at Valley racing .... FYI Valley racing is a authorize Harley Davidson extend warranty shop as well had my CVO tuned there end results ... very happy with out come of bike

Yep, those guys have tuned several of our set-ups, always great results.

Scott

Steve Cole · « **Reply #5 on:** September 16, 2014, 04:26:25 PM »

Quote from: Jbbrown73 on September 16, 2014, 09:51:05 AM

I definitely want to do cams this winter, and I will probably go ahead and have the lifters done that seem to be a problem with these engines. I am planning a couple of very long rides next summer, and Sturgis 2016 and I don't want to have to worry about this thing breaking.

My question is can someone recommend a good builder/tuner in the midwest that tunes with a race tuner? I am in Southern IL, 100 miles to St. Louis, 200 miles to Nashville, 200 miles to Memphis, 200 miles to Indianapolis, 350 miles to Chicago.

C&S Speed Shop 4802 Old Missouri Ave Alorton IL USA 618-271-1523

Jason is also a site vendor here

prodrag1320 · « **Reply #6 on:** September 17, 2014, 07:41:05 AM »

if you want to just go to one place,valley racing could easily handle the build & tuning

Lever · « **Reply #7 on:** September 17, 2014, 08:13:36 AM »

chicoman · « **Reply #8 on:** September 17, 2014, 08:18:47 AM »

Jim Kennedy @ paradise performance can do both, real close to you

Jbbrown73 · « **Reply #9 on:** September 17, 2014, 11:36:35 AM »

Quote from: chicoman on September 17, 2014, 08:18:47 AM

Jim Kennedy @ paradise performance can do both, real close to you

Quote from: Steve Cole on September 16, 2014, 04:26:25 PM

C&S Speed Shop 4802 Old Missouri Ave Alorton IL USA 618-271-1523

Jason is also a site vendor here

He tuned my 2008 Road King and did a great job. It was a Mastertune however. My Road Glide came with the SERT, so I will stick with it rather than spend on a Mastertune for the sake of having a Mastertune. Does Jason tune with the SERT?

Mr D · « **Reply #10 on:** September 17, 2014, 12:50:46 PM »

Quote from: Ridgerunr on September 16, 2014, 10:19:27 AM

Brian at Valley Racing for build & tune.

X2

Valley Racing Inc

Address: 259 W Delite Inn Rd, Beecher, IL 60401

Phone:(708) 946-1440

Steve Cole · « **Reply #11 on:** September 17, 2014, 12:52:00 PM »

Jason will build and tune with what you have. Give him a call.

ob1 · « **Reply #12 on:** September 17, 2014, 10:23:09 PM »

Jason at C and s in the Metro East is one in suggest.

prodrag1320 · « **Reply #13 on:** September 18, 2014, 07:56:56 AM »

I agree with jim kennedy too,i didn't know he was doing builds too

HILLSIDECYCLE.COM · « **Reply #14 on:** September 18, 2014, 09:26:17 AM »

..............and yes, Jim as well.

Scott

Jbbrown73 · « **Reply #15 on:** September 18, 2014, 10:14:54 AM »

Thank you all for the recommendations.

DRAGO B W · « **Reply #16 on:** September 20, 2014, 12:16:16 PM »

A little late but Plus 1!!! for CNS Speed shop Jason he is in your back yard!!!!

TorqueInc · « **Reply #17 on:** September 20, 2014, 11:50:32 PM »

Quote from: DRAGO B W on September 20, 2014, 12:16:16 PM

A little late but Plus 1!!! for CNS Speed shop Jason he is in your back yard!!!!

X3 or 4 for C&S

HILLSIDECYCLE.COM · « **Reply #18 on:** September 22, 2014, 07:26:24 AM »

BB Wolf · « **Reply #19 on:** September 22, 2014, 07:27:40 AM »

X?

for Jason at C&S

REDMAN · « **Reply #20 on:** September 22, 2014, 10:16:54 AM »

I also used Jason at C&S. He is a great guy to work with on a bike build, or just a tune.

Author Topic: Recommended builder in the Midwest (Read 4658 times)