www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: 2008 Springer front brake pad  (Read 1333 times)

0 Members and 1 Guest are viewing this topic.

08springer

  • Newbie
  • *
  • Offline Offline
  • Posts: 48
2008 Springer front brake pad
« on: August 13, 2009, 08:06:33 PM »
I was cleaning the bike and noticed the front brake pad has a small thin shim pad glued to the pad itself. Mine was all smashed up inside the brake cylinder. I took the brake off and re glued the shim to the brake pad. I dont know if it will work so I guess I will just pick up a new pad this weekend. I figured I would mention it on the web site that way you guys could look at yours. One more thing does anyone know what I should torque the 2 allen heads holding the cylinder on?  Boy there sure isnt much holding that thing on there.
Logged

ordymun0904

  • Newbie
  • *
  • Offline Offline
  • Posts: 33

    • CVO1: 2009 CVO Softtail Springer
Re: 2008 Springer front brake pad
« Reply #1 on: August 13, 2009, 10:59:58 PM »
do you have the maint. manual for the 08?
i would hope it would have any torques needed listed in there.

ken
Logged
Keep it between the lines and in the wind!
 

Page created in 0.117 seconds with 24 queries.