My new to me 03 FLHRSEI2 is showing the ET sensor code (check engine light) the HD box identified it as the PO118 ET code.
Has anyone had their switch itself fail?
I've checked the connection, followed the wires all the way to the loom and found nothing pinched, rubbed, or damaged.
The symptoms are as follows; appears to be running rich, stalling when idling, the idle is roaming all over the place, and takes several cranks to start it (sometimes).
It has a new battery, plugs, plug wires, PCIII that was mapped with the correct map (by their company).
Bike runs good, is not making any pinging noises or signs that its running too hot.
Is it possible the sensor is just going bad after 17 years?
I've got a new sensor on order. Just looking for advice on what else to check.
Thanks all