Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[JCZ]

  Iwould rather have sirius ...how do i get it....

Subscribe to XM and you have all the sirius channels......they're both the same now.  Have been for awhile.

I have stock speakers and the Hog Pods and they work great even at 80 mph!   The wife got the Hog Pods first and once I heard the difference, I had to get mine on, too.

[JCZ]

Subscribe to XM and you have all the sirius channels......they're both the same now.  Have been for awhile.

I have stock speakers and the Hog Pods and they work great even at 80 mph!  The wife got the Hog Pods first and once I heard the difference, I had to get mine on, too.

By the way, the 105 in the lower left gauge is the oil temp.  The t120F that you see just below the speedometer is the head temp.

[mjb765]

By the way, the 105 in the lower left gauge is the oil temp.  The t120F that you see just below the speedometer is the head temp.

There you go-----advertising those damn Dakota's again!!!!  They do look really good though

[DICKW]

There you go-----advertising those damn Dakota's again!!!!  They do look really good though

Gotta rub it in, for those of us that are jealous.    Thanks buddy... 

[TEQUILA -aka- RED RUM]

By the way, the 105 in the lower left gauge is the oil temp.  The t120F that you see just below the speedometer is the head temp.

  Thank you JCZ.....Keith....going with hog pods......

[h-d mikey]

By the way, the 105 in the lower left gauge is the oil temp.  The t120F that you see just below the speedometer is the head temp.

Where did you tap in to get the head Temp?? Is it a stock sensor??

hd mikey

[Boatman]

Don't have a picture of a stock speaker, but here's what a great speaker looks like.  A stock magnet is 1.5-2" at best.

[mjb765]

Don't have a picture of a stock speaker, but here's what a great speaker looks like.  A stock magnet is 1.5-2" at best.

Had the same ones in my last bike--awesome speakers.   Will be ordering the updated versions for my SESG in a few weeks.

[JCZ]

Where did you tap in to get the head Temp?? Is it a stock sensor??

hd mikey

The same lead as your EFI

[hd-dude]

Where did you tap in to get the head Temp?? Is it a stock sensor??

hd mikey

This is a new feature with the Dakota Digital guages. The head temp is read from the serial data bus. The bike has a head temp sensor on the front cylinder head.

[Twolanerider]

This is a new feature with the Dakota Digital guages. The head temp is read from the serial data bus. The bike has a head temp sensor on the front cylinder head.

Those continue to look almost too tempting.  The blue gauges on JC's blue bike is an outstanding combination Jim.  Just how plug and play aren't they?  How much new or extra needs to be wired to exercise all the functions of the instruments?

[hd-dude]

Those continue to look almost too tempting.  The blue gauges on JC's blue bike is an outstanding combination Jim.  Just how plug and play aren't they?  How much new or extra needs to be wired to exercise all the functions of the instruments?

The only wiring to be done is for the oil temp guage. If you have one already then you can use the existing wiring but the sensor and the connector will need to be changed. The rest is truly plug and play. There is an additional harness to interconnect all of the guages, all plug-in. The added harness is a small guage 2 conductor cable that is for the dimming feature (there is a photocell in the face of the tach) and programming of the guages. Each guage has warning points that can be set. When you hit the set point the guage flashes.

[Twolanerider]

The only wiring to be done is for the oil temp guage. If you have one already then you can use the existing wiring but the sensor and the connector will need to be changed. The rest is truly plug and play. There is an additional harness to interconnect all of the guages, all plug-in. The added harness is a small guage 2 conductor cable that is for the dimming feature (there is a photocell in the face of the tach) and programming of the guages. Each guage has warning points that can be set. When you hit the set point the guage flashes.

Interesting.  Thanks Jim.  Already have the HD branded oil temp gauge in each bike.  So a wire from the sending unit is already a home run from the sender to inside the fairing.

The whole family always asks, "what do you want for Christmas?"  Maybe they could all go together....  Hmmmmmm .

[MKW]

I put a Hawg wired amp and speakers in and it sounds awesome.

I'm doing the XM module over the winter as well. 

mjb 765,

Which Hawg-Wired amp and speaker did you go with?  Does the red/orange color of the speaker show through?  What speaker covers do you have?  Geeze, I didn't mean to bombard you with questions it just happen 

[mjb765]

mjb 765,

Which Hawg-Wired amp and speaker did you go with?  Does the red/orange color of the speaker show through?  What speaker covers do you have?  Geeze, I didn't mean to bombard you with questions it just happen 

The amp is the PSC-1502 and the speakers were the older versions of the DX504-70 with stock speaker covers. They were on my 06 SG which was sold recently, but I don't recall really noticing the red speaker through the cover. I will be adding the amp which I removed from the old bike and ordering another set of DX504's to my new SESG asap. Hope this helps.....