Wanted to give you an update. Took the faring apart and removed the radio and the attached xm and cb modules. Printed all your info and took it to a local electronics repair shop after several discussions with the tech. Used all new shielded cables, he left me about 3' feet of excess out the back. Added a 3 way splitter and used electrical tape to make sure the connection was secure. Rerouted all wires from gps, radar detector, and Ipod. Used cable ties to keep them from possible harm by the steering head.
The result was amazing, absolutely no engine noise or interference. The stereo seperation is the best it has ever been and volume is clearer and louder.
If anyone can solder well or knows a good electronic tech, I highly recommend the modification. Clipping the trace works exactly as reccommended and both ports work fine. However the front stock port is too weak to use for long periods of time and will create static and engine noise. Not sure if you want to attempt to replace it as well.
Thanks, Framemaker